New Holland T5.90, T5.100, T5.110, T5.120 Tractor Operation and Maintenance Manual 51640945

Description

• Model List:
  • T5.90 Tractor
  • T5.100 Tractor
  • T5.110 Tractor
  • T5.120 Tractor

• 1. GENERAL INFORMATION
• 1.1. Note to the Owner
• 1.2. Intended use
• 1.3. ElectroMagnetic Compatibility (EMC)
• 1.4. Manual scope and required training level
• 1.5. Metric and imperial units abbreviations
• 1.6. Identification plates
• 1.7. Approval data plate
• 1.8. Operators manual storage
• 1.9. Machine orientation
• 1.10. Health and safety related standards applied to your tractor
• 1.11. Selective catalytic reduction (SCR) system
• 2. SAFETY INFORMATION
• 2.1. Safety rules and signal word definitions
• 2.2. Safety rules General information
• 2.3. Safety rules Maintenance
• 2.4. Safety rules Wheels and tires
• 2.5. Safety rules Explosions and fires
• 2.6. Safety rules Fire extinguisher
• 2.7. Safety rules Battery
• 2.8. Safety rules Instructor seat
• 2.9. Safety rules Passenger seat
• 2.10. Safety rules Operator presence system
• 2.11. Safety rules Power TakeOff (PTO)
• 2.12. Safety rules Reflectors and warning lights
• 2.13. Safety rules Seat belts
• 2.14. Safety rules Operator protective structure
• 2.15. Safety rules HVAC system
• 2.16. Safety rules Personal Protective Equipment (PPE)
• 2.17. Safety rules Do not use sign
• 2.18. Safety rules Hazardous chemicals
• 2.19. Safety rules Near utilities
• 2.20. Safety rules In the event of electrical storms
• 2.21. Safety rules Mounting and dismounting the machine
• 2.22. Safety rules Lifting and overhead loads
• 2.23. Safety rules Front end loader
• 2.24. Ecology and the environment
• 2.25. Airborne noise emission
• 2.26. Vibration levels
• 2.27. Towing the tractor for recovery
• 2.28. Tractor jacking points
• 2.29. Burn prevention
• 2.30. Emergency escape from cab
• 2.31. Wheel chocks
• 2.32. Safety signs
• 3. CONTROLS AND INSTRUMENTS
• 3.1. Access to operators platform
• 3.2. Operators seat
• 3.3. Instructional seat
• 3.4. Forward controls
• 3.5. Lefthand side controls
• 3.6. Righthand side controls
• 3.7. Display
• 3.8. Warning and advisory symbols
• 4. OPERATING INSTRUCTIONS
• 4.1. Commissioning the unit
• 4.2. Starting the unit
• 4.3. Stopping the unit
• 4.4. Moving the unit
• 5. TRANSPORT OPERATIONS
• 5.1. Road transport
• 5.2. Recovery transport
• 6. WORKING OPERATIONS
• 6.1. General information
• 6.2. Drive
• 6.3. Rear remote control valves
• 6.4. Rear Power TakeOff (PTO)
• 6.5. Rear hydraulic lift
• 6.6. Rear threepoint hitch
• 6.7. Towbar
• 6.8. Towing hook
• 6.9. Tires and wheels
• 6.10. Tread and fender settings
• 6.11. General information
• 6.12. Maintenance planning
• 6.13. As required
• 6.14. At warning message display
• 6.15. Every 10 hours or daily
• 6.16. After the first 50 hours of operation
• 6.17. Every 50 hours
• 6.18. Every 100 hours
• 6.19. Every 300 hours
• 6.20. Every 600 hours
• 6.21. Every 1200 hours or annually
• 6.22. Every 1200 hours or two years
• 6.23. Every two years
• 6.24. Every 3600 hours or four years
• 6.25. Electrical system
• 6.26. Fuse and relay locations
• 6.27. Storage
• 6.28. CALIBRATION
• 7. TROUBLESHOOTING
• 7.1. Fault code resolution
• 7.2. Symptom(s)
• 8. SPECIFICATIONS
• 8.1. General dimensions
• 8.2. Maximum permitted loads on front and rear axle
• 8.3. Maximum permitted loads on towing hitch
• 8.4. Speed table for 20 x 20 gearbox
• 8.5. Speed table for 24 x 24 gearbox
• 8.6. Speed table for 24 x 24 gearbox
• 8.7. Speed table for 40 x 40 gearbox
• 8.8. Speed table for 40 x 40 gearbox
• 8.9. Additional equipment attachment points
• 8.10. Consumables
• 8.11. Capacities
• 8.12. General specification
• 9. ACCESSORIES
• 9.1. Radio
• 9.2. Single piece ballast
• 9.3. Coolant immersion heater (where fitted)
• 9.4. Frontend loader fixation points