Linde 1151-02 – T16P, T20P Production site Xiamen Operating Instructions SN C11151F50001 and up

Description

• Model List:
  • T16P
  • T20P

• 1. Electric Pallet TruckT16P02T20P02
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Introduction
• 1.2.2. General information
• 1.2.3. Conformity marking
• 1.2.4. Declaration that reflects the content of the declaration of conformity
• 1.2.5. Intended use of the trucks
• 1.2.6. Additional information
• 1.2.7. Hazard assessment
• 1.2.8. Disposing of components and batteries
• 1.2.9. Impermissible use
• 1.2.10. Description of use and climatic conditions
• 1.2.11. Symbols used
• 1.2.12. Electric Pallet Truck 115102
• 1.3. safety
• 1.3.1. Safety guidelines
• 1.3.2. Residual risks
• 1.3.3. Stability
• 1.3.4. Operating company
• 1.3.5. Drivers
• 1.3.6. Competent person
• 1.3.7. Regulations
• 1.3.8. Handling consumables
• 1.3.9. EMC Electromagnetic compatibility
• 1.4. General layout
• 1.4.1. Labels
• 1.4.2. Nameplate
• 1.4.3. Full view of 115102, models T16P02 and T20P02
• 1.4.4. control unit
• 1.4.5. Battery charge indicator
• 1.4.6. Digicode option (LFM Go)
• 1.4.7. LFM Connect option
• 1.5. Application
• 1.5.1. Settings
• 1.5.2. Checks before first commissioning
• 1.5.3. Preshift checks before starting work
• 1.5.4. Operating Instructions
• 1.5.5. Driving the truck
• 1.5.6. Using the truck on ramps
• 1.5.7. Creep Speed function
• 1.5.8. Braking, lifting, lowering, horn
• 1.5.9. Working with loads
• 1.5.10. Lifting and towing
• 1.5.11. Cold store usage (optional)
• 1.6. Maintenance
• 1.6.1. Inspection and maintenance work tables
• 1.6.2. hour maintenance plan
• 1.6.3. hour maintenance plan
• 1.6.4. hour maintenance plan
• 1.6.5. Technical inspection and maintenance characteristics
• 1.6.6. Recommended lubricants
• 1.6.7. Preshift checks
• 1.6.8. Check braking
• 1.6.9. Testing safety devices
• 1.6.10. Checking the battery charging status
• 1.6.11. Connecting.disconnecting the battery plug connector
• 1.6.12. Opening the battery cover
• 1.6.13. Battery charging with an external charger
• 1.6.14. Cleaning the battery and its compartment
• 1.6.15. Accessing the electrical control compartment
• 1.6.16. Checking fuses
• 1.6.17. Checking the condition of cables, terminals and the battery connector
• 1.6.18. Vertical change batteriesremoval.replacement
• 1.6.19. Lateral change batterychanging the battery using a trolley
• 1.6.20. Lateral change batterychanging the battery using a mobile support
• 1.6.21. hour maintenance plan
• 1.6.22. hour maintenance plan
• 1.6.23. hour maintenance plan
• 1.7. Datasheet
• 1.7.1. Technical datasheet
• 1.7.2. Technical datasheet T16P02
• 1.7.3. Technical datasheet T2002
• 1.7.4. Ecodesign requirements for electric motors and variable speed drives
• 2. Electric pallet truckT16P02, T20P02Zapi controller
• 2.1. Table of content
• 2.2. Introduction
• 2.2.1. Legal requirements for marketing
• 2.2.2. Introduction
• 2.2.3. Intended use
• 2.2.4. Improper use
• 2.2.5. Additional information
• 2.2.6. Description of use and climatic conditions
• 2.2.7. Symbols used
• 2.2.8. Electric Pallet Truck 115102
• 2.3. Safety
• 2.3.1. Safety guidelines
• 2.3.2. Residual risks
• 2.3.3. Stability
• 2.3.4. EMC Electromagnetic compatibility
• 2.3.5. Handling consumables
• 2.3.6. Regulations
• 2.3.7. Competent person
• 2.4. General layout
• 2.4.1. Labels
• 2.4.2. Identification plates
• 2.4.3. Full view of 115102, models T16P02 and T20P02
• 2.4.4. control unit
• 2.4.5. Battery Charging Indicator
• 2.4.6. Digicode option (LFM Go)
• 2.4.7. LFM Connect option
• 2.5.1. Settings
• 2.5.2. Checks before first commissioning
• 2.5.3. Preshift checks before starting work
• 2.5.4. Operating Instructions
• 2.5.5. Driving the truck
• 2.5.6. Using the truck on ramps
• 2.5.7. Creep Speed Function
• 2.5.8. Braking, lifting, lowering, horn
• 2.5.9. Working with loads
• 2.5.10. Lifting and towing
• 2.5.11. Cold store usage (optional)
• 2.6. Maintenance
• 2.6.1. Inspection and maintenance work tables
• 2.6.2. hour maintenance plan
• 2.6.3. hour maintenance plan
• 2.6.4. hour maintenance plan
• 2.6.5. Technical inspection and maintenance characteristics
• 2.6.6. Recommended lubricants
• 2.6.7. Preshift checks
• 2.6.8. Check braking
• 2.6.9. Testing the safety devices
• 2.6.10. Checking the battery charging status
• 2.6.11. Connecting.disconnecting the battery plug connector
• 2.6.12. Opening the battery cover
• 2.6.13. Battery charging with an external charger
• 2.6.14. Cleaning the battery and its compartment
• 2.6.15. Accessing the electrical control compartment
• 2.6.16. Checking the fuses
• 2.6.17. Checking the condition of cables, terminals and the battery connector
• 2.6.18. Vertical change batteriesremoval.replacement
• 2.6.19. Lateral change batterychanging the battery using a trolley
• 2.6.20. Lateral change batterychanging the battery using a mobile support
• 2.6.21. hour maintenance plan
• 2.6.22. hour maintenance plan
• 2.6.23. hour maintenance plan
• 2.7. Datasheet
• 2.7.1. Technical datasheet
• 2.7.2. Technical datasheet T16P02
• 2.7.3. Technical datasheet T2002
• 3. Electric pallet truckT20PHP
• 3.1. Table of content
• 3.2. Introduction
• 3.2.1. Introduction
• 3.2.2. Specific uses of the truck
• 3.2.3. Description of use and climatic conditions
• 3.2.4. Symbols used
• 3.2.5. Legal requirements for marketing
• 3.2.6. Electric pallet truck
• 3.3. Safety
• 3.3.1. Safety guidelines
• 3.3.2. Residual risks
• 3.3.3. Stability
• 3.3.4. Safety rules
• 3.3.5. Handling consumables
• 3.3.6. Periodic general checks on the trucks
• 3.4. General layout
• 3.4.1. Labels
• 3.4.2. Identification label
• 3.4.3. General view
• 3.4.4. Control unit
• 3.4.5. Battery charge indicator
• 3.4.6. Digicode option (LFM Go)
• 3.4.7. LFM Connect option
• 3.5. Application
• 3.5.1. Settings
• 3.5.2. Checks before first commissioning
• 3.5.3. Routine preshift checks
• 3.5.4. Driving the truck
• 3.5.5. Using the truck on ramps
• 3.5.6. Braking, lifting, lowering, horn
• 3.5.7. Working with loads
• 3.5.8. Lifting and towing
• 3.5.9. Cold store usage (optional)
• 3.6. Maintenance
• 3.6.1. Inspection and maintenance work tables
• 3.6.2. hour maintenance plan
• 3.6.3. hour maintenance plan
• 3.6.4. hour maintenance plan
• 3.6.5. Technical inspection and maintenance characteristics
• 3.6.6. Recommended lubricants
• 3.6.7. Preshift checks
• 3.6.8. Checking the brakes
• 3.6.9. Testing safety devices
• 3.6.10. Checking the battery charging status
• 3.6.11. Connecting.disconnecting the battery plug connector
• 3.6.12. Opening the battery cover
• 3.6.13. Battery charging with an external charger
• 3.6.14. Cleaning the battery and its compartment
• 3.6.15. Accessing the electrical control compartment
• 3.6.16. Check fuses
• 3.6.17. Checking the condition of cables, terminals and the battery connector
• 3.6.18. Lateral change batterychanging the battery using a trolley
• 3.6.19. Lateral change batterychanging the battery using a mobile support
• 3.6.20. hour maintenance plan
• 3.6.21. hour maintenance plan
• 3.6.22. hour maintenance plan
• 3.7. Datasheet
• 3.7.1. Main technical data
• 3.7.2. Technical datasheet T20PHP
• 4. Leadacid battery charger 24V
• 5. Leadacid battery charger 24V . 48V
• 6. Leadacid battery charger 24V . 48V . 80V