Skip to content

how to remove dash trim 2002 windstar

You search PDF repair manual about how to remove dash trim 2002 windstar, if there are search results will appear below. If search results do not exist, please search by others keyword.

1989-2002 TOYOTA 4-Runner Pickup (standard cab) INSTALLATION INSTRUCTIONS

download
TOYOTA 4-Runner 1990-95 Pickup (standard cab) 1989-2002 / Pickup (extended cab) 1989-2002 Disconnect the negative battery terminal to prevent an accidental short circuit. Remove (3) screws and (1) 10mm bolt from the driver’s side speaker panel and remove the panel. Remove (1) 10mm bolt from the bottom of the passenger’s side speaker panel. Remove (3) screws from the side of the panel and remove the glove box. Remove (4) screws securing the factory head unit and disconnect the wiring. Disconnect the negative battery terminal to prevent an accidental short circuit. Remove the climate control knobs. Unclip the climate control trim panel and remove (2) Phillips screws exposed. Unclip the dash trim bezel, lift up on the bezel and remove. DOUBLE DIN APPLICATIONS: Skip to the Installation Instructions for ALL VEHICLES on Page #3. SINGLE DIN APPLICATIONS: Cut and remove the bottom portion of the Radio Housing (see Fig. A) and Faceplate (see Fig. B). Skip to the Installation Instructions for ALL VEHICLES on Page #3. 12 1 2 TOYOTA Tacoma 1995-02 1 Disconnect the negative battery terminal to prevent an accidental short circuit. Pull the cupholder out. Unclip the radio trim bezel and remove. Remove (4) screws securing the factory head unit and disconnect the wiring.

TOYOTA DASH DISASSEMBLY INSTALLATION INSTRUCTIONS

download
Disconnect the negative battery terminal to prevent an accidental short circuit. 1 Unclip and remove side panel from both sides of radio and climate controls. Figure A) 2 TOYOTARAV 42001-2005 Remove (4) Phillips screws securing the radio/climate control trim panel. (Figure B) 3 Remove (4) 10 MM bolts securing the radio. (Figure C) 4 DASH DISASSEMBLY A B C Continue to kit assembly. Unplug and remove radio. 5 Remove factorybrackets from radio. Retain brackets for use during kit assembly. 6 7 95-8202 DASH DISASSEMBLY TOYOTAMR2 SPIDER 2000-2005 Disconnect the negative battery terminal to prevent an accidental short circuit. Unsnap the lower trim piece from each side of the dash console and remove (2) Phillips screws exposed in each cavity. Remove the upper trim piece from each side of the console. (Figure A) 2 Remove the climate control knobs and (2) Phillips screws exposed. Remove the climate control trim bezel. (Figure A) 3 Remove the ashtray and (1) 10mm bolt exposed. Unclip the ashtray trim bezel and remove. (Figure A) Unclip the radio trim bezel, remove (4) Phillips screws securing the unit and disconnect the wiring. 4 1 5 2 A Continue to kit assembly. 7

2005 TOYOTA TACOMA PICKUP DASH FRONT DOOR PANEL INSTALLATION MANUAL

download
ANTENNA: THE FACTORY ANTENNA IS LOCATED ATOP THE FRONT PASSENGER FENDER. RADIO REMOVAL AND IN-DASH INSTALLATION: NOTE: THE FACTORY RADIO PROVISION IS A DOUBLE DIN OPENING. 1. USING A PICK TOOL, CAREFULLY POP OUT THE A/C CONTROLS. 2. EXTRACT (4) 10MM BOLTS SECURING THE RADIO TO THE DASH, DISCONNECT AND REMOVE. FRONT DOOR SPEAKER INSTALLATION: NOTE: THE FACTORY SPEAKER PROVISION IS FOR A 6 1/2″ SPEAKER MOUNTED IN A FACTORY ADAPTER. 1. REMOVE “A” TRIM PANEL FROM TOP FRONT CORNER OF DOOR PANEL. 2. EXTRACT (1) PHILLIPS HEAD SCREW FROM DOOR HANDLE. 3. REMOVE ARM REST COVER AND EXTRACT (5) PHILLIPS HEAD SCREWS FROM BEHIND. 4. REMOVE (1) PUSH-TAB FASTENER FROM FRONT UPPER DOOR PANEL NEAR MIRROR. 5. USING A PANEL REMOVAL TOOL, CAREFULLY RELEASE PANEL, LIFT AWAY AND REMOVE. 6. EXTRACT (3) 10MM BOLTS SECURING SPEAKER, LIFT AWAY, DISCONNECT AND REMOVE. REAR SPEAKER INSTALLATION: NOTE: 2-DOOR REGULAR CAB HAS NO FACTORY REAR SPEAKER PROVISION. EXTENDED CAB REAR-SIDE DOOR SPEAKER INSTALLATION: 1. REMOVE (1) PHILLIPS HEAD SCREW FROM DOOR HANDLE, THEN REMOVE HANDLE COVER. 2. REMOVE (1) PHILLIPS FROM ARMREST POCKET. 3. REMOVE (1) POP TAB AT THE TOP OF THE DOOR PANEL. 4. REMOVE (1) 15 MM BOLT SECURING SEAT BELT TO BOTTOM OF THE DOOR. 5. USING A PANEL REMOVAL TOOL, CAREFULLY RELEASE PANEL, LIFT AWAY AND REMOVE. 6. EXTRACT (3) 10MM BOLTS SECURING SPEAKER, LIFT AWAY, DISCONNECT AND REMOVE. 4-DOOR CREW-CAB REAR SIDE DOOR SPEAKER INSTALLATION: 1. REMOVE (1) PHILLIPS HEAD SCREW FROM DOOR RELEASE HANDLE. 2. REMOVE (1) PHILLIPS FROM ARMREST POCKET. 3. REMOVE TRIM PANEL ON REAR SIDE OF WINDOW. 4. REMOVE (1) PUSH-TAP FASTENER EXPOSED IN STEP #3 ABOVE. 5. USING A PANEL REMOVAL TOOL, CAREFULLY RELEASE PANEL, LIFT AWAY, UNPLUG CONNECTORS AND REMOVE. 6. EXTRACT (3) 10MM BOLTS SECURING SPEAKER, LIFT AWAY, DISCONNECT AND REMOVE.

2009 2010 Toyota Venza DASH DISASSEMBLY INSTALLATION INSTRUCTIONS

download
Toyota Venza 2009-2010 1 D isconnect the negative battery terminal to prevent an accidental short circuit. 1 Unclip and remove the trim panel to the right of the shifter. ( Figure A) 2 Remove (1) Phillips screw from the bottom of the climate control then unclip and remove the climate control. (Figure B) 3 Remove (4)10 MM bolts securing the radio. Note: You will need a universal swivel head socket adapter to get to the bottom left bolt. (Figure C) 4 Remove (4) Phillips screws securing the factory radio to the a/c vent panel. ( Figure D) 99-8225G KIT ASSEMBLY 2 REAR VIEW-A/C VENT PANEL A B C D Secure the Radio Housing into the factory a/c vent panel using the factory hardware. (Figure A) 1 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure B) 3 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2 Slide the aftermarket head unit into the cage and secure. (Figure C) 4 * Note: Refer also to the instructions included with the aftermarket radio.

2002 Honda Civic DX Sedan Trim Removal/ Installation – Seat Side and Rear Shelf Area

download
Trim Removal/Installation – Seat Side and Rear Shelf Area Special Tools Required KTC trim tool set SOJATP2014 2-door NOTE: * Put on gloves to protect your hands. * Use the appropriate tool from the KTC trim tool set to avoid damage when prying components. * Take care not to bend or scratch the trim and panels. 1. Remove the trim as shown. To remove the side trim panel, remove the rear seat-back and rear seat cushion. 2. Install the parts in the reverse order of removal, and note these items: * Before installing the rear shelf , remove the clips from the body, and install them to the rear shelf. * Replace any damaged clips. * When installing the rear shelf , slip the rear seat belts and center belt through the slits in the rear shelf. * Make sure the high mount brake light connector is plugged in properly. * Apply liquid thread lock to the anchor bolts before installation