Komatsu D55S-3 Dozer Shovel Shop Manual D55S.3-BE2

Description

• Model List:
  • D55S-3 Dozer Shovel

• 1. GENEARAL INSTRUTIONS
• 1.1. INSTRUCTIONS FOR DISASSEMBLING WORK
• 1.2. INSTRUCTIONS FOR REASSEMBLING WORK
• 1.3. INSTRUCTIONS FOR ADJUSTING WORK
• 1.4. INSTRUCTIONS FOR USE OF HAND TOOLS
• 1.5. INSTRUCTIONS FOR HANDLING BEARINGS IN DISASSEMBLING/REASSEMBLING WORK
• 1.6. INSTRUCTIONS FOR HANDLING OIL SEALS
• 1.7. INSTRUCTIONS FOR HANDLING SNAP RINGS
• 1.8. INSTRUCTIONS FOR HANDLING GASKETS AND PACKINGS
• 1.9. WEIGHTS OF MAJOR ASSEMBLIES
• 1.10. TORQUE LIMIT CHART
• 2. TORQUE CONVERTER
• 3. TORQUE TRANSMISSION
• 3.1. DESCRIPTION
• 3.1.1. POWER TRANSMITTING GROUP
• 3.1.1.1. OPERATING PRINCIPLE OF THE PLANETARY GEARING
• 3.1.1.2. CONSTRUCTION AND FUNCTION
• 3.1.1.3. SELECTIVE PATHS OF POWER THROUGH TRANSMISSION
• 3.2. REMOVAL
• 3.3. DISASSEMBLING
• 3.4. CLEANING AND INSPECTION
• 3.5. ASSEMBLING
• 3.6. INSTALLATION
• 3.7. CONTROL VALVE
• 3.7.1. DESCRIPTION
• 3.7.1.1. VALVE FUNCTION
• 3.7.1.2. HYDRAULIC OIL FLOWS
• 3.7.1.3. TORQUE CONVERTER INLET RELIEF VALVE
• 3.7.1.4. TRANSMISSION LUBRICATION RELIEF VALVE
• 3.8. DISASSEMBLING
• 3.9. CLEANING AND INSPECTION
• 4. RANGE TRANSMISSION
• 4.1. DESCRIPTION
• 4.1.1. CONSTRUCTION OF RANGE TRANSMISSION
• 4.1.2. SHIFTER FORK
• 4.1.3. INTERLOCK
• 4.2. REMOVAL
• 4.3. DISASSEMBLING
• 4.4. CLEANING AND INSPECTION
• 4.5. ASSEMBLING
• 4.6. INSTALLATION
• 4.7. RANGE TRANSMISSION SHIFTER
• 4.7.1. REMOVAL
• 4.7.2. DISASSEMBLING
• 4.7.3. CLEANING AND INSPECTION
• 4.7.4. ASSEMBLING
• 4.7.5. INSTALLATION
• 5. BEVEL GEAR AND BEVEL GEAR SHAFT
• 5.1. DESCRIPTION
• 5.2. REMOVAL
• 5.3. DISASSEMBLING
• 5.4. CLEANING AND INSPECTION
• 5.5. ASSEMBLING
• 5.6. INSTALLATION
• 5.7. ADJUSTMENT
• 5.8. TOOTH CONTACT ADJUSTMENT
• 6. STEERING SYSTEM
• 6.1. STEERING CLUTCHES AND BRAKES
• 6.1.1. DESCRIPTION
• 6.1.1.1. STEERING CLUTCHES
• 6.1.1.2. STEERING BRAKES
• 6.1.2. REMOVAL
• 6.1.3. DISASSEMBLING
• 6.1.4. CLEANING AND INSPECTION
• 6.1.5. ASSEMBLING
• 6.1.6. INSTALLATION
• 6.1.7. ADJUSTMENT
• 6.2. STEERING CONTROL VALVE
• 6.2.1. DESCRIPTION
• 6.2.2. REMOVAL
• 6.2.3. DISASSEMBLING
• 6.2.4. CLEANING AND INSPECTION
• 6.3. CLEANING AND INSPECTION
• 6.3.1. CLEANING AND INSPECTION
• 6.3.2. CLEANING AND INSPECTION
• 6.3.3. CLEANING AND INSPECTION
• 6.4. CLEANING AND INSPECTION
• 6.5. ASSEMBLING
• 7. ELECTRICAL EQUIPMENT
• 7.1. ELECTRICAL EQUIPMENT
• 8. DOZER GROUP
• 8.1. DESCRIPTION
• 8.1.1. SAFETY DEVICE FOR SHOVEL ATTACHMENT
• 8.1.2. KICKOUT ADJUSTMENT
• 8.1.3. POSITION ADJUSTMENT
• 9. HYDRAULIC SYSTEM
• 9.0.1. CLEANING AND INSPECTION
• 9.0.2. INSTALLATION
• 9.0.3. ADJUSTMENT FOR HYDRAULIC PRESSURE
• 9.1. HYDRAULIC PUMP
• 9.1.1. DESCRIPTION
• 9.2. HYDRAULIC FILTER
• 9.2.1. DESCRIPTION
• 9.2.2. REMOVAL
• 9.2.3. DISASSEMBLING
• 9.2.4. CLEANING AND INSPECTION
• 9.2.5. CLEAN AND INSPECTION
• 10. MAINTENANCE STANDARDS
• 10.1. MAINTENANCE STANDARDS