Bomag BW 216 DHC-4, BW 216 PDHC-4 Single Drum Roller Service Training 00891905

Description

• Model List:
  • BW 216 DHC-4 Single Drum Roller
  • BW 216 PDHC-4 Single Drum Roller

• 1. BW 216 DHC4 / BW 216 PDHC4
• 1.1. BW 216 DHC4 / BW 216 PDHC4
• 2.
• 2.1.
• 3. General
• 3.1. General
• 3.2. Introduction
• 3.3. General
• 3.4. General
• 3.5. Transport work with cranes and lifting tackle
• 3.6. Precautions and codes of conduct for welding work
• 3.7. Old oils
• 3.8. Hydraulics
• 3.9. Hot fuels
• 3.10. Synthetic rubber
• 3.11. Poisonous substances
• 3.12. Air conditioning system
• 3.13. Battery
• 3.14. Special safety regulations
• 3.15. The values specified in the table apply for screws
• 3.16. The values specified in the table apply for screws
• 3.17. The values specified in the table apply for screws
• 3.18. The values specified in the table apply for screws
• 3.19. The values specified in the table apply for screws
• 3.20. The values specified in the table apply for screws
• 3.21. The values specified in the table apply for screws
• 3.22. The values specified in the table apply for screws
• 3.23. The values specified in the table apply for screws
• 3.24. The values specified in the table apply for screws
• 3.25. The values specified in the table apply for screws
• 3.26. The values specified in the table apply for screws
• 3.27. The values specified in the table apply for screws
• 3.28. The values specified in the table apply for screws
• 3.29. The values specified in the table apply for screws
• 4. Technical data
• 4.1. Technical data
• 4.2.
• 4.3.
• 4.4.
• 5. Maintenance
• 5.1. Maintenance
• 5.2. General notes on maintenance
• 5.3. Fuels and lubricants
• 6. Connection overview
• 6.1. Connection overview
• 7. Tests and adjustments
• 7.1. Tests and adjustments
• 7.2. Checking the rotation speeds
• 7.3. Checking the rotation speeds
• 7.4. Checking / adjusting the neutral positions of the travel pump
• 7.5. Pressure tests in the travel circuit
• 7.6. Checking / adjusting the vibrator shaft speeds
• 7.7. Pressure measurements in the vibration circuit
• 7.8. Check the leakage rate of the vibration motor
• 7.9. Pressure test in steering circuit
• 8. Flushing and bleeding
• 8.1. Flushing and bleeding
• 8.2. Special tools for flushing
• 8.3. Bleeding the vibration circuit
• 8.4. Bleeding the vibration circuit
• 8.5. Bleeding the vibration circuit
• 9. Caddy wiring diagrams
• 9.1. Caddy wiring diagrams
• 10. Electrics
• 10.1. Electrics
• 10.2. Service the battery
• 10.3. Service the battery
• 10.4. Service the battery
• 10.5. Service the battery
• 10.6.
• 10.7.
• 10.8. Starting with jump wires
• 10.9.
• 10.10.
• 10.11.
• 10.12. S00, start switch
• 10.13.
• 10.14.
• 10.15.
• 10.16.
• 10.17.
• 10.18.
• 10.19.
• 11. Engine electrics
• 11.1. Engine electrics
• 12. Electronic modules
• 12.1. Electronic modules
• 12.2.
• 12.3.
• 12.4.
• 12.5.
• 12.6.
• 12.7.
• 12.8.
• 12.9.
• 12.10.
• 12.11.
• 12.12.
• 12.13.
• 12.14.
• 12.15.
• 12.16.
• 12.17.
• 12.18.
• 12.19.
• 13. Speedometer Module
• 13.1. Speedometer Module
• 14. Service Training
• 14.1. Service Training
• 14.2.
• 14.3.
• 14.4.
• 14.5.
• 15. Engine
• 15.1. Engine
• 15.2. Check the engine oil level
• 15.3. Check the engine oil level
• 15.4. Changing engine oil and oil filter cartridges
• 15.5. Change the fuel prefilter cartridge
• 15.6. Change the fuel filter cartridge
• 15.7. Check, clean the water separator
• 15.8. Check the coolant level
• 15.9. Change the coolant
• 15.10. Combustion air filter service
• 15.11. Check the dust separator
• 15.12. Cleaning the oil bath air filter
• 15.13. Adjusting the valve clearance
• 15.14. Adjusting the control piston play
• 15.15. Checking / replacing the ribbed Vbelt
• 15.16. Check the engine mounts
• 15.17. Replacing the crank case ventilation valve
• 15.18. Engine conservation
• 16. Air conditioning system
• 16.1. Air conditioning system
• 16.2. Checking, replacing the refrigerant compressor Vbelt
• 16.3. Checking, replacing the refrigerant compressor Vbelt
• 16.4. Checking, replacing the refrigerant compressor Vbelt
• 16.5. Checking, replacing the refrigerant compressor Vbelt
• 16.6. Service the air conditioning
• 17. Drum
• 17.1. Drum
• 18. Circuit diagrams
• 18.1. Circuit diagrams
• 18.2.
• 18.3.
• 18.4.
• 18.5.
• 19.
• 19.1.