Description
-
Model List:
- WA600-6R Wheel Loader
- 1. COVER
- 2. FOREWORD
- 2.1. READ THIS MANUAL
- 2.2. SAFETY INFORMATION
- 2.3. INTRODUCTION
- 2.3.1. USE OF MACHINE
- 2.3.2. FRONT/REAR, LEFT/RIGHT DIRECTIONS OF MACHINE
- 2.3.3. VISIBILITY FROM OPERATORS SEAT
- 2.4. NECESSARY INFORMATION
- 2.4.1. PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO. PLATE
- 2.4.2. ENGINE SERIAL NO. PLATE AND POSITION
- 2.4.3. POSITION OF SERVICE METER
- 2.4.4. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
- 2.5. CONTENTS
- 3. SAFETY
- 3.1. SAFETY
- 3.2. SAFETY LABELS
- 3.2.1. LOCATION OF SAFETY LABELS
- 3.2.2. SAFETY LABELS
- 3.3. GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE
- 3.3.1. PRECAUTIONS BEFORE STARTING OPERATION
- 3.3.2. PREPARATIONS FOR SAFE OPERATION
- 3.3.3. FIRE PREVENTION
- 3.3.4. PRECAUTIONS WHEN GETTING ON OR OFF MACHINE
- 3.3.5. DO NOT GET CAUGHT IN ARTICULATING PORTION
- 3.3.6. PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES
- 3.3.7. UNAUTHORIZED MODIFICATION
- 3.3.8. PRECAUTIONS RELATED TO ATTACHMENTS AND OPTIONS
- 3.3.9. PRECAUTIONS WHEN RUNNING ENGINE INSIDE BUILDING
- 3.4. PRECAUTIONS FOR OPERATION
- 3.4.1. PRECAUTIONS FOR JOBSITE
- 3.4.2. STARTING ENGINE
- 3.4.3. OPERATION
- 3.4.4. TRANSPORTATION
- 3.4.5. TOWING
- 3.5. PRECAUTIONS FOR MAINTENANCE
- 3.5.1. PRECAUTIONS BEFORE STARTING INSPECTION AND MAINTENANCE
- 3.5.2. PRECAUTIONS FOR INSPECTION AND MAINTENANCE
- 3.5.3. TIRES
- 4. OPERATION
- 4.1. GENERAL VIEW
- 4.1.1. GENERAL VIEW OF MACHINE
- 4.1.2. GENERAL VIEW OF CONTROLS AND GAUGES
- 4.2. EXPLANATION OF COMPONENTS
- 4.2.1. MACHINE MONITOR
- 4.2.2. SWITCHES
- 4.2.3. CONTROL LEVERS, PEDALS
- 4.2.4. STEERING COLUMN TILT LEVER
- 4.2.5. CAP WITH LOCK
- 4.2.6. FRAME LOCK BAR
- 4.2.7. TOWING PIN
- 4.2.8. BACKUP ALARM
- 4.2.9. OPENING, CLOSING CAB DOORS, WINDOWS
- 4.2.10. HANDLING CAB WIPER
- 4.2.11. DUST INDICATOR
- 4.2.12. FUSE
- 4.2.13. CIRCUIT BREAKER
- 4.2.14. SLOW BLOW FUSE
- 4.2.15. LUNCH BOX TRAY
- 4.2.16. TOOL BOX
- 4.2.17. GREASE PUMP
- 4.2.18. LOCATION OF FIRE EXTINGUISHER
- 4.2.19. POWER OUTLET
- 4.2.20. CAR RADIO
- 4.2.21. AM/FM RADIOCASSETTE STEREO
- 4.2.22. AIR CONDITIONER
- 4.3. OPERATION
- 4.3.1. CHECK BEFORE STARTING ENGINE, ADJUST
- 4.3.2. STARTING ENGINE
- 4.3.3. OPERATIONS AND CHECKS AFTER STARTING ENGINE
- 4.3.4. STOPPING ENGINE
- 4.3.5. CHECK AFTER STOPPING ENGINE
- 4.3.6. MOVING THE MACHINE (DIRECTIONAL, SPEED), STOPPING THE MACHINE
- 4.3.7. TURNING
- 4.3.8. OPERATION OF WORK EQUIPMENT
- 4.3.9. SEMI AUTO DIGGING OPERATIONS
- 4.3.10. REMOTE POSITIONER
- 4.3.11. WORK POSSIBLE USING WHEEL LOADER
- 4.3.12. PRECAUTIONS FOR OPERATION
- 4.3.13. REMOVAL AND INSTALLATION OF THE BUCKET
- 4.3.14. PARKING MACHINE
- 4.3.15. CHECKS AFTER COMPLETION OF OPERATION
- 4.3.16. LOCKING
- 4.3.17. HANDLING THE TIRES
- 4.4. TRANSPORTATION
- 4.4.1. TRANSPORTATION PROCEDURE
- 4.4.2. LOADING, UNLOADING WORK
- 4.4.3. METHOD OF SECURING MACHINE
- 4.4.4. METHOD OF LIFTING MACHINE
- 4.4.5. PRECAUTIONS WHEN DISASSEMBLY OR REASSEMBLING WORK EQUIPMENT
- 4.5. COLD WEATHER OPERATION
- 4.5.1. PRECAUTIONS FOR LOW TEMPERATURE
- 4.5.2. PRECAUTIONS AFTER COMPLETION OF WORK
- 4.5.3. AFTER COLD WEATHER
- 4.5.4. WARMINGUP OPERATION FOR STEERING HYDRAULIC CIRCUIT IN COLD WEATHER
- 4.6. LONGTERM STORAGE
- 4.6.1. BEFORE STORAGE
- 4.6.2. DURING STORAGE
- 4.6.3. AFTER STORAGE
- 4.7. TROUBLESHOOTING
- 4.7.1. WHEN MACHINE RUNS OUT OF FUEL
- 4.7.2. METHOD OF TOWING MACHINE
- 4.7.3. IF BATTERY IS DISCHARGED
- 4.7.4. METHOD FOR LOWERING WORK EQUIPMENT WHEN ENGINE HAS STOPPED
- 4.7.5. OTHER TROUBLE
- 5. MAINTENANCE
- 5.1. GUIDES TO MAINTENANCE
- 5.2. OUTLINES OF SERVICE
- 5.2.1. HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
- 5.2.2. OUTLINE OF ELECTRIC SYSTEM
- 5.3. WEAR PARTS
- 5.3.1. WEAR PARTS LIST
- 5.4. RECOMMENDED FUEL, COOLANT, AND LUBRICANT
- 5.4.1. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
- 5.4.2. RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL
- 5.5. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
- 5.5.1. TORQUE LIST
- 5.6. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
- 5.6.1. SAFETY CRITICAL PARTS
- 5.7. MAINTENANCE SCHEDULE CHART
- 5.7.1. MAINTENANCE SCHEDULE CHART
- 5.7.2. MAINTENANCE INTERVAL WHEN DIESEL FUEL MIXED WITH BIOFUEL IS USED
- 5.8. SERVICE PROCEDURE
- 5.8.1. EVERY 10 HOURS SERVICE (ONLY FOR FIRST 50 HOURS)
- 5.8.2. INITIAL 250 HOURS SERVICE
- 5.8.3. WHEN REQUIRED
- 5.8.4. CHECK BEFORE STARTING
- 5.8.5. EVERY 50 HOURS SERVICE
- 5.8.6. EVERY 100 HOURS SERVICE
- 5.8.7. EVERY 250 HOURS SERVICE
- 5.8.8. EVERY 500 HOURS SERVICE
- 5.8.9. EVERY 1000 HOURS SERVICE
- 5.8.10. EVERY 2000 HOURS SERVICE
- 5.8.11. EVERY 4000 HOURS SERVICE
- 5.8.12. EVERY 8000 HOURS SERVICE
- 6. SPECIFICATIONS
- 6.1. SPECIFICATIONS
- 7. ATTACHMENTS, OPTIONS
- 7.1. HANDLING AJSS (ADVANCED JOYSTICK STEERING SYSTEM)
- 7.1.1. EXPLANATION OF COMPONENTS
- 7.1.2. FUNCTION AND STRUCTURE OF AJSS
- 7.1.3. WHEN REQUIRED
- 7.2. SELECTING BUCKET AND TIRES
- 7.3. STARTING IN COLD AREAS
- 7.3.1. ELECTRIC HEATER
- 7.4. HANDLING LOAD METER
- 7.4.1. OUTLINE OF LOAD METER
- 7.4.2. PRINCIPLE OF LOAD METER MEASUREMENT
- 7.4.3. POINTS TO REMEMBER TO ENSURE HIGH ACCURACY
- 7.4.4. USING LOAD METER
- 7.5. HANDLING AUTOGREASING SYSTEM
- 7.5.1. METHOD OF OPERATING AUTOGREASING SYSTEM
- 7.5.2. PRECAUTIONS WHEN HANDLING AUTOGREASING SYSTEM
- 7.5.3. TROUBLESHOOTING
- 7.6. HANDLING QUICK COUPLER CONTROL SYSTEM
- 7.6.1. EXPLANATION OF COMPONENTS
- 7.6.2. FUNCTION AND METHOD OF OPERATION OF QUICK COUPLER SWITCH
- 7.6.3. METHOD OF REMOVING AND INSTALLING ATTACHMENT
- 7.6.4. INSPECTION AND MAINTENANCE
- 7.6.5. METHOD OF TURNING BOTTOM FRONT WORKING LAMP ON/OFF
- 7.7. HANDLING BATTERY DISCONNECT SWITCH
- 7.8. HANDLING STARTING AID CONNECTOR
- 7.9. HANDLING REAR FENDER
- 7.9.1. HANDLING
- 7.10. METHOD OF USING 3 LEVERS
- 7.10.1. EXPLANATION OF COMPONENTS
- 7.11. HANDLING MACHINES EQUIPPED WITH KOMTRAX Plus
- 7.11.1. KOMTRAX Plus INSTALLED, COMMUNICATIONS TERMINAL NOT INSTALLED
- 7.11.2. KOMTRAX Plus AND COMMUNICATIONS TERMINAL INSTALLED
- 8. INDEX
There are no reviews yet.