Bomag BW 161 ADO-50 Tandem Vibratory Roller Service Training 00840039

Description

• Model List:
  • BW 161 ADO-50 Tandem Vibratory Roller

• 1. Table of contents
• 2. General
• 2.1. General
• 2.2. Concerning your safety
• 2.3. Fuels and lubricants
• 2.4. Table of fuels and lubricants
• 3. Technical data
• 3.1. Technical data
• 3.2. Additional technical data
• 4. Overview of machine
• 4.1. Overview of electric system
• 4.2. Overview of diesel engine
• 4.3. Overview of hydraulics
• 4.4. Overview of water sprinkling system
• 4.5. Overview of air conditioning system
• 4.6. Overview, AD drum
• 4.7. Overview, ADO drum
• 4.8. Information and safety stickers/decals on the machine
• 5. Electric systems
• 5.1. Overview of electric system
• 5.2. Telemecanique switch
• 5.3. Magnetic coil plug
• 5.4. Deutsch plug, series DT and DTM
• 5.5. Servicing the battery, checking the main battery switch
• 5.6. Starting the engine with jump leads
• 5.7. Asphalt temperature sensor, B106
• 5.8. Acceleration transducer, B84 B85
• 5.9. Switching on the pressure sprinkler system
• 5.10. Data collector, A80
• 5.11. Differential pressure switch for hydraulic oil filter, B21
• 5.12. Air filter vacuum switch, B03
• 5.13. Sensor, water in fuel filter, B124
• 5.14. Float switch in coolant compensation tank, B55
• 5.15. Oil pressure switch, B06
• 5.16. Coolant temperature switch, B53
• 5.17. Removing and assembling the coolant temperature switch
• 5.18. Boost fuel solenoid valve
• 5.19. Engine solenoid to shut down the engine, Y58
• 5.20. Electric throttle control, Y120
• 5.21. Heating flange on engine
• 5.22. Checking the heating flange control
• 5.23. Charge control lamp
• 5.24. Fuse assignment
• 5.25. Power board
• 5.26. Operators stand
• 5.27. Electric system, old version
• 6. Diesel engine
• 6.1. Overview of diesel engine
• 6.2. Service side
• 6.3. Starter side
• 6.4. Lubrication oil circuit
• 6.5. Coolant circuit
• 6.6. Replacing the thermostat
• 6.7. Fuel supply
• 6.8. Injection system
• 6.9. Injection pump replacement during service
• 6.10. Injection valve replacement during service
• 6.11. Checking / repairing injection valves
• 6.12. Inspection and maintenance work
• 7. Hydraulic system
• 7.1. Overview of hydraulics
• 7.2. Open and closed hydraulic circuit
• 7.3. Hydraulic units
• 7.4. Charge circuit and fan circuit
• 7.5. Travel circuit
• 7.6. Vibration circuit
• 7.7. Steering and crabwalk
• 7.8. Edge cutter
• 7.9. Inspection and maintenance work
• 7.10. Tests and adjustments
• 7.11. Flushing and bleeding
• 8. Water spraying system
• 8.1. Overview of water sprinkling system
• 8.2. Inspection and maintenance work
• 9. Air conditioning
• 9.1. Overview of air conditioning system
• 9.2. Physical principles
• 9.3. Refrigerant R134a
• 9.4. Compressor oil / refrigeration oil
• 9.5. Working principle of the air conditioning system
• 9.6. Monitoring devices
• 9.7. Description of components
• 9.8. Compressor
• 9.9. Emptying in case of repair
• 9.10. Drying and evacuation
• 9.11. Filling instructions
• 9.12. Steam table for R134a
• 9.13. Inspection and maintenance work
• 10. Drum
• 10.1. Overview, AD drum
• 10.2. Overview, ADO drum
• 10.3. Inspection and maintenance work
• 11. Troubleshooting
• 11.1. Preliminary remarks
• 11.2. What to do in events of emergency
• 11.3. Troubleshooting, electrical systems
• 11.4. Trouble shooting, diesel engine
• 11.5. Trouble shooting, hydraulics
• 11.6. Trouble shooting, air conditioning system
• 12. Special tools
• 12.1. Special tools, electrics
• 12.2. Special tools, hydraulic system
• 12.3. Special tools for drum
• 12.4. List of special tools
• 13. Appendix
• 13.1. A Circuit diagrams