Description
-
Model List:
- HD325-7 Dump Truck
- HD405-7 Dump Truck
- 1. COVER
- 2. CONTENTS
- 3. Outline of division (Only main components)
- 4. Dimensions of main components
- 5. Rough schedule of assembly and welding
- 6. List of equipments, tools, and consumables
- 7. Assembly process No.
- 7.1. Oil, grease, and coolant
- 7.2. Levels of oil, grease, and coolant
- 7.3. Slinging bare machine
- 7.4. Positioning bare machine
- 7.5. Assembly of tire and wheel assembly
- 7.6. Installing tire and wheel assembly
- 7.7. Installing rear tire valve extension
- 7.8. Installing rear monitor
- 7.9. Installing L.H platform
- 7.10. Installing L.H handrail
- 7.11. Installation of left handrail (Diagonal ladder specification)
- 7.12. Installation of diagonal ladder (Diagonal ladder specification)
- 7.13. Installation of diagonal ladder 1 (Diagonal ladder specification)
- 7.14. Installation of diagonal ladder 2 (Diagonal ladder specification)
- 7.15. Installation of diagonal ladder 3 (Diagonal ladder specification)
- 7.16. Installing radio antenna and fixing its cable
- 7.17. Installing side view mirrors
- 7.18. Installing under view mirrors (For general overseas countries)
- 7.19. Installing under view mirrors (For EU)
- 7.20. Installation of under view mirror (Diagonal ladder specification)
- 7.21. Installation of KOMTRAX antenna (If equipped)
- 7.22. Installing left side mudguard
- 7.23. Installing right side mudguard
- 7.24. Preparation of installing body
- 7.25. Welding body
- 7.26. Installing 150mm body spill guard (If equipped)
- 7.27. Installing 250mm body spill guard (If equipped)
- 7.28. Installing platform guard
- 7.29. Slinging body
- 7.30. Installing body hinge pin
- 7.31. Installing hoist cylinder
- 7.32. Installing body shim
- 7.33. Adjusting body shims
- 7.34. Installing muffler flange
- 7.35. Installing body accessories
- 7.36. Connecting dump sensor
- 7.37. Procedure for adjusting dump sensor
- 7.38. Calibrating dump control
- 7.39. Greasing
- 7.40. Touching up
- 7.41. Adjusting suspension
- 7.42. Sticking body decal
- 7.43. Adjustment of view range in mirror (For EU)
- 7.44. Adjustment of view range in mirror (For general overseas countries)
- 7.45. Check and addition of lubricants (1/2)
- 7.46. Check and addition of lubricants (2/2)
- 7.47. C0010 Preparation of welding body
- 7.48. C0020 Assembly of split body
- 7.49. C0030 Tack welding body
- 7.50. C0040 Welding body
- 7.51. C0050 Welding body instruction (1/2)
- 7.52. C0060 Welding body instruction (2/2)
- 7.53. C0070 Turn over the body
- 7.54. C0080 Welding body protector (1/2)
- 7.55. C0090 Welding body protector (2/2)
- 7.56. C0100 Finishing and painting welded parts of body
- 8. Appendix Field assembly inspection report
Reviews
There are no reviews yet.