Linde 1193-01 – P20 Operating Instructions

Description

• Model List:
  • P20

• 1. Leadacid battery charger 24V
• 2. Leadacid battery charger 24V . 48V . 80V
• 3. Tow tractorP06,P10,P20,W04
• 3.1. Table of content
• 3.2. Introduction
• 3.2.1. Introduction
• 3.2.2. General information
• 3.2.3. Conformity marking
• 3.2.4. Impermissible use
• 3.2.5. Symbols used
• 3.2.6. Description of use and climatic conditions
• 3.2.7. EMC Electromagnetic compatibility
• 3.2.8. Specific use of equipment
• 3.2.9. Technical description
• 3.3. Safety
• 3.3.1. Residual risks
• 3.3.2. Stability
• 3.3.3. Handling consumables
• 3.3.4. Safety regulations
• 3.3.5. Drivers
• 3.3.6. Regulations
• 3.3.7. Competent person
• 3.4. Views
• 3.4.1. Labels
• 3.4.2. Nameplate
• 3.4.3. General view 1193
• 3.4.4. Operating devices 1193
• 3.4.5. Accessory bar (optional)
• 3.4.6. Display unit
• 3.4.7. Electronic key (option)
• 3.4.8. LFM Connect option
• 3.5. Operation
• 3.5.1. Commissioning
• 3.5.2. Checks before initial use
• 3.5.3. Daily checks before use
• 3.5.4. Checking the working environment
• 3.5.5. Operating instructions
• 3.5.6. Starting up
• 3.5.7. Emergency off switch
• 3.5.8. Determining the drive direction
• 3.5.9. Forward.reverse travel
• 3.5.10. Steering unit
• 3.5.11. Standon.seated driving operation
• 3.5.12. Driving on a slope
• 3.5.13. Brake, horn and lighting
• 3.5.14. Coupling
• 3.5.15. Coupling the trailer
• 3.5.16. Driving when transporting loads
• 3.5.17. Transporting the truck
• 3.5.18. Truck storage
• 3.5.18.1. Measures to be carried out before storing a forklift truck
• 3.5.18.2. Putting the tow tractor back into service
• 3.5.19. Disposal of old trucks
• 3.5.20. Operating the LFM Connect option
• 3.5.20.1. Description of the LFM Connect option
• 3.5.20.2. Commissioning a truck equipped with the LFM Connect option
• 3.5.20.3. LFM Connect option Colour code for the LEDs
• 3.5.20.4. Shutting off a truck equipped with the LFM Connect option
• 3.6. Maintenance
• 3.6.1. Maintenance
• 3.6.2. Technical inspection and maintenance characteristics
• 3.6.3. Recommended lubricants
• 3.6.4. Daily checks before starting work
• 3.6.4.1. Checking the travel direction control function
• 3.6.4.2. Checking the brakes
• 3.6.4.3. Testing the steering unit
• 3.6.4.4. Testing safety devices
• 3.6.4.5. Checking the battery charging status
• 3.6.4.6. Opening the battery hood
• 3.6.4.7. Plugging in.unplugging the battery connector
• 3.6.4.8. Checking the condition of cables, terminals and battery connector
• 3.6.5. Maintenance plan as required
• 3.6.5.1. Cleaning
• 3.6.5.2. Accessing the electrical compartment
• 3.6.5.3. Checking the auxiliary seat condition
• 3.6.5.4. Steering tillercheck condition
• 3.6.5.5. Check fuses
• 3.6.6. Inspection and maintenance overview
• 3.6.6.1. hour service plan
• 3.6.6.2. hour service plan
• 3.6.7. Traction motor
• 3.6.7.1. Traction motorCleaning the motor housing
• 3.6.8. Gearbox
• 3.6.8.1. Servicing the reducer
• 3.6.9. Steering.braking.wheels
• 3.6.9.1. Steering unit.wheels.brake system
• 3.6.9.2. Checking the brake air gap
• 3.6.10. Battery
• 3.6.10.1. Checking the onboard charger
• 3.6.10.2. Battery maintenance
• 3.6.10.3. Removing.replacing the battery
• 3.7. Datasheet
• 3.7.1. Technical datasheet
• 3.7.2. Ecodesign requirements for electric motors and variable speed drives