Bomag BW 80 AD-2, BW 90 AD-2, BW 100 ADM-2, BW 90 AC-2, BW 80 ADS Tandem Vibratory Roller Service Manual 00891460

Description

• Model List:
  • BW 80 AD-2 Tandem Vibratory Roller
  • BW 90 AD-2 Tandem Vibratory Roller
  • BW 100 ADM-2 Tandem Vibratory Roller
  • BW 90 AC-2 Tandem Vibratory Roller
  • BW 80 ADS Tandem Vibratory Roller

• 1. BW 80 AD2 / BW 90 AD2
• 1.1. BW 80 AD2 / BW 90 AD2
• 2. General
• 2.1. General
• 2.2. Introduction
• 2.3. General
• 2.4. General
• 2.5. Transport work with cranes and lifting tackle
• 2.6. Precautions and codes of conduct for welding work
• 2.7. Old oils
• 2.8. Hydraulics
• 2.9. Hot fuels
• 2.10. Synthetic rubber
• 2.11. Poisonous substances
• 2.12. Battery
• 2.13. Special safety regulations
• 2.14. The values specified in the table apply for screws
• 2.15. The values specified in the table apply for screws
• 2.16. The values specified in the table apply for screws
• 2.17. The values specified in the table apply for screws
• 2.18. The values specified in the table apply for screws
• 2.19. The values specified in the table apply for screws
• 2.20. The values specified in the table apply for screws
• 2.21. The values specified in the table apply for screws
• 2.22. The values specified in the table apply for screws
• 2.23. The values specified in the table apply for screws
• 2.24. The values specified in the table apply for screws
• 3. Technical data
• 3.1. Technical data
• 3.2.
• 3.3.
• 3.4.
• 3.5.
• 4. Maintenance
• 4.1. Maintenance
• 4.2. General notes on maintenance
• 4.3. Fuels and lubricants
• 5. Tests and adjustments
• 5.1. Tests and adjustments
• 5.2. Checking the rotation speeds
• 5.3. Checking the rotation speeds
• 5.4. Pressure tests in the travel circuit
• 5.5. Travel pump high pressure test
• 5.6. Pressure tests in the vibration circuit
• 5.7. Pressure test in steering circuit
• 6. Trouble shooting
• 6.1. Trouble shooting
• 7. Electrics
• 7.1. Electrics
• 8. Special tools, electrics
• 8.1. Special tools, electrics
• 9. Electronic modules
• 9.1. Electronic modules
• 10. Engine
• 10.1. Engine
• 10.2. Checking the coolant level
• 10.3. Checking the coolant level
• 10.4. Changing the coolant
• 10.5. Checking, cleaning, changing the dry air filter cartridge
• 10.6. Replacing the dry air filter cartridge
• 10.7. Checking the engine oil level
• 10.8. Changing the engine oil
• 10.9. Change the engine oil filter
• 10.10. Checking the condition, tension of the Vbelt, changing the Vbelt
• 10.11. Changing the main fuel filter
• 10.12. Changing the fuel precleaner, bleeding the fuel system
• 10.13. Cleaning the cooling fins on radiator and hydraulic oil cooler
• 10.14. Checking, adjusting the valve clearance
• 10.15. Checking the compression
• 10.16. Engine conservation
• 11. Hydraulics
• 11.1. Hydraulics
• 11.2. Check the hydraulic oil level
• 11.3. Check the hydraulic oil level
• 11.4. Check the hydraulic oil level
• 11.5. Check the hydraulic oil level
• 11.6. Changing the hydraulic oil
• 11.7. Checking the hydraulic oil filter element
• 11.8. Changing the hydraulic oil filter element
• 11.9. Checking the condition and tension of the toothed belt for the pump drive
• 11.10. Replacing the pump drive toothed belt
• 12. Flushing and bleeding
• 12.1. Flushing and bleeding
• 12.2. Special tools for flushing
• 13. Drum
• 13.1. Drum
• 14. Oscillating articulated joint
• 14.1. Oscillating articulated joint
• 15. Suppliers documentation
• 15.1. Suppliers documentation
• 16. Circuit diagrams
• 16.1. Circuit diagrams
• 17. Wiring diagram
• 17.1. Wiring diagram
• 17.2.
• 18. Wiring diagram
• 18.1. Wiring diagram
• 18.2.
• 19. Wiring diagram
• 19.1. Wiring diagram
• 19.2.
• 20. Wiring diagram
• 20.1. Wiring diagram
• 20.2.
• 21. Hydraulic diagram
• 21.1. Hydraulic diagram
• 22. Hydraulic diagram
• 22.1. Hydraulic diagram