Linde 115-03 – R14G, R16G, R20G Operating Instructions SN 10.07 and up SN up to 12.09

Description

• Model List:
  • R14G
  • R16G
  • R20G

• 1. Electric reach truckR14G03, R16G03, R20G03
• 1.1. Table of content
• 1.2. Introduction and general description
• 1.2.1. Introduction
• 1.2.2. Legal requirements for marketing
• 1.2.3. General description
• 1.3. Safety
• 1.3.1. Operator safety guidelines
• 1.3.2. Residual risks
• 1.3.3. Stability
• 1.3.4. In the event of tipover
• 1.3.5. Noise emission levels
• 1.3.6. Frequency characteristic for human body vibrations
• 1.4. Getting to know the truck
• 1.4.1. Location of identification plates and labels
• 1.4.2. Truck type.capacity plate
• 1.4.3. General view of truck
• 1.4.4. Operating controls and indicators
• 1.4.5. Operators display
• 1.4.6. Definition of direction of travel
• 1.5. Operation
• 1.5.1. Runningin instructions
• 1.5.2. Preshift checks
• 1.5.2.1. Preshift
• 1.5.2.2. Check the battery state of charge
• 1.5.2.3. Check all controls and their operation
• 1.5.2.4. Check all Interlock switches
• 1.5.2.5. Check general condition of truck
• 1.5.3. The battery
• 1.5.4. Operator adjustments
• 1.5.5. Braking twin pedal
• 1.5.6. Braking single pedal
• 1.5.7. Driving twin pedal
• 1.5.8. Driving single pedal
• 1.5.9. Travelling on an incline
• 1.5.10. Operating the mast and attachments (with two joystick control)
• 1.5.11. Operating the mast and attachments (with four joystick control)
• 1.5.12. Handling loads
• 1.5.13. Before leaving the truck
• 1.5.14. Opposite direction steering (Option)
• 1.5.15. Operator code entry (Option)
• 1.5.16. Data Logger (Option)
• 1.5.17. Truck data management LFM (Option)
• 1.5.18. Ambient temperature cabin
• 1.6. Maintenance
• 1.6.1. Maintenance safety guidelines
• 1.6.2. Report of Thorough Examination
• 1.6.3. Covers and cowlings
• 1.6.4. Fuses
• 1.6.5. Emergency lower
• 1.6.6. Emergency steering and parking brake release
• 1.6.7. Slinging the truck
• 1.6.8. Securing for transportation
• 1.6.9. Jacking the truck
• 1.6.10. Towing procedure
• 1.6.11. Mast unit
• 1.6.12. Recommended lubricants
• 1.6.13. Inspection and maintenance data
• 1.6.14. Routine inspection and maintenance
• 1.6.15. Service plans
• 1.6.15.1. As required
• 1.6.15.2. h Service plan
• 1.6.15.3. h Service plan
• 1.6.15.4. h Service plan
• 1.6.15.5. h Service plan
• 1.6.15.6. h Service plan
• 1.6.16. Motor
• 1.6.16.1. Check the parking brake gap
• 1.6.17. Axles
• 1.6.17.1. Check the drive unit suspension system
• 1.6.18. Chassis, bodywork and fittings
• 1.6.18.1. Clean the truck
• 1.6.18.2. Check and lubricate the battery trolley slides and associated mechanism
• 1.6.19. Undercarriage
• 1.6.19.1. Check the condition and security of the wheels and tyres
• 1.6.19.2. Check the brake fluid level
• 1.6.19.3. Check the load wheel brake shoes for wear
• 1.6.19.4. Grease the load wheel bearings
• 1.6.19.5. Change the brake fluid
• 1.6.19.6. Check condition of brake pipes
• 1.6.20. Controls
• 1.6.20.1. Check all controls and their operation
• 1.6.21. Electrical . Electronic
• 1.6.21.1. Check the condition of the battery and battery cables
• 1.6.21.2. Check the battery electrolyte level and specific gravity
• 1.6.21.3. Check the condition and security of electrical connections and cables
• 1.6.22. Hydraulic installation
• 1.6.22.1. Check the hydraulic hoses and pipes for damage
• 1.6.22.2. Check the hydraulic oil level
• 1.6.22.3. Replace the hydraulic tank breather filter
• 1.6.22.4. Change the hydraulic fluid
• 1.6.22.5. Replace the hydraulic suction line filter
• 1.6.23. Load lift system
• 1.6.23.1. Adjust the lift chains
• 1.6.23.2. Check the lift chains for condition and security
• 1.6.23.3. Lubricate the mast, lift chains and chain pulleys
• 1.6.23.4. Lubricate the reach channels and rollers
• 1.6.23.5. Check the reach carriage rollers, adjust if required
• 1.6.23.6. Check and lubricate the fork carriage
• 1.6.23.7. Check and lubricate the sideshift mechanism
• 1.6.23.8. Lubricate the mast pivots
• 1.6.24. Special equipment and accessories
• 1.6.24.1. Top up the screen wash reservoir (option)
• 1.6.24.2. Lubricate the cabin hinges and door latch (option)
• 1.6.25. Taking the truck out of operation
• 1.6.26. Decommissioning the truck
• 1.7. Technical data
• 1.7.1. Battery data
• 1.7.2. Dimensions
• 1.7.3. Technical data 1.4 tonne capacity
• 1.7.4. Technical data 1.6 tonne capacity
• 1.7.5. Technical data 2.0 tonne capacity
• 1.7.6. Mast variations
• 1.8. Circuit diagrams
• 1.8.1. Circuit Diagram (1 of 4)
• 1.8.2. Circuit Diagram (2 of 4)
• 1.8.3. Circuit Diagram (3 of 4)
• 1.8.4. Circuit Diagram (4 of 4)
• 1.8.5. Circuit diagram (Standard) keycode
• 1.8.6. Circuit Diagram variable electric brake (1 of 4)
• 1.8.7. Circuit Diagram variable electric brake (2 of 4)
• 1.8.8. Circuit Diagram variable electric brake (3 of 4)
• 1.8.9. Circuit Diagram variable electric brake (4 of 4)
• 1.8.10. Circuit diagram (Variable electric brake) keycode
• 1.8.11. Hydraulic circuit
• 1.8.12. Hydraulic circuit keycode