Bomag BW 161 AD-2, BW 202 AD-2 Tandem Vibratory Roller Repair Instructions 00819364

Description

• Model List:
  • BW 161 AD-2 Tandem Vibratory Roller
  • BW 202 AD-2 Tandem Vibratory Roller

• 1. BW 161 AD2 / BW 202 AD2
• 2. Tandem Vibratory Roller
• 2.1. General
• 3. Foreword
• 3.1. Introduction
• 4. Safety regulations
• 4.1. Important notes
• 4.2. General
• 4.3. Special safety regulations
• 4.4. Hydraulics
• 5. General repair instructions
• 5.1. General
• 5.2. Hydraulic system
• 5.3. Seals and gaskets
• 5.4. Electrical system
• 6. Tightening torques
• 6.1. Tightening torques
• 7. Connection overview
• 7.1. Fig. 1 Travel pump
• 7.1.1. Trouble shooting
• 8. General
• 8.1. General notes on trouble shooting in hydraulic systems
• 8.2. Important points for trouble shooting and fault rectification
• 9. Trouble shooting diagram
• 9.1. Machine moves with the travel lever in NEUTRAL
• 9.1.1. Switch OK
• 9.1.2. Coil OK
• 9.1.3. Steering pressure OK
• 9.2. No vibration at front and rear
• 9.2.1. Nozzles OK
• 9.3. Front or rear vibration does not work
• 9.4. Too low front and rear vibration frequency
• 10. Special tools
• 11. Repair overview for drum
• 11.1. Fig. 1 Drum
• 12. Removing and installing the drum
• 13. Changing the rubber buffers
• 14. Repairing the drum
• 14.1. Removing the vibrator unit
• 14.2. Assembling the vibrator unit
• 14.2.1. Fig. 24
• 14.2.2. Fig. 25
• 14.2.3. Fig. 26
• 14.2.4. Fig. 27
• 14.2.5. Fig. 28
• 14.2.6. Fig. 29
• 14.2.7. Fig. 30
• 14.2.8. Fig. 31
• 14.3. Installing the vibrator unit
• 14.3.1. Fig. 32
• 14.3.2. Fig. 33
• 14.3.3. Fig. 34
• 14.3.4. Fig. 35
• 14.3.5. Fig. 36
• 14.3.6. Fig. 37
• 14.3.7. Fig. 38
• 14.3.8. Fig. 39
• 14.3.9. Fig. 40
• 14.3.10. Fig. 41
• 14.3.11. Fig. 42
• 14.3.12. Fig. 43
• 14.3.13. Fig. 44
• 14.3.14. Fig. 45
• 15. Dismantling, assembling the change over weights
• 15.1. Dismantling
• 15.2. Assembly
• 15.2.0.1. Oscillating articulated joint
• 16. Repair overview oscillating articulated joint
• 17. Removing and assembling the crabwalk cylinder
• 18. Removing and installing the oscillating articulated joint
• 19. Dismantling the oscillating articulated joint
• 20. Assembling the oscillating articulated joint
• 20.0.1. Suppliers documentation
• 21. A4VG
• 22. A4FM28
• 23. MS/MSE 02 to 18