how to fix reclining seat in dodge dakota

You search PDF repair manual about how to fix reclining seat in dodge dakota, if there are search results will appear below. If search results do not exist, please search by others keyword.



  how to fix reclining seat in dodge dakota Direct Download speed 5432 Kb/s

  how to fix reclining seat in dodge dakota Full Version speed 8172 Kb/s



2009 HONDA PILOT SECOND ROW SEAT COVER INSTALLATION INSTRUCTIONS

0

Filed Under (Honda Manuals) by admin on 17-10-2011

download
INSTALLATION Installing the Headrest Cover 1. While pressing on the headrest guide knob, remove the headrest by pulling it upward. Repeat the same procedure for the other two headrests. 2. Fit the three headrest covers over the headrests. HEADREST COVER HEADREST SECOND ROW SEAT HEADREST GUIDE Push. KNOB HEADREST HEADREST HEADREST HEADREST COVER CROSS SECTION HEADREST COVER 3. Slide the left second row seat to the foremost position. 4. Install the seat cover to the left seat back and insert the four flaps between the left seat back lining and left seat back. Secure the seat cover with two velcro fasteners. 5. Fold the left seat back and pull the seat cover between the left seat back and the left seat cushion. Attach two velcro fasteners to the left seat back lining as shown. 6. Tuck the seat cover under the headrest guides as shown. HEADREST GUIDE 2 VELCRO FASTENERS 4 FLAPS SEAT BACK LINING 2 VELCRO FASTENERS SEAT COVER LEFT SEAT BACK LEFT SEAT CUSHION 7. Install the seat cushion cover to the left seat cushion, then pull the seat belt buckles out through the holes on the seat cushion cover as shown.

Related Content:

01 yukon seat switch diagram, wiki how to fix honda pilot seat buckle, REPAIR WIREING IN 2001 YUKO FRONT SEAT, repair 2007 ody seat back, reinstalling diogram the driver seat in a 2000 jeep wrangler, install seat cover instructions for saab 9-3, how to replace seat covers in a lincoln navigator, free 2003 ford expedition wiring diagrams power seat, fix headrest on honda odyssey moving forward, do i need to reset steering angle on 2011 yukon after wheel alingment

2009 HONDA ODYSSEY THIRD ROW SEAT COVER INSTALLATION INSTRUCTIONS

0

Filed Under (Honda Manuals) by admin on 25-10-2011

download
INSTALLATION NOTE: Do not install seat cover to the front seats. 1. Push the knob to release the rear seat head rests shown. KNOB Push. REAR SEAT HEAD REST COVER REAR SEAT HEAD REST REAR SEAT HEAD REST BOTTOM SIDE 2009 ODYSSEY AUG 2008 AII 4023 cover onto the head rest from the bottom side as Improperly covering the front seat back can prevent from the rear seat. Install the rear seat head res 2. Install the rear left seat cover to the rear left seat in the following order ( ) . Push in. REAR LEFT SEAT REAR LEFT SEAT COVER REAR LEFT SEAT VELCRO FASTENER VELCRO FASTENER Push in. REAR RIGHT SEAT COVER REAR RIGHT SEAT VELCRO FASTENER VELCRO FASTENER REAR RIGHT SEAT Push in. 3. Install the rear right seat cover to the rear right seat in the following order ( ) . Install the headrests back onto the rear seats. Make sure the head rest button is not covered.

Carbon Fiber Seat Heater Installation Instructions

0

Filed Under (More Manuals) by admin on 18-04-2012

download
Installation Summary – Overview 1. Remove the existing front or rear seat covers. 2. Take note of whether the covers reattach by way of Velcro or Hog rings. 3. The Wire Connector with Purple & Black colored wires is seat the connector which will enable the use of both High & Low temperature functions. 4. Place the heating pads on the seat and at the Listing Reattachment Area mark the pad with a pen. You will be cutting 2 holes per pad. The holes should be equidistant. Example: If your listing length for Velcro or hog rings is 12′ in length then, make a hole at the 4″ & 8″ point. (The Seat Heaters may also be trimmed in length) 5. Now separate the protective adhesive backing at the backside of the heating pads and carefully align your pad and holes with the listing area and press the pads against the seat foam to secure the pad in place. 6. Reinstalling the Covers: Tip: For Backrest Covers, turn the cover inside-out and roll the cover back down the backrest, then reattach the plastic clips. For Seat Bottoms, start by attaching your Velcro or hog ring listings and then proceed to work outwards. Don’t work from front to back or from left to right – start from the middle then work outwards! 7. Switch Location: The diameter of the hole for the switch is 13/16″ or 21mm & the most common location for the switch is on the plastic trim located at the side of the seat. 8. Power Sources: The most common sources are the Accessory Panel, Power Seat, Cigarette Lighter/Accessory Outlet, and Steering Column. However, we recommend drawing power via a relayed key- start trigger sourced directly from the battery. This avoids onboard electronic system interference. ***Warning: If you are installing seat heaters into a vehicle which has a Passenger Side Occupancy Detection System for the Air Bags , You Must Observe The Following: When you remove the seat bottom seat covers, identify whether or not the seat is equipped with topside sensors. They are usually visible and resemble flat circular disks which are interconnected or rectangular in shape. If you are uncertain, you must contact a service department professional for confirmation. Toyota, Kia and Hyundai usually locate the sensors on top of the seat bottom core foam. Honda usually locates the sensors on the face of the seat backrest. In either case, for that particular seat (usually passenger sides only) use only the 2-temp wire connector with one of our seat heater pads. (Disconnect one of the other pads – you will not need it) *The dual temperature wire connector is attached to a black and a purple wire. This will allow dual temperature function with the use of only a single pad

Related Content:

renault df072 passenger second row seat belt pretensioner

2009 HONDA ELEMENT REAR SEAT COVERS INSTALLATION INSTRUCTIONS

0

Filed Under (Honda Manuals) by admin on 14-10-2011

download
INSTALLATION NOTE: Be careful not to damage the seats. Installing the Headrest Cover 1. While pressing on the headrest guide knob, remove the headrest by pulling it upward. 2. Fit the headrest cover over the headrest, and adjust it so that it fits smoothly over the edges. Secure the Velcro fastene Installing the Seat-back Cover 3. Fit the seat-back cover over the seat-back, and adjust it so that it fits smoothly over the edges. Secure the Velcro fasteners. 4. Reinstall the headrest. Installing the Seat Cushion 5. Fit the seat cushion cover over the seat cushion, and adjust it so that it fits smoothly over the edges. 852603AH SEAT-BACK COVER VELCRO FASTENERS SEAT-BACK 852604AH SEAT CUSHION SEAT CUSHION COVER 6. Lift the seat and secure it to the side with the seat strap. 7. Secure the seat cover with the Velcro fasteners. 8. Return the seat to the original position. 9. Repeat steps 1 through 8 to install the left rear seat cover. USE AND CARE To clean the seat covers, follow the instructions described on the label sewn to the side of the seat-back cover

1998-2002 (LH) Dodge Intrepid and Chrysler Concorde and 300M Driver’s Seat Recliner Bolts Service Procedure

0

Filed Under (Dodge Manuals) by admin on 23-11-2011

download
A. Service Procedure for All Vehicles Equipped With MANUAL Seat Adjusters and 2000-2002 Model Year Vehicles Built AFTER January 1, 2000 (MDH 0101XX) Equipped With POWER Seat Adjusters. 1. Move the driver’s seat to the rearward-most position and raise the seat to its highest position (power seat only). 2. Adjust the seat back to the full forward position. 3. Remove the two side screws (power only) and the rear screw (all) from the seat side shield and then rotate the shield away from the rear of the seat (Figure 1). 4. Using a ¼” drive air ratchet and a T30 Torx bit (Snap-on P/N TTX30E or equivalent), remove the outboard recliner paddle-to- seat back frame bolt (Figure 2). Service Procedure Figure Safety Recall No. C04 — Driver’s Seat Recliner Bolts Page 4 5. Using a ¼” drive air ratchet and a T30 Torx bit, install one of the supplied bolts into the hole in the recliner paddle (Figure 3) and then into the hole in the seat back frame. Using an inch-pound torque wrench, tighten the bolt (without the nut attached) to 90 in-lbs (10.2 N?m). NOTE: If the seat back frame threads are stripped, tighten the bolt as much as possible and then install and tighten the nut. IMPORTANT: Use the proper size torque wrench. Do NOT over tighten. Do not use a foot-pound torque wrench. 6. Install one of the supplied nuts onto the bolt (Figure 3). While holding the bolt stationary, tighten the nut to 110 in-lbs (12.5 N?m). 7. Repeat Steps 4-6 for the inboard recliner paddle-to-seat back frame bolt. 8. Install the seat side shield. Tighten the screws securely. 9. Return the driver’s seat to its original position and then return the vehicle to the customer.

Related Content:

how to repair Dodge ram front seat recliner, toyota sienna reclining mechanism, 2002 300m heat control schematic, 2002 chrsyler concorde manual, 2002 chrysler concorde service manual, dakota seat Recliner Assembly Diagram, pawl and ratchet assembly for lazy boy

HONDA Front Seat Belt Replacement Warranty Policy

0

Filed Under (Honda Manuals) by admin on 24-11-2011

download
CUSTOMER INFORMATION : The information in this bulletin is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely maintain your car. These procedures should not be attempted by “do-it-yourselfers,” and you should not assume this bulletin applies to your car, or that your car has the condition described. To determine whether this information applies, contact an authorized Honda automobile dealer. ? 1996 American Honda Motor Co., Inc. – All Rights Reserved . ATB 14788-17665 (9601) 1 of 2 JAN 22, 1996 92-012 BODY ALL 1986 and later Applicable To Model File U nder Issu e D ate Bulletin N o. Service Bulletin Front Seat Belt Replacement Warranty Policy (Supersedes 92-012, dated March 13, 1992) Warranty policy for front seat belt replacement is to replace either the belt/retractor mechanism or the buckle when either does not work properly. Warranty covers the replacement of the failed half of a belt, not the entire assembly (see PARTS INFORMATION ). NOTE: For 1970 through 1985 models, seat belts are replaced as a complete assembly under a separate warranty policy. COMPONENT REPLACEMENT Front seat belts are made by several suppliers, and some are sold as individual components (two separate halves); they are not stocked as a complete set. Therefore, whenever you replace a belt, make sure the new belt half is the same type and from the same manufacturer as the original – otherwise, the belt may not buckle properly. To determine the manufacturer and type (or “model”) of the belt, look for the white tag on the original belt in the car. The tag is on the retractor side of the belt (visible at the lower attachment point), or on the belt if you pull the belt all the way out. From the tag, mark down the manufacturer’s name (either Nippon Seiko K.K. or Takata), the belt “model” number and the date of manufacture. If the tag is missing or illegible, look on the buckle component for the name Nippon Seiko K.K. or the stylized “T” mark () for Takata. NOTE: Some belts may have NSK Warner K.K. as the manufacturer’s name. Use Nippon Seiko K.K. belts as the replacement. Take the information to your Parts Department to order the proper replacement belt. NOTE: For more information on seat belts and seat belt related items read: -Twisted Seat Belt (ServiceNews, July ’85) -Seat Belt Testing and Repair (Service Bulletin 86-014, August ’86) -Automatic Seat Belt Troubleshooting (ServiceNews, May ’89) -Lap Belt Retracts Slowly (Service Bulletins 90-003, January ’90 and 90-012, April ’90) -Torn Seal on Seat Belt Track (Service Bulletin 91-004, March ’91) -Slow to Retract Seat Belt, Cleaning the Guide Ring (ServiceNews, April ’91) -Accord Shoulder Belt System Wire Colors (ServiceNews, May ’91) -Seat Belt Slow to Retract (Service Bulletin 91-030, December ’91) Refer to your Service Bulletin Index and the ServiceNews Index for model specific information. Most repairs do not require seat belt component replacement. PARTS INFORMATION For front seat belt replacement ordering information and availability, contact your parts center.

Related Content:

1986 chevy c10 new belt, 2004 chevy malubu surpupten belt replacement on a 2 2 liter on you tube, installing new rotors on a 1992 ford f250 4wheel drive, snugtop glass button bolt, replace sun visor 09 honda accors, repairing seat belt in dodge dakota, how to replace seatbelt pretensioner 2004 crv, how to repair a seat belt retrackter on toyota hi lux, how to change out a drive belt on 2004 chevy malibu 3 5 liter, how to change a serpente belt on 2006 2 2 malibu

Toyota Prius GEN 2 Driver Side Extender Guide Installation Manual

0

Filed Under (Toyota Manuals) by admin on 01-04-2012

download
Installation Guide: Thank you for purchasing extendmyseat brackets. Please follow the directions carefully and within 30 minutes you will be loving your new seats. Inventory in Box: 2- extendmyseat brackets 4- black 3/8 stainless bolts What you will need for assembly: 1- socket wrench 1- 9/16 socket 1- Metric 13 socket (Prius uses metric bolts however a 9/16 works) 1- 9/16 flat wrench 1- protective eyewear Step 1- Remove the 2 Black extendmyseat brackets from the packaging and locate the 4 black 3/8″ provided bolts. Step 2- Go to your vehicle with a socket wrench and a 9/16 socket, eye protection and your keys. Remember to turn off your cabin lights. Step 3- Locate the 4 factory bolts that hold your drivers seat to the vehicle. Take your socket wrench and loosen the 4 factory bolts. (2 in the front and 2 behind your seat, go to rear seat to locate) Remove the 2 plastic guards to locate the 2 rear factory bolts. Remove the 4 factory bolts and set them aside Step 4- Unplug the 3 factory cables plugged into your car seat under the front portion of the seat. No tools required. Remember to plug these back in after you have completed the install. Step 5- Remove your car seat carefully. (Approx weight is 25 pounds) Step 6- Place your driver’s seat on a bench or on the ground on a clean sheet, towel etc…(don’t want to et it dirty) Step 7- Grab the 2 extendmyseat brackets Step 8- Lay down the 2 black brackets inside your vehicle and line up the 4 hole location. Start with the front 2 holes. Finger tighten the 2 front factory bolts into the 2 front EMS bracket holes. Now line up the 2 rear holes and finger tighten the 2 remaining factory bolts. Finger tighten all 4 holes with seat still out o f the Step 9- place drivers seat back into the vehicle. Line up drivers seat front holes with EMS front holes. Finger tighten front 2 feet with provided EMS bolts. Press seat lever and slide seat to the most up front position. Go to back seat and screw down the remaining 2 factory feet with the factory bolts. Then the 2 remaining EMS bolts into the remaining 2 EMS holes. Place the 3rd EMS bolt into the (B) bracket and the 4th and final bolt into the (A) bracket closest to the outside of the vehicle. Step 10- ONCE ALL 8 BOLTS ARE FINGER TIGHT; NOW COMPLETE THE INSTALLATION BY SECURING THE 8 BOLTS (4 factory and 4 EMS). CHECK TO MAKE SURE ALL 8 BOLTS ARE NOW TIGHT AND SECURE.

Related Content:

prius2 extendmyseat

2000 Dodge Dakota & Durango Power Windows ADJUSTMENTS

0

Filed Under (Dodge Manuals) by admin on 18-06-2012

download
ADJUSTMENTS WINDOWS Remove door trim panel. See DOOR TRIM PANEL under REMOVAL & INSTALLATION. Loosen bolts holding window to regulator. Raise window fully, seating window in frame. Tighten bolts. Install door trim panel. TROUBLE SHOOTING POWER WINDOWS On Dakota, inspect circuit breaker No. 20 (20-amp) in junction block. On Durango inspect circuit breaker No. 21 (25-amp) in junction block. On all models, junction block is located on left end of instrument panel. Inspect fuse No. 9 (40-amp on Dakota, 50-amp on Durango) in Power Distribution Center (PDC). PDC is located in left front corner of engine compartment. Inspect power window system ground circuit. See WIRING DIAGRAMS . SYSTEM TESTS ALL WINDOWS INOPERATIVE Dakota 1. Check circuit breaker for power window system. See TROUBLE SHOOTING . Replace circuit breaker as necessary. If circuit breaker is okay, go to next step. 2. Disconnect negative battery cable. Remove driver’s front power window switch. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Check for continuity between ground and terminal No. 3 (Black wire) at driver power window switch wiring harness connector. If continuity exists, go to next step. If continuity does not exist, repair open in Black wire between driver power window 2000 Dodge Durango 2000 ACCESSORIES & EQUIPMENT’ ‘Power Windows – Dakota & Durango 2000 Dodge Durango 2000 ACCESSORIES & EQUIPMENT’ ‘Power Windows – Dakota & Durango switch connector and ground. See WIRING DIAGRAMS . 3. Connect negative battery cable. Turn ignition on. Measure voltage between ground and terminal No. 5 (Tan wire) at driver’s power window switch wiring harness connector. If battery voltage is present, check driver power window switch. See POWER WINDOW SWITCH under COMPONENT TESTS. If battery voltage is not present, repair open Tan wire between driver power window switch connector and ignition switch. See WIRING DIAGRAMS . See POWER DISTRIBUTION article in WIRING DIAGRAMS. Durango 1. Check circuit breaker for power window system. See TROUBLE SHOOTING . Replace circuit breaker as necessary. If circuit breaker is okay, go to next step. 2. Disconnect negative battery cable. Remove driver’s front power window switch. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. 3. Check for continuity between ground and terminal No. 5 (Black wire) at driver’s power window switch wiring harness connector. If continuity exists, go to next step. If continuity does not exist, repair open in Black wire between driver’s power window switch connector and ground. See WIRING DIAGRAMS . 4. Reconnect negative battery cable. Turn ignition on. Measure voltage between ground and terminal No. 4 (Tan wire) at driver’s power window switch wiring harness connector. If battery voltage is present, check driver’s power window switch. See POWER WINDOW SWITCH under COMPONENT TESTS. If battery voltage is not present, repair open Tan wire between driver power window switch connector and ignition switch. See WIRING DIAGRAMS . See POWER DISTRIBUTION article in WIRING DIAGRAMS. ONE WINDOW INOPERATIVE

Related Content:

1993 dakota 3 9 fuse diagram, lucas a127 wiring, zimmatic pivot wiring, free 1997 buick regal gs wiring diagrams, 1998 Dodge Dakota Service Manual, abs and Anti Theft Passive 2000 mercury cougar, 2003 s10 airbag wiring diagram, dodge durango 2002 suspension layout, 97 jetta fuel pump wiring diagrams, 1996 silverado electrical manual

Hemi Chrysler 300C, Dodge Magnum and Dodge Charger Installation instructions

0

Filed Under (More Manuals) by admin on 06-12-2011

download
Installation instructions: 1. Raise and support vehicle. 2. Lubricate factory rubber hangers with penetrating oil. 3. Remove fasteners attaching driver side tailpipe/resonator assembly to rear of center-mount factory muffler. Remove tailpipe/resonator from factory hangers and from vehicle. 4. Loosen stock clamps attaching stock exhaust to converter pipe outlets near front of vehicle. 5. Remove black factory stiffener cross-brace from bottom of vehicle. 6. With a helper, remove factory hanger rods from rubber hangers and remove remaining exhaust system from vehicle. 7. Place two supplied clamps over inlets of X-pipe and install assembly over outlets of factory converter pipes. The X- pipe should be installed to position the slotted-hole brackets towards the top of the pipes. Do not fully tighten clamps at this time. 8. Using two supplied clamps, install mufflers over outlets of X-pipe assembly. Do not fully tighten clamps at this time. 9. Using two supplied clamps, install left and right tailpipes to outlets of mufflers and insert hanger rods into factory rubber hangers. Do not fully tighten clamps at this time. 10. Install tips with clamps over outlets of tailpipes. 11. Reinstall factory body stiffener brace to bottom of vehicle. 12. Starting at front of vehicle, align system and tighten clamps. You may need to push system upwards while tightening clamps to be sure system adequately clears stiffener brace. 13. Align tips and tighten clamps .

Related Content:

free owners manual for dodge intrepid 2001, 1996 Dodge Intrepid Owners Manual pdf, 1996 dodge ram 1500 owners manual free download, 1999 dodge ram wagon 1500 owner manual, dodge d50 service manual free, 97 caravan repair manual pdf download free, cadillac DTC PO622, Dodge Charger 2 7 Firing Order, 1500 dodge ram wagon 1999 owner manual, install directions for dodge 2500 ac unit

TOYOTA SIENNA SEAT REMOVAL AND INSTALLATION MANUAL

0

Filed Under (Toyota Manuals) by admin on 03-04-2012

download
Front Seat Installation Instructions 1. Roll seat base into position, just behind the floor mounted strikers. Pull up the release handle. 2. Lift the rear of the seat base up (a) and slide it forward (b) to engage the front strikers. 3. Push down on rear of seat to engage rear strikers. Push down the release handle to lock the seat base into place. 4. Connect (plug) seat electrical harness to B-pillar receptacles. See pages 36 and 37 for details. Position seat and pull release handle up. 1 2 3 Lift up (a) and slide forward (b) to engage front strikers. Push down to engage rear strikers. Push down handle to lock into place

Related Content:

01 yukon seat switch diagram, wiki how to fix honda pilot seat buckle, REPAIR WIREING IN 2001 YUKO FRONT SEAT, repair 2007 ody seat back, reinstalling diogram the driver seat in a 2000 jeep wrangler, install seat cover instructions for saab 9-3, how to replace seat covers in a lincoln navigator, free 2003 ford expedition wiring diagrams power seat, fix headrest on honda odyssey moving forward, do i need to reset steering angle on 2011 yukon after wheel alingment