Skip to content

toyota starlet 1997 workshop manual

You search PDF repair manual about toyota starlet 1997 workshop manual, if there are search results will appear below. If search results do not exist, please search by others keyword.

TOYOTA STARLET GT TURBO/ GLANZA Specifications

download
Car Toyota Starlet GT Turbo Engine 4E-FTE L4 1331cc EFI DOHC 16valve Aspiration Toyota ct-9 Turbocharger (CT-9A) Output 133hp @ 6400rpm (100kw @6400rpm) Torque 16.0kgm @ 4800rpm (157Nm @ 4800rpm) 0-100 km/h (0- 60 mph) 6.9 Seconds Redline 7200 rpm Boost Settings (Dual-mode Turbo) 0.40bar (@6psi) @ LO setting – 0.65bar (@9.5psi) @ HI setting Dry Weight 830 kg Transmission/ Axle C52 -522 LSD C52 -523 Compression Ratio 8.2:1 Bore & Stroke 74 x 77.4 Injectors 4 x 295cc/min Turbo Model CT-9 Factory Boost 0.40bar(5psi)Lo – 0.65bar(9psi)Hi All text/images including any related copyrights in this document belong to their respective owner. Generated with 2PDFFromps ( http://s0nic.net ), free pdf creator. 3.0 Service/Maintenance Guide Engine Oil Castrol Formula R Synthetic 10W-60 : 5000km intervals Oil Filter TRD (Toyota Race Development) Sports oil filter : 5000km intervals – Product code # 90915-SP000 Transmission Fluid/ Oil Castrol Syntax 75W/90 Synthetic Manual transmission fluid : 10000km intervals Brake and Clutch Fluid Castrol Super Disc DOT 5.1 Brake fluid : 2000km / annual intervals Fuel Filter OEM (Toyota) standard replacement part # 23300- 19245 : 10000km intervals Air Filter Element OEM Toyota (# 17801 – 11050) : Replace with K&N OEM re-usable Replacement product # 33-2634 (if you dont want pod modification) : at 20000km intervals – K&N re-usable pod filter (filter charge option) Product # FC-0183 Clean ever 20000km with K&N cleaning kit product # 99-5000 Turbocharger Oil Feed Pipe Clean out at 10000km intervals Engine Coolant (Radiator) Castrol Engine Coolant : Replace at 10000km intervals Spark Plugs and Leads NGK “BKR-6EP” Laser Platinum plugs – Magnecor 48326 8mm Leads : Check / replace plugs at 10000km intervals

1984 Toyota Pickup ELECTRICAL Toyota Ignition System – Nippondenso Electronic Ignition Repiar Manual

download
High Tension Wire Resistance 1. Set ohmmeter to x 1000 range and attach leads to each end of high tension wire. On Isuzu I’Mark and P’UP, resistance should not exceed 73,500 ohms per foot. 2. On all other models, resistance should not exceed 25,000 ohms per wire. If it does, replace wires. Fig. 5: Checking Pick-Up Coil Resistance Connect ohmmeter leads to distributor connector terminals. Pick-Up Coil Resistance Set ohmmeter to x 100 range, measure pick-up coil resistance at distributor connector. See Fig. 5 and PICK-UP COIL (SIGNAL GENERATOR) RESISTANCE table. Also check wires for shorts or opens. PICK-UP COIL (SIGNAL GENERATOR) RESISTANCE (OHMS) NOTE: On Toyota Celica, Starlet, 4Runner and Pickup models, a signal generator is used in place of a pick-up coil. Application

2000-2002 Toyota Corolla, Celica, MR2 Spyder, and ECHO DTC P1349 – VVTi ACTUATOR Repair Manual

download
TC P1349 – VVTi ACTUATOR – EG009-03 May 19, 2003 Page 3 of 4 1. Inspect the condition of the valve cover oil baffle as per TSB EG007-02. If camshaft or camshaft position sensor damage resulting from a bent baffle is identified, repair the damage as necessary. 2. Make sure the vehicle is in “PARK” with the engine idling. 3. Referring to the screen flow below, connect the Toyota Diagnostic Tester to the vehicle and select the VVT Control Bank One Active Test (VVT CTRL B1) from the Active Test Menu. 1: DATA LIST 2: DTC INFO 3: 4: SNAPSHOT 5: SYSTEM CHECK 6: RESET MEMORY 7: MONITOR INFO 8: CHECK MODE SELECT DATA B DIAGNOSTIC MENU ENGINE A C INJ VOL A/F CONTROL CAN CTRL VSV TANK BYPASS VSV EVAP VSV (ALONE) A/C MAG CLUTCH FUEL PUMP/SPD LINE PRESS UP VVT CTRL B1 Confirm that the Vehicle is Stopped And Engine Idling 3: ACTIVE TEST PRESS [ENTER] INJECTOR 3.5ms IGN ADVANCE 11.0deg CALC LOAD 22% MAF 3.68gm/s ENGINE SPD 684rpm COOLANT TEMP186.8F INTAKE AIR 129.2F THROTTLE POS 14% CTP SW ON VEHICLE SPEED0MPH O2S B1S2 0.82V AFS B1 S1 3.25V SHORT FT #1 1.5% LONG FT #1 5.4% TOTAL FT #1 1.08 E D VVT CTRL B1 OFF INJECTOR 8.3ms IGN ADVANCE 5.0deg CALC LOAD 0% MAF 0.00gm/s ENGINE SPD 0rpm COOLANT TEMP186.8F INTAKE AIR 129.2F THROTTLE POS 14% CTP SW ON VEHICLE SPEED0MPH O2S B1S2 0.33V AFS B1 S1 3.29V SHORT FT #1 -0.1% LONG FT #1 5.4% TOTAL FT #1 1.08 VVT CTRL B1 ON 4. Using the right arrow key, toggle the VVTi actuator “ON.” 5. If at this point the vehicle does not run rough and/or stalls when the active test is performed, proceed with Repair Manual P1349 VVTi Fault Isolation Procedure (FIP). If the vehicle does stall and/or runs rough, this indicates the the VVTi control system is operating. Proceed to replace the VVTi actuator following the repair procedures listed on the Technical Information System (TIS): Engine Mechanical Section, Camshaft, Replacement The camshaft timing gear should come in the unlocked position from the factory. If it is difficult to install the camshaft timing gear, the lock pin may be engaged. To disengage the lock pin, apply and hold approximately 20 psi of air pressure at the oil feed hole located 90 degrees clockwise of the oval slot. (See Figure 1.) Once the pin has released, turn the interior assembly counterclockwise. (See black arrow in Figure 1.) B. Put the camshaft timing gear assembly and the camshaft together with the straight pin off the key groove. C. Turn the camshaft timing gear assembly (as shown in Figure 2) while pushing it lightly against the camshaft. Push further at the position where the pin fits into the groove. NOTE: Be sure not to turn the camshaft timing gear to the retard angle side (in the clockwise direction). D. Check that there is no clearance between the end of the camshaft and the camshaft timing gear. E. Tighten the camshaft bolt with the camshaft timing gear fixed. Torque: 54 Nm (551 kgfcm, 40 ftlbf) F. Check that the camshaft timing gear assembly can move to either side and is not locked

TOYOTA 4RUNNER A750E (F) AUTOMATIC TRANSMISSION SERVICE MANUAL

download
The ATF level gauge (dip-stick) has been discontinued, and the ATF inspection method and the oil level inspection method have been changed. This mechanism consists of a refill plug, overflow plug, ATF temperature sensor No.2, and A/T OIL TEMP temperature warning light. ATF Filling procedures using SST (09843-18020): When a large amount of ATF needs to be filled (i.e. after removal and installation of oil pan or torque converter), perform the procedure from step 1. When the small amount of ATF is required (i.e. removal and installation of the oil cooler tube, repair of oil leak), perform the procedure from step 7. 1) Raise the vehicle keeping it level. 2) Remove the refill plug and overflow plug. 3) Fill ATF from the refill plug until it overflows from the overflow plug. 4) Install the overflow plug. 5) Fill the specified amount of ATF determined by procedure and install the refill plug. Example 6) Lower the vehicle down. 7) Use the SST (09843-18020) to short the terminals Tc and CG of the DLC3 connector: 8) Start the engine and allow it to idle. A/C switch must be turned OFF. 9) Move the shift lever slowly through each of the positions from the P to the L position, and move it back to the P position. 10) Move the shift lever from the D position, and quickly move then back and forth between N and D (once per less than 1.5 seconds) for at least 6 seconds. This will activate the oil temperature detection mode. Standard: The A/T OIL TEMP warning light remains illuminated for 2 seconds and it goes off. 11) Return the shift lever to the P position and disconnect the terminal Tc. 12) Idle the engine to raise the oil temperature. 13) Immediately after the ATF OIL TEMP warning light turns on, lift the vehicle up. The A/T OIL TEMP warning light will indicate the ATF temperature according to the following table. (Insert table here) 14) Remove the overflow plug and adjust oil quantity. If the ATF overflows, go to step 17, and if the ATF does not overflow, go to step 15. 15) Remove the refill plug. 16) Fill ATF to the refill plug until it flows out from the overflow plug. 17) When the ATF flow slows to a trickle, install the overflow plug. 18) Install the refill plug (only if the refill plug has been removed). 19) Lower the vehicle down. 20) Turn the ignition switch OFF to stop the engine. For details about the ATF Filling procedures, see the 2004 4Runner Repair Manual (Pub. No. RM1059U)

1992 Toyota Truck Pickup 2WD Cooling and Exhaust Engine Ignition Timing Adjustments Manual

download
1. Connect a tachometer test probe to terminal IG of the check connector, Fig. 211 2. NOTE: Never let the tachometer lead touch ground as this could cause damage to the igniter and/or coil. Be sure to check that your tachometer is compatible with this ignition system. Consult the operating manual for your instrument. Service Check Connector 3. Fig. 223 Ignition Timing (10) Check idle speed . 4. Idle Speed : 800 rpm Using a timing light, verify that the timing mark on the timing cover is aligned with the mark on the crankshaft pulley, Fig. 223 5. Ignition Timing: 10°BTDC at idle Tighten the distributor bolt and recheck the ignition timing. 6. Remove service wire. 7. Check idle advance timing with service wire removed. 8. Ignition Timing: 8°BTDC at idle Check idle speed and adjust if necessary, COMPUTERIZED ENGINE CONTROLS. 9. Disconnect tachometer and timing light from engine. 10. Timing Belt Removal Notes Fan Shroud Removal & Installation Remove radiator fan upper and lower shrouds. 1. Installing Power Steering Pump And Belt Remove power steering pump drive belt and pump. 2. Disconnect No. 2 and No. 3 air hoses from air pipe. 3. 4. Fan Removal Remove alternator drive belt , cooling fan, belt guide and fan pulley. 5. Remove No. 2 timing belt cover. 6. Fig. 6 Aligning Timing Marks Place No. 1 cylinder at TDC of compression stroke by turning the crankshaft pulley and aligning pulley groove with the “0” mark on the No. 1 timing belt cover. Ensure alignment marks on the camshaft timing sprockets and the No. 3 timing belt cover are correctly aligned, Fig. 6. 7. If not, turn the crankshaft pulley one complete revolution. 8. Crankshaft Pulley Removal