Clark CQ 20, 25, 30 D, CQ 20, 25, 30 L Operator Manual OM-794

Description

• Model List:
  • CQ 20 D
  • CQ 25 D
  • CQ 30 D
  • CQ 20 L
  • CQ 25 L
  • CQ 30 L

• 1. Operators Manual
• 2. A Message to CLARK Lift Truck Operators
• 3. Contents of this Manual
• 4. Introduction
• 5. How to Use this Manual
• 6. Safety Signs and Safety Messages
• 7. Section 1 General Safety Rules
• 7.1. Daily Inspection
• 7.2. Dos and Donts
• 7.3. Seat Belts
• 7.4. No Riders
• 7.5. Pedestrians
• 7.6. Operator Protection
• 7.7. Fork Safety
• 7.8. Pinch Points
• 7.9. Grades, Ramps, Slopes, and Inclines
• 7.10. Surface and Capacity
• 7.11. TipOver
• 7.12. What to do in Case of a Tipover
• 7.13. Parking
• 7.14. General Tire Maintenance, Inspection, and Repair
• 7.15. Carbon monoxide and fumes
• 8. Section 2 Operating Hazards
• 8.1. Loose Loads
• 8.2. Long and Wide Loads / Rear Swing
• 8.3. Low Overhead Clearance Fast Turns and High Loads
• 8.4. DropOffs
• 8.5. RightAngle Stacking
• 8.6. Chain Slack
• 8.7. Pallets and Skids
• 9. Section 3 Operator Compartment and Controls
• 9.1. Truck Description
• 9.2. CQ 2030 Operator Compartment
• 9.3. CQ 2030 Instrument Panel
• 9.4. CQ 2030 Instrument Panel Symbols
• 9.5. Operator Controls
• 10. Section 4 Operating Procedures
• 10.1. Before Operating the Truck
• 10.2. Starting from a Safe Condition
• 11. Section 5 Operator Maintenance and Care
• 11.1. Daily Safety Inspection
• 11.2. Fuel Safety Practices
• 11.3. Refueling LPG Tanks
• 11.4. Refueling CNG Tanks
• 12. Section 6 Emergency Starting and Towing
• 12.1. How to Tow a Disabled Truck
• 12.2. How to Use Battery Jumper Cables
• 13. Section 7 Planned Maintenance and Lubrication
• 13.1. Introduction
• 13.2. Safe Maintenance Practices
• 13.3. Major Component Locations
• 13.4. Planned Maintenance Intervals
• 13.5. PM Report Form
• 13.6. How to Perform Planned Maintenance
• 14. Section 8 Specifications
• 14.1. CQ 2030
• 14.2. Engine Oil