Bomag BW 174 AP-4 Tandem Vibratory Roller Service Training 00891921

Description

• Model List:
  • BW 174 AP-4 Tandem Vibratory Roller

• 1. BW 174 AP4
• 1.1. BW 174 AP4
• 2. General
• 2.1. General
• 2.2. Introduction
• 2.3. General
• 2.4. General
• 2.5. Transport work with cranes and lifting tackle
• 2.6. Precautions and codes of conduct for welding work
• 2.7. Old oils
• 2.8. Hydraulics
• 2.9. Hot fuels
• 2.10. Synthetic rubber
• 2.11. Poisonous substances
• 2.12. Air conditioning system
• 2.13. Battery
• 2.14. Special safety regulations
• 2.15. The values specified in the table apply for screws
• 2.16. The values specified in the table apply for screws
• 2.17. The values specified in the table apply for screws
• 2.18. The values specified in the table apply for screws
• 2.19. The values specified in the table apply for screws
• 2.20. The values specified in the table apply for screws
• 2.21. The values specified in the table apply for screws
• 2.22. The values specified in the table apply for screws
• 2.23. The values specified in the table apply for screws
• 2.24. The values specified in the table apply for screws
• 2.25. The values specified in the table apply for screws
• 2.26. The values specified in the table apply for screws
• 2.27. The values specified in the table apply for screws
• 2.28. The values specified in the table apply for screws
• 3. Pivot steered tandem rollers
• 3.1. Pivot steered tandem rollers
• 4. Technical data
• 4.1. Technical data
• 4.2.
• 4.3.
• 4.4.
• 5. Maintenance
• 5.1. Maintenance
• 5.2. General notes on maintenance
• 5.3. Fuels and lubricants
• 5.4. Coolant
• 5.5. Mineral oil based hydraulic oil
• 5.6. Biodegradable hydraulic oil
• 5.7. Gear oil
• 5.8. Lubrication grease
• 6. EPlan wiring diagrams
• 6.1. EPlan wiring diagrams
• 7. Electrics
• 7.1. Electrics
• 7.2. Battery service, checking the main battery switch
• 7.3. Battery service, checking the main battery switch
• 7.4.
• 7.5.
• 7.6.
• 7.7.
• 7.8. Starting with jump wires
• 7.9.
• 7.10. S37, rotary switch for direction indicators
• 7.11. Cabin light
• 7.12.
• 7.13.
• 7.14.
• 7.15.
• 8. Electronic modules
• 8.1. Electronic modules
• 8.2.
• 8.3.
• 8.4.
• 8.5.
• 8.6.
• 8.7.
• 8.8.
• 8.9.
• 9. Hydraulics
• 9.1. Hydraulics
• 9.2. Variable displacement pumps, A10VG28/45/56 EP
• 9.3. Variable displacement pumps, A10VG28/45/56 EP
• 9.4. Variable displacement pumps, A10VG28/45/56 EP
• 9.5. Swash plate principle
• 9.6. Variable displacement pump, A10VG45 EP
• 9.7. Variable displacement pump, A10VG45 EP
• 9.8. Swash plate principle
• 9.9. Flow divider
• 9.10. Flow divider
• 9.11. Travel motors
• 9.12. Plugin fixed displacement motors A2FE and A2FM
• 9.13. Vibration motors A4FM22/28
• 9.14. Vibration motors A4FM22/28
• 9.15. Vibration motors A4FM22/28
• 9.16. Vibration control valve
• 9.17. External gear pumps
• 9.18. External gear pumps
• 9.19. Multiple gear pumps
• 9.20. Check the hydraulic oil level
• 9.21. Changing hydraulic oil and breather filter
• 9.22. Change the hydraulic oil filter
• 9.23. Changing the bypass filter
• 10. Test and adjustment points
• 10.1. Test and adjustment points
• 10.2. Test and adjustment points travel and vibration pumps
• 10.3. Test and adjustment points travel and vibration pumps
• 11. Tests and adjustments
• 11.1. Tests and adjustments
• 11.2. Activate service mode
• 11.3. Activate service mode
• 11.4. Driving against the closed brake
• 11.5. Turn the steering against an end stop.
• 11.6. Checking the rotation speeds
• 11.7. Pressure tests in the travel circuit
• 11.8. Checking / adjusting the neutral positions of the travel pump
• 11.9. Checking the setting of the high pressure relief valves in the travel circuit
• 11.10. Pressure tests in the vibration circuit
• 11.11. Check the setting of the high pressure relief valves in the vibration circuit
• 11.12. Checking / adjusting the vibrator shaft speeds
• 11.13. Checking the leakage rate of the vibration motor
• 11.14. Pressure test in steering circuit
• 12. Trouble shooting
• 12.1. Trouble shooting
• 13. Flushing and bleeding
• 13.1. Flushing and bleeding
• 13.2. Special tools for flushing
• 13.3. Bleeding the vibration circuit
• 13.4. Bleeding the vibration circuit
• 14. Air conditioning system
• 14.1. Air conditioning system
• 14.2. Servicing the air conditioning
• 14.3. Servicing the air conditioning
• 14.4. Servicing the air conditioning
• 14.5. Servicing the air conditioning
• 15. Engine
• 15.1. Engine
• 15.2. Checking the coolant level
• 15.3. Checking the coolant level
• 15.4. Checking the coolant level
• 15.5. Checking the coolant level
• 15.6. Checking the coolant level
• 15.7. Checking the antifreeze concentration and the condition of the coolant
• 15.8. Changing the coolant
• 15.9. Clean the cooling fins on engine and hydraulic oil cooler
• 15.10. Checking radiator hoses and hose clamps
• 15.11. Check the turbo charger
• 15.12. Check the turbo charger
• 15.13. Checking the engine oil level
• 15.14. Change engine oil and oil filter cartridge
• 15.15. Changing the fuel filter
• 15.16. Changing the fuel filter
• 15.17. Checking, cleaning the water separator
• 15.18. Checking fuel lines and clamps
• 15.19. Checking the fuel injection nozzles
• 15.20. Check the fuel injection timing
• 15.21. Check the fuel injection pump
• 15.22. Servicing the belt drive
• 15.23. Check the air intake lines
• 15.24. Check, clean, replace the combustion air filter
• 15.25. Checking the engine mounts
• 15.26. Engine conservation
• 15.27. Check, adjust the valve clearance
• 16. Drum
• 16.1. Drum
• 17. Circuit diagrams
• 17.1. Circuit diagrams