Description
-
Model List:
- WA600-3 Wheel Loader
- 1. COVER
- 2. CONTENTS
- 3. DRAWINGS OF UNITS DIVIDED FOR DELIVERY
- 4. WEIGHT AND DIMENSIONS TABLE OF UNITS DIVIDED FOR DELIVERY
- 5. ASSEMBLY WORK SCHEDULE
- 6. NECESSARY DEVICES AND TOOLS
- 7. ASSEMBLY PROCEDURE
- 7.1. INSTALLATION OF TIRE AND WHEEL ASSEMBLY
- 7.1.1. Positioning of vehicle
- 7.1.2. Removal of axle stand
- 7.1.3. Slinging of tire and wheel assembly
- 7.1.4. Installation of tire and wheel assembly
- 7.2. INSTALLATION OF MUFFLER STACK
- 7.3. INSTALLATION OF CAB ASSEMBLY
- 7.3.1. Removal of floor frame undercovers
- 7.3.2. Removal of cover in cab assembly
- 7.3.3. Slinging of cab assembly
- 7.3.4. Loosening of steering post lower bolt
- 7.3.5. Operation of steering tilt lever
- 7.3.6. Installation of seal
- 7.3.7. Lowering of cab assembly
- 7.3.8. Temporary tightening of steering post fixing bolts
- 7.3.9. Temporary tightening of cab assembly mounting bolts
- 7.3.10. Permanent tightening of steering post lower bolt
- 7.3.11. Permanent tightening of steering post fixing bolt
- 7.3.12. Connection of wiring connectors and washer vinyl tubes
- 7.3.13. Installation of troubleshooting switch
- 7.3.14. Installation of cover in cab assembly
- 7.3.15. Installation of steering post lower bellows
- 7.3.16. Installation of cab assembly righthand cover
- 7.3.17. Installation of floor frame lower cover
- 7.3.18. Installation of mirrors and mirror stays
- 7.4. INSTALLATION OF ROPS CANOPY
- 7.4.1. Removal of antenna
- 7.4.2. Removal of rear frame ROPS support bolts tightened temporarily
- 7.4.3. Slinging of ROPS canopy
- 7.4.4. Installation of ROPS canopy
- 7.4.5. Installation of antenna to ROPS canopy
- 7.4.6. Installation of antennal wire hole grommet
- 7.5. INSTALLATION OF BUCKET
- 7.5.1. Installation of cord ring
- 7.5.2. Aligning of bucket assembly and hinge pin holes
- 7.5.3. Selection of shim for bucket hinge pin
- 7.5.4. Insertion of bucket hinge pin
- 7.5.5. Installation of bucket hinge pin stopper
- 7.5.6. Installation of bucket hinge pin and retainer
- 7.5.7. Lowering of cord ring to groove
- 7.5.8. Installation of bucket link pin
- 7.5.9. Installation of grease nipple and plug
- 7.5.10. Measurement of steering wheel operating effort
- 8. Field assembly inspection report
There are no reviews yet.