Bomag BW 213 DH-4 to BW 213 DH-4 With Attachment Plate Single Drum Roller Service Training 00891891

Description

• Model List:
  • BW 213 DH-4 Single Drum Roller
  • BW 213 PDH-4 Single Drum Roller
  • BW 214 DH-4 Single Drum Roller
  • BW 214 PDH-4 Single Drum Roller
  • BW 213 DH-4 With Attachment Plate Single Drum Roller

• 1. BW 213 DH4 / PDH4
• 1.1. BW 213 DH4 / PDH4
• 2. General
• 2.1. General
• 2.2. Introduction
• 2.3. General
• 2.4. General
• 2.5. Transport work with cranes and lifting tackle
• 2.6. Precautions and codes of conduct for welding work
• 2.7. Operation of highvoltage systems
• 2.8. Old oils
• 2.9. Hydraulics
• 2.10. Hot fuels
• 2.11. Synthetic rubber
• 2.12. Poisonous substances
• 2.13. Air conditioning system
• 2.14. Battery
• 2.15. Special safety regulations
• 2.16. The values specified in the table apply for screws
• 2.17. The values specified in the table apply for screws
• 2.18. The values specified in the table apply for screws
• 2.19. The values specified in the table apply for screws
• 2.20. The values specified in the table apply for screws
• 2.21. The values specified in the table apply for screws
• 2.22. The values specified in the table apply for screws
• 2.23. The values specified in the table apply for screws
• 2.24. The values specified in the table apply for screws
• 2.25. The values specified in the table apply for screws
• 2.26. The values specified in the table apply for screws
• 2.27. The values specified in the table apply for screws
• 2.28. The values specified in the table apply for screws
• 2.29. The values specified in the table apply for screws
• 2.30. The values specified in the table apply for screws
• 3. BOMAG single drum rollers
• 3.1. BOMAG single drum rollers
• 3.2. The vibration systems.
• 3.3. The vibration systems.
• 3.4. Infinitely variable, intelligent and flexible BOMAG VARIOCONTROL (BVC)
• 4. Technical data
• 4.1. Technical data
• 4.2.
• 4.3.
• 4.4. The following noise and vibration data acc. to
• 4.5. The following noise and vibration data acc. to
• 5. Maintenance
• 5.1. Maintenance
• 5.2. General notes on maintenance
• 5.3. Fuels and lubricants
• 5.4. Coolant
• 5.5. Mineral oil based hydraulic oil
• 5.6. Biodegradable hydraulic oil
• 5.7. Oil for drive axle
• 5.8. Lubrication grease
• 6. EPlan wiring diagrams
• 6.1. EPlan wiring diagrams
• 7. Electrics
• 7.1. Electrics
• 7.2. Battery service
• 7.3. Battery service
• 7.4. Battery service
• 7.5. Battery service
• 7.6. Battery service
• 7.7. Battery service
• 7.8. Battery service
• 7.9. Starting with jump wires
• 7.10.
• 7.11.
• 7.12.
• 7.13.
• 7.14. S00, ignition switch
• 7.15.
• 7.16.
• 7.17.
• 7.18.
• 7.19.
• 7.20.
• 7.21.
• 7.22.
• 7.23.
• 8. Electronic modules
• 8.1. Electronic modules
• 8.2.
• 8.3.
• 8.4.
• 8.5.
• 8.6.
• 8.7.
• 8.8.
• 8.9.
• 8.10.
• 9. Engine electrics
• 9.1. Engine electrics
• 10. Hydraulics
• 10.1. Hydraulics
• 10.2. Travel and vibration pump, H1
• 10.3. Travel and vibration pump, H1
• 10.4. Variable displacement pump, H1 P 078/100 RA
• 10.5.
• 10.6. Swash plate principle, pump
• 10.7. Swash plate motor with variable displacement, series 51
• 10.8. Swash plate motor with variable displacement, series 51
• 10.9. Description of function
• 10.10. Description of function
• 10.11. Flushing valve
• 10.12. Swash plate principle, motor
• 10.13. Swash plate principle, motor
• 10.14. External gear pumps
• 10.15. External gear pumps
• 10.16. Brake control
• 10.17. Stopping the machine, operating the parking brake
• 10.18. Towing in case of an engine failure
• 10.19. Adjust the parking brake
• 10.20. Vibration motor
• 10.21. Articulated joint
• 10.22. Check the hydraulic oil level
• 10.23. Changing hydraulic oil and breather filter
• 10.24. Replace hydraulic oil filter
• 11. Tests and adjustments
• 11.1. Tests and adjustments
• 11.2. Activate service mode
• 11.3. Activate service mode
• 11.4. Driving against the closed brake
• 11.5. Check the leakage rate of the vibration motor
• 11.6. Pressure test in steering circuit
• 12. Flushing and bleeding
• 12.1. Flushing and bleeding
• 12.2. Special tools for flushing
• 12.3. Bleeding the vibration circuit
• 12.4. Bleeding the vibration circuit
• 12.5. Bleeding the vibration circuit
• 13. Engine
• 13.1. Engine
• 13.2. Check the engine oil level
• 13.3. Check the engine oil level
• 13.4. Changing engine oil and oil filter cartridges
• 13.5. Change the fuel prefilter cartridge
• 13.6. Replace the fuel filter cartridge
• 13.7. Check, clean the water separator
• 13.8. Check the coolant level
• 13.9. Change the coolant
• 13.10. Combustion air filter service
• 13.11. Check the dust separator
• 13.12. Cleaning the oil bath air filter
• 13.13. Adjusting the valve clearance
• 13.14. Adjusting the control piston play
• 13.15. Checking / replacing the ribbed Vbelt
• 13.16. Check the engine mounts
• 13.17. Replacing the crank case ventilation valve
• 13.18. Engine conservation
• 14. Air conditioning system
• 14.1. Air conditioning system
• 14.2. Checking, replacing the refrigerant compressor Vbelt
• 14.3. Checking, replacing the refrigerant compressor Vbelt
• 14.4. Checking, replacing the refrigerant compressor Vbelt
• 14.5. Checking, replacing the refrigerant compressor Vbelt
• 14.6. Service the air conditioning
• 15. Drum
• 15.1. Drum
• 16. Circuit diagrams
• 16.1. Circuit diagrams
• 17.
• 17.1.