Komatsu SK1026-5N Skid Steer Loader Shop Manual CEBM014201

Description

• Model List:
  • SK1026-5N Skid Steer Loader

• 1. COVER
• 2. CONTENTS
• 3. FOREWORD
• 3.1. List of Revised Pages
• 3.2. SAFETY
• 3.3. GENERAL
• 3.4. HOW TO READ THE SHOP MANUAL
• 3.5. HOISTING INSTRUCTIONS
• 3.6. PUSH PULL COUPLER
• 3.7. COATING MATERIALS
• 3.8. STANDARD TIGHTENING TORQUE
• 3.9. ELECTRIC WIRE CODE
• 3.10. CONVERSION TABLES
• 4. GENERAL
• 4.1. TECHNICAL DATA
• 4.2. WEIGHT TABLE
• 4.3. FUEL, COOLANT AND LUBRICANTS
• 4.4. HOMOLOGATED (HEES) SYNTHETIC BIODEGRADABLE LUBRICANTS
• 4.5. SPECIFIC DRIVING TORQUES
• 5. STRUCTURE, FUNCTION AND MAINTENANCE STANDARD
• 5.2. POWER TRAIN
• 5.3. TRANSMISSION
• 5.4. FINAL DRIVE
• 5.5. HYDRAULIC PUMP
• 5.6. SAFETY VALVES
• 5.7. ANTI ENGINESTALL VALVE (AS VALVE)
• 5.8. CONTROL VALVES
• 5.9. CLOSED CENTER LOAD SENSING SYSTEM
• 5.10. SOLENOID VALVE
• 5.11. ACCUMULATOR
• 5.12. PARTERN CHANGE VALVE
• 5.13. PPC VALVE (STANDARD)
• 5.14. PPC VALVE (PATTERN CHANGE) (OPTIONAL)
• 5.15. PPC VALVE (STANDARD)
• 5.16. PPC VALVE (PATTERN CHANGE)
• 5.17. CYLINDERS
• 5.18. WORKING EQUIPMENT
• 6. STANDARD VALUE TABLES
• 6.1. STANDARD SERVICE VALUE TABLE
• 7. TESTING AND ADJUSTING
• 7.1. SPECIAL TOOLS
• 7.2. TADAPTER PROCEDURES AND KITS
• 7.3. ENGINE COMPONENTS
• 7.4. ADJUSTING PPC VALVE PRESSURES
• 7.5. ADJUSTING SERVOCONTROL SAFETY SENSOR
• 7.6. CHAIN TENSION
• 7.7. HYDRAULIC SYSTEM
• 7.8. HYDRAULIC PUMP
• 7.9. CALIBRATING VALVE
• 7.10. CONTROL VALVE
• 7.11. SERVOCONTROL POWER SUPPLY
• 7.12. RELEAVING HYDRAULIC PRESSURE
• 7.13. BLEEDING HYDRAULIC CIRCUITS
• 8. TROUBLESHOOTING
• 8.1. POINTS TO REMEMBER WHEN TROUBLESHOOTING
• 8.2. SEQUENCE OF EVENTS IN TROUBLESHOOTING
• 8.3. PRECAUTIONS WHEN PERFORMING MAINTENANCE
• 8.4. CHECKS BEFORE TROUBLESHOOTING
• 8.5. CONNECTION TABLE FOR CONNECTOR PIN NUMBERS
• 8.6. TADAPTER TABLE
• 8.7. TRAVEL MOTOR
• 8.8. AIR CONDITIONING SYSTEM
• 9. DISASSEMBLY AND ASSEMBLY
• 9.1. HOW TO READ THIS SECTION
• 9.2. PRECAUTIONS DURING OPERATION
• 9.3. CONNECTOR REPAIR PROCEDURES
• 9.4. ENGINE
• 9.5. ENGINE HOOD ASSEMBLY
• 9.6. OPERATORS CAB ASSEMBLY
• 9.7. BATTERY
• 9.8. AIR CLEANER ASSEMBLY
• 9.9. MUFFLER ASSEMBLY
• 9.10. RADIATOR ASSEMBLY
• 9.11. FUEL TANK ASSEMBLY
• 9.12. HYDRAULIC PUMP ASSEMBLY
• 9.13. GEAR PUMP ASSEMBLY
• 9.14. ENGINEPUMP COUPLING
• 9.15. CAB HEATER ASSEMBLY
• 9.16. WHEEL HUB ASSEMBLY
• 9.17. FINAL DRIVE ASSEMBLY
• 9.18. CYLINDER ASSEMBLIES
• 9.19. WORK EQUIPMENT SYSTEM
• 10. DIAGRAMS AND SCHEMATICS
• 10.1. HYDRAULIC SYSTEM
• 10.2. ELECTRICAL SYSTEM