New Holland T5.90, T5.100, T5.110, T5.120 Tractor Operation and Maintenance Manual 51640945

New Holland T5.90, T5.100, T5.110, T5.120 Tractor Operation and Maintenance Manual 51640945 - Image 2

New Holland T5.90, T5.100, T5.110, T5.120 Tractor Operation and Maintenance Manual 51640945 - Image 3

New Holland T5.90, T5.100, T5.110, T5.120 Tractor Operation and Maintenance Manual 51640945 - Image 4

New Holland T5.90, T5.100, T5.110, T5.120 Tractor Operation and Maintenance Manual 51640945 - Image 5

new holland t590 t5100 t5110 t5120 tractor operation and maintenance manual 51640945 2

new holland t590 t5100 t5110 t5120 tractor operation and maintenance manual 51640945 3

New Holland T5.90, T5.100, T5.110, T5.120 Tractor Operation and Maintenance Manual 51640945

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: 51640945
Format: PDF
Size: 30.7MB
Number of Pages: 386
Serial Number:
51640945

Category: New Holland Operator Manual PDF

Model List:
- T5.90 Tractor
- T5.100 Tractor
- T5.110 Tractor
- T5.120 Tractor

1. GENERAL INFORMATION
1.1. Note to the Owner
1.2. Intended use
1.3. ElectroMagnetic Compatibility (EMC)
1.4. Manual scope and required training level
1.5. Metric and imperial units abbreviations
1.6. Identification plates
1.7. Approval data plate
1.8. Operators manual storage
1.9. Machine orientation
1.10. Health and safety related standards applied to your tractor
1.11. Selective catalytic reduction (SCR) system
2. SAFETY INFORMATION
2.1. Safety rules and signal word definitions
2.2. Safety rules General information
2.3. Safety rules Maintenance
2.4. Safety rules Wheels and tires
2.5. Safety rules Explosions and fires
2.6. Safety rules Fire extinguisher
2.7. Safety rules Battery
2.8. Safety rules Instructor seat
2.9. Safety rules Passenger seat
2.10. Safety rules Operator presence system
2.11. Safety rules Power TakeOff (PTO)
2.12. Safety rules Reflectors and warning lights
2.13. Safety rules Seat belts
2.14. Safety rules Operator protective structure
2.15. Safety rules HVAC system
2.16. Safety rules Personal Protective Equipment (PPE)
2.17. Safety rules Do not use sign
2.18. Safety rules Hazardous chemicals
2.19. Safety rules Near utilities
2.20. Safety rules In the event of electrical storms
2.21. Safety rules Mounting and dismounting the machine
2.22. Safety rules Lifting and overhead loads
2.23. Safety rules Front end loader
2.24. Ecology and the environment
2.25. Airborne noise emission
2.26. Vibration levels
2.27. Towing the tractor for recovery
2.28. Tractor jacking points
2.29. Burn prevention
2.30. Emergency escape from cab
2.31. Wheel chocks
2.32. Safety signs
3. CONTROLS AND INSTRUMENTS
3.1. Access to operators platform
3.2. Operators seat
3.3. Instructional seat
3.4. Forward controls
3.5. Lefthand side controls
3.6. Righthand side controls
3.7. Display
3.8. Warning and advisory symbols
4. OPERATING INSTRUCTIONS
4.1. Commissioning the unit
4.2. Starting the unit
4.3. Stopping the unit
4.4. Moving the unit
5. TRANSPORT OPERATIONS
5.1. Road transport
5.2. Recovery transport
6. WORKING OPERATIONS
6.1. General information
6.2. Drive
6.3. Rear remote control valves
6.4. Rear Power TakeOff (PTO)
6.5. Rear hydraulic lift
6.6. Rear threepoint hitch
6.7. Towbar
6.8. Towing hook
6.9. Tires and wheels
6.10. Tread and fender settings
6.11. General information
6.12. Maintenance planning
6.13. As required
6.14. At warning message display
6.15. Every 10 hours or daily
6.16. After the first 50 hours of operation
6.17. Every 50 hours
6.18. Every 100 hours
6.19. Every 300 hours
6.20. Every 600 hours
6.21. Every 1200 hours or annually
6.22. Every 1200 hours or two years
6.23. Every two years
6.24. Every 3600 hours or four years
6.25. Electrical system
6.26. Fuse and relay locations
6.27. Storage
6.28. CALIBRATION
7. TROUBLESHOOTING
7.1. Fault code resolution
7.2. Symptom(s)
8. SPECIFICATIONS
8.1. General dimensions
8.2. Maximum permitted loads on front and rear axle
8.3. Maximum permitted loads on towing hitch
8.4. Speed table for 20 x 20 gearbox
8.5. Speed table for 24 x 24 gearbox
8.6. Speed table for 24 x 24 gearbox
8.7. Speed table for 40 x 40 gearbox
8.8. Speed table for 40 x 40 gearbox
8.9. Additional equipment attachment points
8.10. Consumables
8.11. Capacities
8.12. General specification
9. ACCESSORIES
9.1. Radio
9.2. Single piece ballast
9.3. Coolant immersion heater (where fitted)
9.4. Frontend loader fixation points

Rate this product