Bomag BM 1000-30, BM 1200-30, BM 1300-30 Cold Milling Machine Service Manual 00891613

Description

• Model List:
  • BM 1000-30 Cold Milling Machine
  • BM 1200-30 Cold Milling Machine
  • BM 1300-30 Cold Milling Machine

• 1. BM 1000/30 BM 1200/30
• 1.1. BM 1000/30 BM 1200/30
• 2.
• 2.1.
• 3. General
• 3.1. General
• 3.2. Introduction
• 3.3. General
• 3.4. General
• 3.5. Transport work with cranes and lifting tackle
• 3.6. Precautions and codes of conduct for welding work
• 3.7. Old oils
• 3.8. Hydraulics
• 3.9. Hot fuels
• 3.10. Synthetic rubber
• 3.11. Poisonous substances
• 3.12. Battery
• 3.13. Special safety regulations
• 3.14. The values specified in the table apply for screws
• 3.15. The values specified in the table apply for screws
• 3.16. The values specified in the table apply for screws
• 3.17. The values specified in the table apply for screws
• 3.18. The values specified in the table apply for screws
• 3.19. The values specified in the table apply for screws
• 3.20. The values specified in the table apply for screws
• 3.21. The values specified in the table apply for screws
• 3.22. The values specified in the table apply for screws
• 3.23. The values specified in the table apply for screws
• 3.24. The values specified in the table apply for screws
• 3.25. The values specified in the table apply for screws
• 3.26. The values specified in the table apply for screws
• 4. Technical data
• 4.1. Technical data
• 4.2.
• 4.3.
• 4.4.
• 4.5.
• 5. Maintenance
• 5.1. Maintenance
• 5.2. General notes on maintenance
• 5.3. Fuels and lubricants
• 6. Electrics
• 6.1. Electrics
• 6.2. Understanding circuit diagrams
• 6.3. Battery service
• 6.4. Battery service
• 6.5. Battery service
• 6.6. Battery service
• 6.7. Battery service
• 6.8. Starting with jump wires
• 6.9. Operating conditions for height regulation
• 6.10. Operating conditions for height regulation
• 6.11. Differential pressure switch for hydraulic oil
• 6.12. Replacing fuses
• 6.13.
• 6.14.
• 6.15.
• 6.16. Pin assignment for control
• 7. Engine
• 7.1. Engine
• 7.2. Engine attachment parts
• 7.3. Engine attachment parts
• 7.4. Checking the cylinder head ground cable
• 7.5. Checking the cylinder head ground cable
• 7.6. Check the engine oil level
• 7.7. Change engine oil and oil filter cartridge
• 7.8. Check, clean the water separator
• 7.9. Change the fuel prefilter cartridge
• 7.10. Replace the fuel filter cartridge
• 7.11. Service the combustion air filter
• 7.12. Checking the combustion air filter
• 7.13. Check the coolant level
• 7.14. Checking the condition of the coolant hoses
• 7.15. Change the coolant
• 7.16. Clean the cooling fins on engine and hydraulic oil cooler
• 7.17. Check, tighten, replace the generator Vbelt
• 7.18. Checking, tensioning the V belt for the generator system
• 7.19. Cleaning the crankcase ventilation
• 7.20. Check the engine mounts
• 7.21. Checking the valve clearance
• 8. Pump drive
• 8.1. Pump drive
• 8.2. Check, tighten, replace the hydraulic drive Vbelt
• 8.3. Check, tighten, replace the hydraulic drive Vbelt
• 8.4. Check, tighten, replace the hydraulic drive Vbelt
• 9. Milling drive, mechanics
• 9.1. Milling drive, mechanics
• 9.2. Checking, replacing the milling drum Vbelt
• 9.3. Checking, replacing the milling drum Vbelt
• 9.4. Change the oil in the milling drum reduction gear
• 9.5. Oil change in milling drum bearing
• 9.6. Checking/replacing cutting tools, scraper
• 9.7. Retightening the tool holder fastening screws
• 10. Conveyor belts, mechanics
• 10.1. Conveyor belts, mechanics
• 10.2. Conveyor belts
• 10.3. Checking, tightening the conveyor belts
• 10.4. Checking the safety ropes
• 10.5. Lubricating the conveyor belts
• 10.6. Folding / unfolding the loading conveyor belt
• 11. Travel drive, mechanics
• 11.1. Travel drive, mechanics
• 11.2. Checking the track plates
• 11.3. Checking the track plates
• 11.4. Retightening the track shoe fastening screws
• 11.5. Checking the track drive
• 11.6. Lubricating the travel drive
• 11.7. Lubricating the steering system
• 11.8. Oil change in track drive gear
• 12. Service Training Hydraulics
• 12.1. Service Training Hydraulics
• 12.2.
• 12.3.
• 12.4.
• 12.5.
• 13. Hydraulic cylinder
• 13.1. Hydraulic cylinder
• 13.2. Repairing hydraulic cylinders
• 14. Suppliers documentation
• 14.1. Suppliers documentation
• 14.2.
• 14.3.
• 14.4.
• 14.5.
• 14.6.
• 14.7.
• 14.8.
• 14.9.
• 14.10.
• 14.11.
• 14.12.
• 14.13.
• 14.14.
• 14.15.
• 14.16.
• 14.17.
• 14.18.
• 14.19.
• 14.20.
• 14.21.
• 14.22.
• 14.23.
• 14.24.
• 14.25.
• 14.26.
• 14.27.
• 14.28.
• 14.29.
• 15. Circuit diagrams
• 15.1. Circuit diagrams
• 16.
• 16.1.