Bomag BW 211 D-40 to BW 213 PD-40 Single Drum Roller Service Training 00891879

Description

• Model List:
  • BW 211 D-40 Single Drum Roller
  • BW 211 PD-40 Single Drum Roller
  • BW 212 D-40 Single Drum Roller
  • BW 212 PD-40 Single Drum Roller
  • BW 213 D-40 Single Drum Roller
  • BW 213 PD-40 Single Drum Roller

• 1. BW 211 / 212 / 213 D40
• 1.1. BW 211 / 212 / 213 D40
• 2.
• 2.1.
• 3. General
• 3.1. General
• 3.2. Introduction
• 3.3. General
• 3.4. General
• 3.5. Transport work with cranes and lifting tackle
• 3.6. Precautions and codes of conduct for welding work
• 3.7. Old oils
• 3.8. Hydraulics
• 3.9. Hot fuels
• 3.10. Synthetic rubber
• 3.11. Poisonous substances
• 3.12. Air conditioning system
• 3.13. Battery
• 3.14. Special safety regulations
• 3.15. The values specified in the table apply for screws
• 3.16. The values specified in the table apply for screws
• 3.17. The values specified in the table apply for screws
• 3.18. The values specified in the table apply for screws
• 3.19. The values specified in the table apply for screws
• 3.20. The values specified in the table apply for screws
• 3.21. The values specified in the table apply for screws
• 3.22. The values specified in the table apply for screws
• 3.23. The values specified in the table apply for screws
• 3.24. The values specified in the table apply for screws
• 3.25. The values specified in the table apply for screws
• 3.26. The values specified in the table apply for screws
• 3.27. The values specified in the table apply for screws
• 3.28. The values specified in the table apply for screws
• 4. Technical data
• 4.1. Technical data
• 4.2.
• 4.3.
• 4.4.
• 4.5.
• 4.6.
• 4.7.
• 5. Maintenance
• 5.1. Maintenance
• 5.2. General notes on maintenance
• 5.3. Fuels and lubricants
• 6. Connection overview
• 6.1. Connection overview
• 7. Tests and adjustments
• 7.1. Tests and adjustments
• 7.2. Checking the rotation speeds
• 7.3. Checking the rotation speeds
• 7.4. Checking / adjusting the neutral positions of the travel pump
• 7.5. Pressure tests in the travel circuit
• 7.6. Checking / adjusting the vibrator shaft speeds
• 7.7. Pressure measurements in the vibration circuit
• 7.8. Check the leakage rate of the vibration motor
• 7.9. Pressure test in steering circuit
• 8. Flushing and bleeding
• 8.1. Flushing and bleeding
• 8.2. Special tools for flushing
• 8.3. Bleeding the vibration circuit
• 8.4. Bleeding the vibration circuit
• 8.5. Bleeding the vibration circuit
• 9. EPlan wiring diagrams
• 9.1. EPlan wiring diagrams
• 10. Electrics
• 10.1. Electrics
• 10.2. Battery maintenance
• 10.3. Battery maintenance
• 10.4.
• 10.5.
• 10.6. Starting with jump wires
• 10.7.
• 10.8.
• 10.9. S00, ignition switch
• 10.10.
• 10.11.
• 10.12. S00, start switch
• 10.13.
• 10.14.
• 10.15.
• 10.16.
• 10.17.
• 10.18.
• 10.19.
• 10.20.
• 10.21.
• 10.22.
• 10.23.
• 11. Electronic modules
• 11.1. Electronic modules
• 11.2.
• 11.3.
• 11.4.
• 11.5.
• 11.6.
• 11.7.
• 11.8.
• 11.9.
• 11.10.
• 11.11.
• 11.12.
• 11.13.
• 11.14.
• 11.15.
• 11.16.
• 12. Speedometer Module
• 12.1. Speedometer Module
• 13. Service Training
• 13.1. Service Training
• 13.2.
• 13.3.
• 13.4.
• 13.5.
• 14. Engine
• 14.1. Engine
• 14.2. Check the engine oil level
• 14.3. Check the engine oil level
• 14.4. Check the engine oil level
• 14.5. Check the engine oil level
• 14.6. Check the engine oil level
• 14.7. Check the engine oil level
• 14.8. Changing engine oil and oil filter cartridges
• 14.9. Check the coolant level
• 14.10. Check the coolant level
• 14.11. Check the coolant level
• 14.12. Check the coolant level
• 14.13. Change the coolant
• 14.14. Checking the antifreeze concentration
• 14.15. Clean the cooling fins on engine and hydraulic oil cooler
• 14.16. Check, clean the water separator
• 14.17. Check, clean the water separator
• 14.18. Check, clean the water separator
• 14.19. Check, clean the water separator
• 14.20. Check, clean the water separator
• 14.21. Check, clean the water separator
• 14.22. Check, clean the water separator
• 14.23. Check, clean the water separator
• 14.24. Change the fuel prefilter cartridge
• 14.25. Change the fuel filter cartridge
• 14.26. Check, adjust the valve clearance
• 14.27. Check, adjust the valve clearance
• 14.28. Cleaning, changing the dry air filter cartridge
• 14.29. Heating flange on engine
• 15. Air conditioning system
• 15.1. Air conditioning system
• 15.2. Checking, replacing the refrigerant compressor Vbelt
• 15.3. Checking, replacing the refrigerant compressor Vbelt
• 15.4. Checking, replacing the refrigerant compressor Vbelt
• 15.5. Checking, replacing the refrigerant compressor Vbelt
• 15.6. Air conditioning
• 15.7. Service the air conditioning
• 16. Drum
• 16.1. Drum
• 17. Circuit diagrams
• 17.1. Circuit diagrams
• 17.8. Wiring diagram 9
• 17.9. Wiring diagram 9
• 17.10. Wiring diagram 9
• 17.11. Wiring diagram 9
• 17.12. Wiring diagram 9
• 17.13. Wiring diagram 9