Komatsu FG10 14 15 18-18, FG09L 10L 14L 15L 18L-18, FG15H 18H-18, FG10 14 15 18-18, FG10L 14L 15L 18L-18 Shop Manual BEA20C1-01
Komatsu FG10 14 15 18-18, FG09L 10L 14L 15L 18L-18, FG15H 18H-18, FG10 14 15 18-18, FG10L 14L 15L 18L-18 Shop Manual BEA20C1-01 - Image 2
Komatsu FG10 14 15 18-18, FG09L 10L 14L 15L 18L-18, FG15H 18H-18, FG10 14 15 18-18, FG10L 14L 15L 18L-18 Shop Manual BEA20C1-01 - Image 3
Komatsu FG10 14 15 18-18, FG09L 10L 14L 15L 18L-18, FG15H 18H-18, FG10 14 15 18-18, FG10L 14L 15L 18L-18 Shop Manual BEA20C1-01 - Image 4
Komatsu FG10 14 15 18-18, FG09L 10L 14L 15L 18L-18, FG15H 18H-18, FG10 14 15 18-18, FG10L 14L 15L 18L-18 Shop Manual BEA20C1-01 - Image 5

Komatsu FG10 14 15 18-18, FG09L 10L 14L 15L 18L-18, FG15H 18H-18, FG10 14 15 18-18, FG10L 14L 15L 18L-18 Shop Manual BEA20C1-01

$50.00

  • Type Of Manual: Shop Manual
  • Manual ID: BEA20C1-01
  • Format: PDF
  • Size: 41.9MB
  • Number of Pages: 459
Category:

Description

  • Model List:

    • FG10/14/15/18-18
    • FG09L/10L/14L/15L/18L-18
    • FG15H/18H-18
    • FG10/14/15/18-18
    • FG10L/14L/15L/18L-18
  • 1. SAFETY
  • 1.1. SAFETY MANAGEMENT
  • 1.2. SAFE TRAVEL
  • 1.3. LOADING OPERATIONS
  • 1.4. SAFETY IN PERIODIC MAINTENANCE
  • 1.5. TOWING
  • 1.6. STRUCTURE AND STABILITY OF THE LIFT TRUCK
  • 1.7. TRUCK DATA PNEUMATIC TIRE LIFT TRUCKS (OUTDOOR)
  • 1.8. TRUCK DATA CUSHION TIRE LIFT TRUCKS (INDOOR)
  • 1.9. AX50 SERVICE DATA ALL MODELS
  • 1.10. WEIGHT TABLE
  • 1.11. SPECIFICATIONS
  • 1.12. PERIODIC REPLACEMENT OF CONSUMABLE PARTS
  • 1.13. STANDARD TIGHTENING TORQUE FOR BOLTS
  • 1.14. STANDARD TIGHTENING TORQUE FOR PIPE JOINTS
  • 1.14.1. ELBOWS, NIPPLES AND UNIONS
  • 1.14.2. HIGHPRESSURE RUBBER HOSES, PIPES AND SLEEVE NUTS
  • 1.15. LUBRICANT AND FUEL CAPACITIES
  • 2. SPECIFICATIONS AND GENERAL INFORMATION
  • 3. OPERATOR COMPARTMENT
  • 3.1. STRUCTURE AND FUNCTION
  • 3.1.1. VEHICLE CONTROLLER
  • 3.1.2. Komatsu Operator Present System (KOPS)
  • 3.1.3. CONTROLLER TROUBLESHOOTING
  • 3.2. PERIODIC INSPECTION AND MAINTENANCE
  • 3.3. TESTING AND ADJUSTING
  • 3.3.1. ADJUST STOP LAMP SWITCH
  • 3.3.2. ADJUST ACCELERATOR PEDAL
  • 3.3.3. ADJUST PARKING BRAKE LEVER
  • 3.3.4. COMBINATION SWITCH
  • 3.4. REMOVAL AND INSTALLATION
  • 3.4.1. PARKING BRAKE CABLE
  • 3.5. DISASSEMBLY AND ASSEMBLY
  • 3.6. MAINTENANCE STANDARD
  • 4. ENGINE
  • 4.1. STRUCTURE AND FUNCTION
  • 4.2. PERIODIC INSPECTION AND MAINTENANCE
  • 4.2.1. Lubricants chart
  • 4.2.2. maintenance intervals
  • 4.2.3. inspection standards
  • 4.2.4. CHECK COOLANT LEVEL
  • 4.2.5. CHECK OIL LEVEL IN ENGINE OIL PAN
  • 4.2.6. CHANGe ENGINE OIL
  • 4.2.7. REPLACe ENGINE OIL FILTER
  • 4.2.8. INSPECT THE SPARK PLUGS
  • 4.2.9. DRAIN WATER FROM FUEL FILTER
  • 4.2.10. REPLACe FUEL FILTER
  • 4.2.11. REPLACE RADIAL SEAL AIR FILTER
  • 4.2.12. CLEAN RADIATOR
  • 4.3. TESTING AND ADJUSTING
  • 4.3.1. ADJUST IGNITION TIMING
  • 4.3.2. MEASURE COMPRESSION PRESSURE
  • 4.3.3. ADJUSTMENT OF VALVE CLEARANCE
  • 4.4. REMOVAL AND INSTALLATION
  • 4.4.1. REMOVAL
  • 4.4.2. INSTALLATION
  • 4.5. DISASSEMBLY AND ASSEMBLY
  • 4.6. mAINTENANCE STANDARD
  • 5. TORQUE CONVERTER
  • 5.1. Structure and function
  • 5.1.1. TORQUE CONVERTER
  • 5.1.2. GEAR PUMP
  • 5.1.3. TORQUE CONVERTER ASSEMBLY
  • 5.2. Periodic Inspection
  • 5.2.1. TROUBLESHOOTING
  • 5.3. testing and Adjusting
  • 5.4. Removal and Installation
  • 5.5. Disassembly and Assembly
  • 5.5.1. DISASSEMBLY
  • 5.5.2. ASSEMBLY
  • 5.6. Maintenance Standard
  • 6. TORQFLOW TRANSMISSION
  • 6.1. Structure and function
  • 6.2. Periodic Inspection AND MAINTENANCE
  • 6.2.1. inspection standards
  • 6.2.2. Check OIL LEVEL
  • 6.2.3. REPLACe OIL, INSPECT AND CLEAN STRAINER
  • 6.2.4. REPLACe LINE FILTER
  • 6.3. testing and Adjusting
  • 6.4. Removal and Installation
  • 6.4.1. REMOVAL
  • 6.4.2. INSTALLATION
  • 6.5. Disassembly and Assembly
  • 6.5.1. DISASSEMBLY
  • 6.5.2. ASSEMBLY
  • 6.6. Maintenance Standard
  • 6.6.1. TORQFLOW TRANSMISSION
  • 6.6.2. TRANSMISSION CONTROL VALVE
  • 7. DRIVE AXEL
  • 7.1. Structure and function
  • 7.2. Periodic Inspection AND MAINTENANCE
  • 7.3. testing and Adjusting
  • 7.3.1. CHECK OIL LEVEL
  • 7.3.2. REPLACE OIL
  • 7.4. Removal and Installation
  • 7.4.1. Removal
  • 7.4.2. Installation
  • 7.5. Disassembly and Assembly
  • 7.5.1. ADJUST PINION SHAFT ASSEMBLY WITH SHIM(S)
  • 7.5.2. ADJUST PINION GEAR CLEARANCE
  • 7.5.3. INSPECT PINION BEARING CLEARANCE
  • 7.5.4. ADJUST DIFFERENTIAL
  • 7.6. Maintenance Standard
  • 8. STEERING SYSTEM
  • 8.1. Structure and function
  • 8.1.1. STEERING VALVE
  • 8.2. STEERING AXLE
  • 8.3. Periodic Inspection AND MAINTENANCE
  • 8.4. testing and Adjusting
  • 8.4.1. steering valve TROUBLESHOOTING CHART
  • 8.5. Removal and Installation
  • 8.5.1. steering valve
  • 8.5.2. Power Steering cylinder
  • 8.5.3. Steering axle
  • 8.6. Disassembly and Assembly
  • 8.6.1. Steering valve
  • 8.6.2. POWER STEERING CYLINDER
  • 8.6.3. STEERING AXEL
  • 8.7. Maintenance Standard
  • 8.7.1. Power steering valve
  • 8.7.2. STEERING AXLE
  • 9. WHEEL BRAKE
  • 9.1. STRUCTURE AND FUNCTION
  • 9.1.1. wheel brake
  • 9.1.2. BRAKE MASTER CYLINDER
  • 9.2. PERIODIC INSPECTION AND MAINTENANCE
  • 9.2.1. inspection standards
  • 9.2.2. BLEEDING BRAKE PIPING
  • 9.2.3. ADJUST INCHING AND BRAKE PEDAL
  • 9.3. REMOVAL AND INSTALLATION
  • 9.3.1. REMOVAL
  • 9.3.2. INSTALLATION
  • 9.4. DISASSEMBLY AND ASSEMBLY
  • 9.4.1. WHEEL BRAKE
  • 9.4.2. BRAKE MASTER CYLINDER
  • 9.5. mAINTENANCE STANDARD
  • 9.5.1. WHEEL brake components
  • 9.5.2. BRAKE MASTER CYLINDER
  • 10. HYDRAULIC SYSTEM
  • 10.1. Structure and function
  • 10.2. Periodic Inspection AND MAINTENANCE
  • 10.2.1. Service HYDRAULIC TANK
  • 10.3. Removal and Installation
  • 10.3.1. Remove hydraulic pump
  • 10.3.2. Install hydraulic pump
  • 10.4. Disassembly and Assembly
  • 10.4.1. HYDRAULIC PUMP
  • 10.4.2. CONTROL VALVE
  • 10.4.3. Replace control valve Lip Seals
  • 10.4.4. replace control valve Spool Seals
  • 10.5. Maintenance Standard
  • 11. WORK EQUIPMENT
  • 11.1. Structure and function
  • 11.1.1. TILT CYLINDER
  • 11.2. Periodic Inspection AND MAINTENANCE
  • 11.3. MEASURE HYDRAULIC DRIFT OF LIFT AND TILT CYLINDERS
  • 11.4. Removal and Installation
  • 11.4.1. MAST
  • 11.4.2. LIFT CYLINDER
  • 11.5. Disassembly and Assembly
  • 11.5.1. LIFT CYLINDER
  • 11.5.2. TILT CYLINDER
  • 11.5.3. Cylinder Seal Service Kits
  • 11.5.4. sideshifter
  • 11.6. Maintenance Standard
  • 11.6.1. MAST, FORK CARRIAGE AND FORK
  • 12. ES30/ES40 MS LIMITED FREE LIFT 2STAGE MAST
  • 12.1. Introduction
  • 12.2. Installation
  • 12.3. Periodic maintenance
  • 12.4. Troubleshooting
  • 12.5. Service
  • 13. ES30/ES40, E40/E50/ E60/E65, EV40/EV50/ EV60 FULL FREE LIFT 3STAGE MAST
  • 13.1. Introduction
  • 13.2. Installation
  • 13.3. Periodic Maintenance
  • 13.4. Troubleshooting
  • 13.5. Service
  • 14. MQ Quad Mast
  • 14.1. iNTRODUCTION
  • 14.2. INSTLATION
  • 14.3. PERIODIC MAINTENANCE
  • 14.4. TROUBLESHOOTING
  • 14.5. SERVICE
  • 15. CONVERSION TABLES
  • 15.1. Millimeters to Inches
  • 15.2. Inches to Millimeters
  • 15.3. Cubic meters to Cubic yards
  • 15.4. Cubic yards to Cubic meters
  • 15.5. Liter to U.S. Gallon
  • 15.6. Gallon to Liter
  • 15.7. Liter to U.K. Gallon
  • 15.8. Gallon to Liter
  • 15.9. Kilogram to Pound
  • 15.10. Pound to Kilogram
  • 15.11. Kg/cm2 to lb/in2
  • 15.12. Kgm to ft. lb
  • 15.13. Temperature (Fahrenheit/Centigrade)
Rate this product

Reviews

There are no reviews yet.

Be the first to review “Komatsu FG10 14 15 18-18, FG09L 10L 14L 15L 18L-18, FG15H 18H-18, FG10 14 15 18-18, FG10L 14L 15L 18L-18 Shop Manual BEA20C1-01”

Your email address will not be published. Required fields are marked *

Related products