Komatsu D40A-3, D40P-3, D41A-3, D41E-3, D41P-3, D41A-3A Bull Dozer Shop Manual SEBM0120C07
Komatsu D40A-3, D40P-3, D41A-3, D41E-3, D41P-3, D41A-3A Bull Dozer Shop Manual SEBM0120C07 - Image 2
Komatsu D40A-3, D40P-3, D41A-3, D41E-3, D41P-3, D41A-3A Bull Dozer Shop Manual SEBM0120C07 - Image 3
Komatsu D40A-3, D40P-3, D41A-3, D41E-3, D41P-3, D41A-3A Bull Dozer Shop Manual SEBM0120C07 - Image 4
Komatsu D40A-3, D40P-3, D41A-3, D41E-3, D41P-3, D41A-3A Bull Dozer Shop Manual SEBM0120C07 - Image 5

Komatsu D40A-3, D40P-3, D41A-3, D41E-3, D41P-3, D41A-3A Bull Dozer Shop Manual SEBM0120C07

$50.00

  • Type Of Manual: Shop Manual
  • Manual ID: SEBM0120C07
  • Format: PDF
  • Size: 96.9MB
  • Number of Pages: 556
Category:

Description

  • Model List:

    • D40A-3 Bull Dozer
    • D40P-3 Bull Dozer
    • D41A-3 Bull Dozer
    • D41E-3 Bull Dozer
    • D41P-3 Bull Dozer
    • D41A-3A Bull Dozer
  • 0.0.1. ASSEMBLY DRAWING
  • 0.0.2. SPECIFICATIONS
  • 0.0.3. ENGINE ASSEMBLY DRAWING
  • 0.0.4. ENGINE SPECIFICATIONS
  • 0.0.5. WEIGHT TABLE
  • 0.0.6. TABLE OF FUEL, COOLANT AND LUBRICANTS
  • 1. ENGINE
  • 1.1. STRUCTURE AND FUNCTION
  • 1.1.1. STRUCTURE AND FUNCTION
  • 1.1.1.1. RADIATOR AND OIL COOLER
  • 1.1.1.3. ENGINE CONTROL
  • 1.1.1.4. FUEL TANK
  • 1.1.1.5. ENGINE MOUNT
  • 1.2. TESTING AND ADJUSTING
  • 1.2.1. TESTING AND ADJUSTING
  • 1.2.1.1. STANDARD FOR INSPECTION, ADJUSTMENT AND TROUBLESHOOTING
  • 1.2.1.2. TOOLS FOR INSPECTION AND ADJUSTMENT
  • 1.2.1.3. TESTING AND ADJUSTING ENGINE
  • 1.2.1.4. INTAKE AND EXHAUST ENGINE SYSTEM
  • 1.2.1.5. ADJUSTING VALVE CLEARANCE
  • 1.2.1.6. ENGINE
  • 1.2.1.7. MEASURING COMPRESSION PRESSURE
  • 1.2.1.8. LUBRICATION SYSTEM
  • 1.2.1.9. FUEL SYSTEM
  • 1.2.1.10. TESTING AND ADJUSTING FUEL INJECTION TIMING
  • 1.2.1.11. COOLING SYSTEM
  • 1.2.1.12. CHECKING AND ADJUSTING FAN BELT TENSION
  • 1.3. DISASSEMBLY AND ASSEMBLY
  • 1.3.1. DISASSEMBLY AND ASSEMBLY
  • 1.3.1.1. ENGINE OIL COOLER
  • 1.3.1.2. FUEL INJECTION PUMP
  • 1.4. STRUCTURE AND FUNCTION
  • 1.4.1. STRUCTURE AND FUNCTION
  • 1.4.1.1. GENERAL
  • 1.4.1.2. POWER TRAIN HYDRAULIC SYSTEM (D413)
  • 1.4.1.3. MAIN CLUTCH (D403)
  • 1.4.1.4. MAIN CLUTCH CONTROL (D403)
  • 1.4.1.5. MAIN CLUTCH LUBRICATION (D403)
  • 1.4.1.6. INERTIA BRAKE (D403)
  • 1.4.1.7. TRANSMISSION (D403)
  • 1.4.1.8. INTERLOCK MECHANISM (D403)
  • 1.4.1.9. DOUBLE MESH PREVENTIVE DEVICE (D403)
  • 1.4.1.10. TRANSMISSION CONTROL (D403)
  • 1.4.1.11. DAMPER (D413)
  • 1.4.1.12. HYDROSHIFT TRANSMISSION (D413)
  • 1.4.1.13. TRANSMISSION LUBRICATION SYSTEM (D413)
  • 1.4.1.14. HYDROSHIFT TRANSMISSION CONTROL (D413)
  • 1.4.1.15. TRANSMISSION CONTROL VALVE (D413)
  • 1.4.1.16. INCHING VALVE AND CONTROL (D413)
  • 1.4.1.17. TRANSMISSION OIL FILTER
  • 1.4.1.18. OIL COOLER BYPASS VALVE
  • 1.4.1.19. STEERING HYDRAULIC OIL SYSTEM AND OIL CIRCUIT DIAGRAM
  • 1.4.1.20. STEERING PUMP
  • 1.4.1.21. STEERING CLUTCH AND BEVEL GEAR
  • 1.4.1.22. STEERING CONTROL VALVE
  • 1.4.1.23. STEERING MAIN RELIEF VALVE
  • 1.4.1.24. TRANSMISSION AND STEERING CLUTCH PIPING
  • 1.4.1.25. STEERING BRAKE
  • 1.4.1.26. STEERING CONTROL
  • 1.4.1.27. STEERING CLUTCH AND BRAKE CONTROL LINKAGE
  • 1.4.1.28. FINAL DRIVE
  • 1.5. TESTING AND ADJUSTING
  • 1.5.1. TESTING AND ADJUSTING
  • 1.5.1.1. MEASURING OIL PRESSURE AND TEMPERATURE
  • 1.5.1.2. TESTING AND ADJUSTING TRAVEL
  • 1.5.1.3. MEASURING OPERATING FORCE
  • 1.5.1.4. TESTING AND ADJUSTING MAIN CLUTCH
  • 1.5.1.5. STANDARD VALVE FOR TESTING AND ADJUSTING
  • 1.6. DISASSEMBLY AND ASSEMBLY
  • 1.6.1. DISASSEMBLY AND ASSEMBLY
  • 1.6.1.1. MAIN CLUTCH (D40)
  • 1.6.1.2. TRANSMISSION (D40)
  • 1.6.1.3. HYDROSHIFT TRANSMISSION (D41)
  • 1.6.1.4. TRANSMISSION CONTROL VALVE (D41)
  • 1.6.1.5. OIL COOLER BYPASS VALVE (D41)
  • 1.6.1.6. STEERING, WORK EQUIPMENT PUMP (D40)
  • 1.6.1.7. STEERING PUMP (D41)
  • 1.6.1.8. BEVEL GEAR AND SHAFT
  • 1.6.1.9. STEERING CLUTCH
  • 1.6.1.10. OIL COOLER RELIEF VALVE (D40)
  • 1.6.1.11. STEERING CONTROL VALVE
  • 1.6.1.12. FINAL DRIVE
  • 1.6.1.13. OPERATORS SEAT AND FRAME (D40)
  • 1.6.1.14. OPERATORS SEAT AND FRAME (D41)
  • 1.6.1.15. DASHBOARD (D40)
  • 1.7. MAINTENANCE STANDARD
  • 1.7.1. MAINTENANCE STANDARD
  • 1.7.1.1. MAIN CLUTCH
  • 1.7.1.2. INERCIA BRAKE
  • 1.7.1.3. TRANSMISSION
  • 1.7.1.4. DAMPER
  • 1.7.1.5. HYDROSHIFT TRANSMISSION
  • 1.7.1.6. TRANSMISSION CONTROL VALVE
  • 1.7.1.7. OIL COOLER BYPASS VALVE
  • 1.7.1.8. BEVEL GEAR SHAFT
  • 1.7.1.9. STEERING CLUTCH
  • 1.7.1.10. STEERING BRAKE
  • 1.7.1.11. STEERING MAIN RELIEF VALVE
  • 1.7.1.12. STEERING CONTROL VALVE
  • 1.7.1.13. STEERING PUMP
  • 1.7.1.14. FINAL DRIVE
  • 1.7.1.15. SPROCKET
  • 2. UNDERCARRIAGE
  • 2.1. STRUCTURE AND FUNCTION
  • 2.1.1. STRUCTURE AND FUNCTION
  • 2.1.1.1. TRACK (SWANP SHOE)
  • 2.1.1.2. SUSPENSION
  • 2.2. DISASSEMBLY AND ASSEMBLY
  • 2.2.1. DISASSEMBLY AND ASSEMBLY
  • 2.2.1.1. TRACK FRAME
  • 2.2.1.2. RECOIL SPRING
  • 2.3. MAINTENANCE STANDARD
  • 2.3.1. MAINTENANCE STANDARD
  • 2.3.1.1. TRACK
  • 2.3.1.2. TRACK (SWANP SHOE)
  • 2.3.1.3. TRACK FRAME
  • 2.3.1.4. RECOIL SPRING
  • 2.3.1.5. IDLER
  • 2.3.1.6. BEARING, GUIDE PLATE
  • 2.3.1.7. CARRIER ROLLER
  • 2.3.1.8. TRACK ROLLER
  • 2.3.1.9. MEASURING PROCEDURE OF ROLLERS
  • 2.3.1.10. SUSPENTION
  • 3. HYDRAULIC SYSTEM
  • 3.1. STRUCTURE AND FUNCTION
  • 3.1.1. STRUCTURE AND FUNCTION
  • 3.1.1.1. GENERAL
  • 3.1.1.2. HYDRAULIC CONTROL SYSTEM (D40P3,D41E,P3)
  • 3.1.1.3. HYDRAULIC CIRCUIT DIAGRAM (D40P3,D41E,P3)
  • 3.1.1.4. HYDRAULIC CONTROL SYSTEM (D41A3A)
  • 3.1.1.5. HYDRAULIC CIRCUIT DIAGRAM (D41A3A)
  • 3.1.1.6. HYDRAULIC TANK AND FILTER
  • 3.1.1.7. HYDRAULIC CONTROL
  • 3.1.1.8. HYDRAULIC PUMP
  • 3.1.1.9. BLADE CONTROL VALVE
  • 3.1.1.10. BLADE LIFT CONTROL
  • 3.1.1.11. BLADE TILT CONTROL
  • 3.1.1.12. BLADE LIFT CYLINDER
  • 3.1.1.13. BLADE TILT CYLINDER
  • 3.1.1.14. BLADE ANGLING CYLINDER
  • 3.1.1.15. HYDRAULIC CYLINDER
  • 3.2. TESTING AND ADJUSTING
  • 3.2.1. TESTING AND ADJUSTING
  • 3.2.1.1. PERFORMANCE OF HYDRAULIC PUMP
  • 3.2.1.2. TESTING AND ADJUSTING HYDRAULIC PRESSURE OF WORK EQUIPMENT
  • 3.2.1.3. MEASURING TEMPERATURE OF HYDRAULIC OIL
  • 3.2.1.4. TESTING AND ADJUSTING TRAVEL AND OPERATING FORCE OF WORK EQUIPMENT CONTROL LEVERS
  • 3.2.1.5. MEASURING HYDRAULIC DRIFT
  • 3.2.1.6. STANDARD VALUE FOR TESTING AND ADJUSTING
  • 3.3. DISASSEMBLY AND ASSEMBLY
  • 3.3.1. DISASSEMBLY AND ASSEMBLY
  • 3.3.1.1. HYDRAULIC PUMP (D41)
  • 3.3.1.2. WORK EQUIPMENT CONTROL VALVE
  • 3.3.1.3. BLADE LIFT CYLINDER
  • 3.3.1.4. BLADE TILT CYLINDER (D40,41P)
  • 3.3.1.5. BLADE LIFT CYLINDER
  • 3.3.1.6. BLADE TILT CYLINDER (D40,41P)
  • 3.4. MAINTENANCE STANDARD
  • 3.4.1. MAINTENANCE STANDARD
  • 3.4.1.1. CONTROL VALVE
  • 3.4.1.2. BLADE CONTROL VALVE
  • 3.4.1.3. LIFT CYLINDER
  • 3.4.1.4. TILT CYLINDER
  • 3.4.1.5. ANGLING CYLINDER
  • 3.4.1.6. HYDRAULIC PUMP
  • 4. WORK EQUIPMENT
  • 4.1. STRUCTURE AND FUNCTION
  • 4.1.1. STRUCTURE AND FUNCTION
  • 4.1.1.1. ANGLEDOZER
  • 4.1.1.2. STRAIGHTTILTDOZER
  • 4.1.1.3. POWER ANGLE TILTDOZER
  • 4.2. DISASSEMBLY AND ASSEMBLY
  • 4.2.1. DISASSEMBLY AND ASSEMBLY
  • 4.2.1.1. ANGLE DOZER (D40,41A)
  • 4.2.1.2. STRAIGHTTILTDOZER (D40,41P)
  • 4.3. MAINTENANCE STANDARD
  • 4.3.1. MAINTENANCE STANDARD
  • 4.3.1.1. WORK EQUIPMENT
  • 5. OTHERS
  • 5.1. ELECTRICAL SYSTEM
  • 5.1.1. ELECTRICAL SYSTEM
  • 5.1.1.1. ELECTRICAL CIRCUIT DIAGRAM
Rate this product
Reviews

There are no reviews yet.

Be the first to review “Komatsu D40A-3, D40P-3, D41A-3, D41E-3, D41P-3, D41A-3A Bull Dozer Shop Manual SEBM0120C07”

Your email address will not be published. Required fields are marked *

Related products