Bomag BW 174 AP AM, BW 174 ACP AM Tandem Vibratory Roller Service Manual 00891520

Description

• Model List:
  • BW 174 AP AM Tandem Vibratory Roller
  • BW 174 ACP AM Tandem Vibratory Roller

• 1. BW 174 AP AM / BW 174 ACP AM
• 1.1. BW 174 AP AM / BW 174 ACP AM
• 2.
• 2.1.
• 3. General
• 3.1. General
• 3.2. Introduction
• 3.3. General
• 3.4. General
• 3.5. Transport work with cranes and lifting tackle
• 3.6. Precautions and codes of conduct for welding work
• 3.7. Old oils
• 3.8. Hydraulics
• 3.9. Hot fuels
• 3.10. Synthetic rubber
• 3.11. Poisonous substances
• 3.12. Air conditioning system
• 3.13. Battery
• 3.14. Special safety regulations
• 3.15. The values specified in the table apply for screws
• 3.16. The values specified in the table apply for screws
• 3.17. The values specified in the table apply for screws
• 3.18. The values specified in the table apply for screws
• 3.19. The values specified in the table apply for screws
• 3.20. The values specified in the table apply for screws
• 3.21. The values specified in the table apply for screws
• 3.22. The values specified in the table apply for screws
• 3.23. The values specified in the table apply for screws
• 3.24. The values specified in the table apply for screws
• 3.25. The values specified in the table apply for screws
• 3.26. The values specified in the table apply for screws
• 3.27. The values specified in the table apply for screws
• 3.28. The values specified in the table apply for screws
• 4. Technical data
• 4.1. Technical data
• 4.2.
• 4.3.
• 5. Maintenance
• 5.1. Maintenance
• 5.2. General notes on maintenance
• 5.3. Fuels and lubricants
• 6. Test and adjustment points
• 6.1. Test and adjustment points
• 6.2. Test and adjustment points travel and vibration pumps
• 6.3. Test and adjustment points travel and vibration pumps
• 7. Tests and adjustments
• 7.1. Tests and adjustments
• 7.2. Activate service mode
• 7.3. Activate service mode
• 7.4. Driving against the closed brake
• 7.5. Turn the steering against an end stop.
• 7.6. Checking the rotation speeds
• 7.7. Pressure tests in the travel circuit
• 7.8. Checking / adjusting the neutral positions of the travel pump
• 7.9. Checking the setting of the high pressure relief valves in the travel circuit
• 7.10. Pressure tests in the vibration circuit
• 7.11. Check the setting of the high pressure relief valves in the vibration circuit
• 7.12. Checking / adjusting the vibrator shaft speeds
• 7.13. Checking the leakage rate of the vibration motor
• 7.14. Pressure test in steering circuit
• 8. Flushing and bleeding
• 8.1. Flushing and bleeding
• 8.2. Special tools for flushing
• 8.3. Bleeding the vibration circuit
• 8.4. Bleeding the vibration circuit
• 9. Trouble shooting
• 9.1. Trouble shooting
• 10. Electrics
• 10.1. Electrics
• 11. Electronic controls
• 11.1. Electronic controls
• 12. Service Training
• 12.1. Service Training
• 13. Installing the air conditioning system
• 13.1. Installing the air conditioning system
• 14. Air conditioning system
• 14.1. Air conditioning system
• 14.2. Service the air conditioning
• 14.3. Service the air conditioning
• 14.4. Service the air conditioning
• 14.5. Service the air conditioning
• 14.6. Checking the condition and tension of the cooling fan V belt, replacing the Vbelt
• 15. Engine
• 15.1. Engine
• 15.2. Check the engine oil level
• 15.3. Check the engine oil level
• 15.4. Check the engine oil level
• 15.5. Check the engine oil level
• 15.6. Check the engine oil level
• 15.7. Check the engine oil level
• 15.8. Check the engine oil level
• 15.9. Changing engine oil and oil filter cartridge
• 15.10. Change the fuel filter cartridge
• 15.11. Check, clean the water separator
• 15.12. Checking the condition and tension of the cooling fan V belt, replacing the Vbelt
• 15.13. Checking the condition and tension of the generator V belt, replace the Vbelt
• 15.14. Change the coolant
• 15.15. Clean the cooling fins on engine and hydraulic oil cooler
• 15.16. Check, clean, change the combustion air filter
• 15.17. Check the engine mounts
• 15.18. Check the engine mounts
• 15.19. Engine conservation
• 16. Drum
• 16.1. Drum
• 16.2. Special tools, drum (BW 174/AP/ACP)
• 16.3. Assembling the APdrum
• 16.4. Assembling the APdrum
• 16.5. Assembling the APdrum
• 16.6. Assembling the APdrum
• 16.7. Assembling the APdrum
• 17. Pivot steering
• 17.1. Pivot steering
• 17.2. Removing, repairing and installing the pivot steering
• 17.3. Removing, repairing and installing the pivot steering
• 17.4. Repairing the oscillation joint
• 18. Vibration valve Y54/Y55
• 18.1. Vibration valve Y54/Y55
• 19. Suppliers documentation
• 19.1. Suppliers documentation
• 19.2.
• 19.3.
• 19.4.
• 19.5.
• 19.6.
• 19.7.
• 19.8.
• 19.9.
• 19.10.
• 19.11.
• 19.12.
• 20. Circuit diagrams
• 20.1. Circuit diagrams
• 21.
• 21.1.