Bomag BW 226 DH-4 BVC Single Drum Roller Service Training 00891790

Description

• Model List:
  • BW 226 DH-4 BVC Single Drum Roller

• 1. BW 226 DH4
• 1.1. BW 226 DH4
• 2. General
• 2.1. General
• 2.2. Introduction
• 2.3. General
• 2.4. General
• 2.5. Transport work with cranes and lifting tackle
• 2.6. Precautions and codes of conduct for welding work
• 2.7. Operation of highvoltage systems
• 2.8. Old oils
• 2.9. Hydraulics
• 2.10. Hot fuels
• 2.11. Synthetic rubber
• 2.12. Poisonous substances
• 2.13. Air conditioning system
• 2.14. Battery
• 2.15. Special safety regulations
• 2.16. The values specified in the table apply for screws
• 2.17. The values specified in the table apply for screws
• 2.18. The values specified in the table apply for screws
• 2.19. The values specified in the table apply for screws
• 2.20. The values specified in the table apply for screws
• 2.21. The values specified in the table apply for screws
• 2.22. The values specified in the table apply for screws
• 2.23. The values specified in the table apply for screws
• 2.24. The values specified in the table apply for screws
• 2.25. The values specified in the table apply for screws
• 2.26. The values specified in the table apply for screws
• 2.27. The values specified in the table apply for screws
• 2.28. The values specified in the table apply for screws
• 2.29. The values specified in the table apply for screws
• 2.30. The values specified in the table apply for screws
• 3. BOMAG single drum rollers
• 3.1. BOMAG single drum rollers
• 3.2. The vibration systems.
• 3.3. The vibration systems.
• 3.4. Infinitely variable, intelligent and flexible BOMAG VARIOCONTROL (BVC)
• 4. Technical data
• 4.1. Technical data
• 4.2.
• 4.3.
• 4.4.
• 5. Maintenance
• 5.1. Maintenance
• 5.2. General notes on maintenance
• 5.3. Fuels and lubricants
• 5.4. Coolant
• 5.5. Mineral oil based hydraulic oil
• 5.6. Biodegradable hydraulic oil
• 5.7. Oil for drive axle
• 5.8. Oil for Vario vibration unit
• 5.9. Lubrication grease
• 6. EPlan wiring diagrams
• 6.1. EPlan wiring diagrams
• 7. Electrics
• 7.1. Electrics
• 7.2. Battery service
• 7.3. Starting with jump wires
• 7.4.
• 7.5.
• 7.6.
• 7.7.
• 7.8. S00, starter switch
• 7.9.
• 7.10.
• 7.11.
• 7.12.
• 7.13.
• 7.14.
• 7.15.
• 7.16.
• 7.17.
• 8. Electronic modules
• 8.1. Electronic modules
• 8.2.
• 8.3.
• 8.4.
• 8.5.
• 8.6.
• 8.7.
• 9. Engine electrics
• 9.1. Engine electrics
• 10. BOMAG, Variocontrol
• 10.1. BOMAG, Variocontrol
• 10.2. Infinitely variable, intelligent and flexible BOMAG VARIOCONTROL (BVC)
• 10.3. Infinitely variable, intelligent and flexible BOMAG VARIOCONTROL (BVC)
• 10.4. Exciter unit
• 10.5.
• 10.6. Automatic measuring and controlling
• 10.7. BVC/BTM05 settings before startup
• 10.8. BVC/BTM05 settings before startup
• 10.9. BVC/BTM05 settings before startup
• 10.10. BVC/BTM05 settings before startup
• 10.11. BVC/BTM05 settings before startup
• 10.12. BVC/BTM05 settings before startup
• 10.13. Variocontrol, selecting the operating mode
• 10.14. Measuring pass with Variocontrol
• 10.15. Teaching distance pulses
• 10.16. Amplitude limitation (BVC only)
• 11. Hydraulics
• 11.1. Hydraulics
• 11.2. Travel and vibration pump, H1
• 11.3. Travel and vibration pump, H1
• 11.4. Variable displacement pump, H1 P 078/100 RA
• 11.5.
• 11.6. Swash plate principle, pump
• 11.7. Swash plate motor with variable displacement, series 51
• 11.8. Swash plate motor with variable displacement, series 51
• 11.9. Description of function
• 11.10. Description of function
• 11.11. Flushing valve
• 11.12. Swash plate principle, motor
• 11.13. External gear pumps
• 11.14. External gear pumps
• 11.15. Multiple gear pumps
• 11.16. Slewing motor
• 11.17. Slewing motor
• 11.18. Brake control
• 11.19. Stopping the machine, operating the parking brake
• 11.20. Towing in case of an engine failure
• 11.21. Adjust the parking brake
• 11.22. Exciter unit
• 11.23. Exciter unit
• 11.24. Hydraulic diagram
• 11.25. Check the hydraulic oil level
• 11.26. Changing hydraulic oil and breather filter
• 11.27. Replace hydraulic oil filter
• 12. Electric steering
• 12.1. Electric steering
• 12.2. Articulated joint
• 12.3. Articulated joint
• 12.4. External gear pumps
• 12.5. Multiple gear pumps
• 13. Hydraulic steering (optional)
• 13.1. Hydraulic steering (optional)
• 13.2. Articulated joint
• 14. Tests and adjustments
• 14.1. Tests and adjustments
• 14.2. Activate service mode
• 14.3. Activate service mode
• 14.4. Driving against the closed brake
• 14.5. Turn the steering against an end stop.
• 14.6. Check the leakage rate of the vibration motor
• 14.7. Pressure test in steering circuit
• 15. Flushing and bleeding
• 15.1. Flushing and bleeding
• 15.2. Special tools for flushing
• 15.3. Bleeding the vibration circuit
• 15.4. Bleeding the vibration circuit
• 15.5. Bleeding the vibration circuit
• 16. Engine
• 16.1. Engine
• 16.2. Check the engine oil level
• 16.3. Check the engine oil level
• 16.4. Change engine oil and oil filter cartridge
• 16.5. Change the fuel prefilter cartridge
• 16.6. Replace the fuel filter cartridge
• 16.7. Check, clean the water separator
• 16.8. Check the coolant level
• 16.9. Change the coolant
• 16.10. Service the combustion air filter
• 16.11. Service the combustion air filter
• 16.12. Check the dust separator
• 16.13. Cleaning the oil bath air filter
• 16.14. Adjust the valve clearance
• 16.15. Checking / replacing the ribbed Vbelt
• 16.16. Check the engine mounts
• 16.17. Replacing the crank case pressure ventilation valve
• 16.18. Engine conservation
• 17. Air conditioning system
• 17.1. Air conditioning system
• 17.2. Checking, replacing the refrigerant compressor Vbelt
• 17.3. Checking, replacing the refrigerant compressor Vbelt
• 17.4. Checking, replacing the refrigerant compressor Vbelt
• 17.5. Checking, replacing the refrigerant compressor Vbelt
• 17.6. Service the air conditioning
• 18. Drum
• 18.1. Drum
• 19. Circuit diagrams
• 19.1. Circuit diagrams
• 20.
• 20.1.