Claas CORTO 270 S N NC (649) Mowers Operator Manual DE

Description

File List:

– CORTO 310 S 310 N, CORTO 270 S 270 NC 270 N 00 0188 406 9.pdf

CORTO 310 S 310 N, CORTO 270 S 270 NC 270 N 00 0188 406 9.pdf

Table of Content:
1 1 Introduction
1.1 Introduction
1.2 Validity
2 2 Content
3 3 Foreword
3.1 Particular attention should be paid to
3.2 Nameplate
4 4 For safety
4.1 Intended use
4.2 Reasonably foreseeable misuse
4.3 Decommissioning and disposal
4.4 Labeling of warning and danger notices
4.5 General safety and accident prevention regulations
4.6 Attached devices
4.7 Attached Devices
4.8 PTO operation
4.9 Hydraulic system
4.10 Tires
4.11 Maintenance
4.12 Sound pressure level
4.13 Safety sticker with warning symbols
5 5 Technical data
5.1 CORTO 310 S
5.2 CORTO 310 N
5.3 CORTO 270 S
5.4 CORTO 270 NC
5.5 CORTO 270 N
5.6 Calculate axle loads, minimum ballasting and total weight
5.7 Sound level
6 6 Assembly
6.1 Assembly CORTO 310 S / 310 N / 270 S / 270 N with swath device
6.2 Assembly CORTO 270 S with conditioner
6.3 Assembly CORTO 270 NC
6.4 Mower blade installation
6.5 Rope assembly
6.6 Hydraulics
6.7 Installing the machine for the first time
7 7 Before commissioning
7.1 Check and observe before commissioning
7.2 Append
7.3 Dismantling the machine
7.4 Before transport
8 8 Operation
8.1 Deployment
8.2 Additional equipment
9 9 Maintenance
9.1 Important maintenance instructions
9.2 Drives
9.3 Mower blades
9.4 Mower blade holder
9.5 Cutting height adjustment
9.6 Swath device
9.7 Conditioner
9.8 Hydraulics
9.9 Drive shaft
9.10 Screw connections
9.11 Fasteners
9.12 Wintering
10 10 Lubrication plan
10.1 For safety
10.2 Lubricants
10.3 Lubrication