Bomag BW 219 D-4, BW 219 PD-4 Single Drum Roller Service Training 00891908

Description

• Model List:
  • BW 219 D-4 Single Drum Roller
  • BW 219 PD-4 Single Drum Roller

• 1. BW 219 D4 / PD4
• 1.1. BW 219 D4 / PD4
• 2.
• 2.1.
• 3. General
• 3.1. General
• 3.2. Introduction
• 3.3. General
• 3.4. General
• 3.5. Transport work with cranes and lifting tackle
• 3.6. Precautions and codes of conduct for welding work
• 3.7. Operation of highvoltage systems
• 3.8. Old oils
• 3.9. Hydraulics
• 3.10. Hot fuels
• 3.11. Synthetic rubber
• 3.12. Poisonous substances
• 3.13. Air conditioning system
• 3.14. Battery
• 3.15. Special safety regulations
• 3.16. The values specified in the table apply for screws
• 3.17. The values specified in the table apply for screws
• 3.18. The values specified in the table apply for screws
• 3.19. The values specified in the table apply for screws
• 3.20. The values specified in the table apply for screws
• 3.21. The values specified in the table apply for screws
• 3.22. The values specified in the table apply for screws
• 3.23. The values specified in the table apply for screws
• 3.24. The values specified in the table apply for screws
• 3.25. The values specified in the table apply for screws
• 3.26. The values specified in the table apply for screws
• 3.27. The values specified in the table apply for screws
• 3.28. The values specified in the table apply for screws
• 3.29. The values specified in the table apply for screws
• 3.30. The values specified in the table apply for screws
• 4. Technical data
• 4.1. Technical data
• 4.2.
• 4.3.
• 4.4.
• 5. Maintenance
• 5.1. Maintenance
• 5.2. General notes on maintenance
• 5.3. Fuels and lubricants
• 5.4. Coolant
• 5.5. Mineral oil based hydraulic oil
• 5.6. Biodegradable hydraulic oil
• 5.7. Gear oil
• 5.8. Exciter shaft oil
• 6. EPlan wiring diagrams
• 6.1. EPlan wiring diagrams
• 7. Electrics
• 7.1. Electrics
• 7.2. Charge condition with hydrometer
• 7.3. Charge condition with hydrometer
• 7.4. Charge condition with hydrometer
• 7.5. Charge condition with hydrometer
• 7.6. Charge condition with hydrometer
• 7.7. Charge condition with hydrometer
• 7.8. Charge condition with hydrometer
• 7.9. Charge condition with hydrometer
• 7.10. Service the battery
• 7.11. Service the battery
• 7.12.
• 7.13.
• 7.14. Starting with jump wires
• 7.15.
• 7.16.
• 7.17.
• 7.18. S00, ignition switch
• 7.19.
• 7.20.
• 7.21. S00, start switch
• 7.22.
• 7.23.
• 7.24.
• 7.25.
• 7.26.
• 7.27.
• 7.28.
• 7.29.
• 7.30.
• 7.31.
• 8. Electronic modules
• 8.1. Electronic modules
• 8.2.
• 8.3.
• 8.4.
• 8.5.
• 8.6.
• 8.7.
• 8.8.
• 8.9.
• 8.10.
• 8.11.
• 8.12.
• 8.13.
• 8.14.
• 8.15.
• 8.16.
• 9. Speedometer Module
• 9.1. Speedometer Module
• 10. Engine electrics
• 10.1. Engine electrics
• 11. Engine
• 11.1. Engine
• 11.2. Check the engine oil level
• 11.3. Check the engine oil level
• 11.4. Change engine oil and oil filter cartridge
• 11.5. Change the fuel prefilter cartridge
• 11.6. Replace the fuel filter cartridge
• 11.7. Check, clean the water separator
• 11.8. Check the coolant level
• 11.9. Change the coolant
• 11.10. Service the combustion air filter
• 11.11. Service the combustion air filter
• 11.12. Check the dust separator
• 11.13. Cleaning the oil bath air filter
• 11.14. Adjust the valve clearance
• 11.15. Checking / replacing the ribbed Vbelt
• 11.16. Check the engine mounts
• 11.17. Replacing the crank case pressure ventilation valve
• 11.18. Engine conservation
• 12. Hydraulics
• 12.1. Hydraulics
• 12.2. Variable displacement pumps, 90R055 and 90R075
• 12.3. Variable displacement pumps, 90R055 and 90R075
• 12.4. Variable displacement pumps, 90R055 and 90R075
• 12.5. Variable displacement pumps, 90R055 and 90R075
• 12.6. Variable displacement pump, 90R055
• 12.7. Variable displacement pump, 90R055
• 12.8. Swash plate principle, pump
• 12.9. Swash plate principle, pump
• 12.10. Swash plate motor with variable displacement, series 51
• 12.11. Swash plate motor with variable displacement, series 51
• 12.12. Vibration motor
• 12.13. Vibration motor
• 12.14. Swash plate principle, motor
• 12.15. Swash plate principle, motor
• 12.16. External gear pumps
• 12.17. External gear pumps
• 12.18. Brake control
• 12.19. Stopping the machine, operating the parking brake
• 12.20. Towing in case of an engine failure
• 12.21. Adjust the parking brake
• 12.22. Articulated joint
• 12.23. Check the hydraulic oil level
• 12.24. Changing hydraulic oil and breather filter
• 12.25. Changing the hydraulic oil filter
• 12.26. Changing the bypass filter
• 13. Tests and adjustments
• 13.1. Tests and adjustments
• 13.2. Checking / adjusting the neutral positions of the travel pump
• 13.3. Checking / adjusting the neutral positions of the travel pump
• 13.4. Pressure tests in the travel circuit
• 13.5. Checking / adjusting the vibrator shaft speeds
• 13.6. Pressure measurements in the vibration circuit
• 13.7. Check the leakage rate of the vibration motor
• 13.8. Pressure test in steering circuit
• 14. Flushing and bleeding
• 14.1. Flushing and bleeding
• 14.2. Special tools for flushing
• 14.3. Bleeding the vibration circuit
• 14.4. Bleeding the vibration circuit
• 14.5. Bleeding the vibration circuit
• 15. Air conditioning system
• 15.1. Air conditioning system
• 15.2. Checking, replacing the refrigerant compressor Vbelt
• 15.3. Checking, replacing the refrigerant compressor Vbelt
• 15.4. Checking, replacing the refrigerant compressor Vbelt
• 15.5. Checking, replacing the refrigerant compressor Vbelt
• 15.6. Air conditioning
• 15.7. Service the air conditioning
• 16. Drum
• 16.1. Drum
• 17. Circuit diagrams
• 17.1. Circuit diagrams
• 17.2. S/N Wiring diagram 10
• 17.3. S/N Wiring diagram 10
• 17.4. S/N Wiring diagram 10
• 17.5. S/N Wiring diagram 10
• 17.6. S/N Wiring diagram 10
• 17.7. S/N Wiring diagram 10
• 17.8. S/N Wiring diagram 10
• 17.9. S/N Wiring diagram 10
• 18.
• 18.1.