Bomag BMP 8500 Multi Purpose Compactor Service Manual 00891577

Description

• Model List:
  • BMP 8500 Multi Purpose Compactor

• 1. BMP 8500
• 1.1. BMP 8500
• 2. General
• 2.1. General
• 2.2. Introduction
• 2.3. General
• 2.4. General
• 2.5. Transport work with cranes and lifting tackle
• 2.6. Precautions and codes of conduct for welding work
• 2.7. Operation of highvoltage systems
• 2.8. Old oils
• 2.9. Hydraulics
• 2.10. Hot fuels
• 2.11. Synthetic rubber
• 2.12. Poisonous substances
• 2.13. Battery
• 2.14. Special safety regulations
• 2.15. The values specified in the table apply for screws
• 2.16. The values specified in the table apply for screws
• 2.17. The values specified in the table apply for screws
• 2.18. The values specified in the table apply for screws
• 2.19. The values specified in the table apply for screws
• 2.20. The values specified in the table apply for screws
• 2.21. The values specified in the table apply for screws
• 2.22. The values specified in the table apply for screws
• 2.23. The values specified in the table apply for screws
• 2.24. The values specified in the table apply for screws
• 2.25. The values specified in the table apply for screws
• 2.26. The values specified in the table apply for screws
• 2.27. The values specified in the table apply for screws
• 3. Overall view of machine
• 3.1. Overall view of machine
• 3.2.
• 3.3.
• 3.4.
• 4. BOMAG Multipurpose compactor
• 4.1. BOMAG Multipurpose compactor
• 5. Technical data
• 5.1. Technical data
• 5.2.
• 5.3.
• 5.4.
• 6. Maintenance
• 6.1. Maintenance
• 6.2. General notes on maintenance
• 6.3. Fuels and lubricants
• 6.4. Coolant
• 6.5. Mineral oil based hydraulic oil
• 6.6. Biodegradable hydraulic oil
• 7. EPlan wiring diagrams
• 7.1. EPlan wiring diagrams
• 8. Electrics
• 8.1. Electrics
• 8.2. DTM Series
• 8.3. DTM Series
• 8.4. DTM Series
• 8.5. DTM Series
• 8.6. DTM Series
• 8.7. DTM Series
• 8.8. DTM Series
• 8.9. DTM Series
• 8.10. DTM Series
• 8.11. DTM Series
• 8.12. DTM Series
• 8.13. DTM Series
• 8.14. DTM Series
• 8.15. DTM Series
• 8.16. DTM Series
• 8.17. Battery service, checking the main battery switch
• 8.18. Battery service, checking the main battery switch
• 8.19. Battery service, checking the main battery switch
• 8.20.
• 8.21.
• 8.22.
• 8.23.
• 8.24.
• 8.25.
• 8.26.
• 8.27.
• 8.28.
• 8.29.
• 8.30.
• 8.31.
• 8.32.
• 8.33.
• 8.34.
• 8.35.
• 8.36.
• 8.37.
• 8.38.
• 8.39.
• 8.40.
• 8.41.
• 8.42.
• 8.43.
• 8.44.
• 8.45.
• 8.46.
• 8.47.
• 8.48.
• 8.49.
• 8.50. Entering the machine type code
• 8.51. Replacing, recharging the radio remote control power pack
• 8.52. Marriage of transponder and protection field control
• 8.53. Marriage of transponder and protection field control
• 8.54. BOSS Service Mode
• 8.55. Safety field measurement of the Boss safety system
• 9. Electronic control
• 9.1. Electronic control
• 10. Hydraulics
• 10.1. Hydraulics
• 10.2. Overview
• 10.3. Overview
• 10.4.
• 10.5. Vibration motors
• 10.6. Vibration motors
• 10.7. Vibration motors
• 10.8. Vibration motors
• 10.9. Checking the hydraulic oil level
• 10.10. Checking the hydraulic oil level
• 10.11. Checking the hydraulic oil level
• 10.12. Change hydraulic oil and filter
• 11. Engine
• 11.1. Engine
• 11.2. Check the engine oil level
• 11.3. Check the engine oil level
• 11.4. Check the engine oil level
• 11.5. Changing engine oil and oil filter
• 11.6. Checking the coolant level
• 11.7. Change the coolant
• 11.8. Checking, tensioning, replacing the Vbelt
• 11.9. Clean the cooling fins on engine and hydraulic oil cooler
• 11.10. Changing the fuel precleaner, bleeding the fuel system
• 11.11. Check the water separator
• 11.12. Change the fuel lines
• 11.13. Check, clean, replace the combustion air filter
• 11.14. Check the air intake hose
• 11.15. Checking, adjusting the valve clearance
• 11.16. Checking, adjusting the valve clearance
• 11.17. Checking, adjusting the valve clearance
• 11.18. Checking, adjusting the valve clearance
• 11.19. Checking, adjusting the valve clearance
• 11.20. Checking, adjusting the valve clearance
• 11.21. Checking, adjusting the valve clearance
• 12. Repair overview for drum
• 12.1. Repair overview for drum
• 13. Travel system
• 13.1. Travel system
• 13.2. Assembling/removing the drum extension
• 13.3. Assembling/removing the drum extension
• 13.4. Assembling/removing the drum extension
• 14. Exciter unit
• 14.1. Exciter unit
• 14.2. Change the oil in the vibrator shaft housing
• 14.3. Change the oil in the vibrator shaft housing
• 14.4. Change the oil in the vibrator shaft housing
• 15. Suppliers documentation
• 15.1. Suppliers documentation
• 16. Circuit diagrams
• 16.1. Circuit diagrams
• 17.
• 17.1.