Description
-
Model List:
- N20
- 1. Leadacid battery charger 24V
- 2. Leadacid battery charger 24V . 48V
- 3. Leadacid battery charger 24V . 48V . 80V
- 4. Lowlevel order pickerN20, N24, N20HP, N24HP
- 4.1. Table of content
- 4.2. Introduction
- 4.2.1. Introduction
- 4.2.2. Intended use
- 4.2.3. Intended use
- 4.2.4. Description of use and climatic conditions
- 4.2.5. Impermissible use
- 4.2.6. Symbols used
- 4.2.7. Taking delivery of the industrial truck
- 4.2.8. Disposing of gel and lead batteries
- 4.3. Safety
- 4.3.1. Safety regulations
- 4.3.2. Handling consumables
- 4.3.3. Draining
- 4.3.3.1. Noise emission values
- 4.3.3.2. Frequency characteristics for vibrations imparted to the human body
- 4.3.4. Residual risks
- 4.3.5. Stability
- 4.3.6. Competent person
- 4.3.7. Regulations
- 4.3.8. Periodic general checks on trucks
- 4.4. General view
- 4.4.1. Label diagrams
- 4.4.2. Identification plates
- 4.4.3. Label (only for CE)
- 4.4.4. General view of the truck
- 4.4.5. Technical compartment of the 4point truck
- 4.4.6. View of the technical compartment of the 5point truck
- 4.4.7. Controls N20 N24
- 4.4.8. Display function
- 4.5. Operation
- 4.5.1. N20 N24 model 1159 lowlevel order picker
- 4.5.2. Checks before first commissioning
- 4.5.3. Preshift checks
- 4.5.4. Daily checks before starting work
- 4.5.4.1. Checking the drive direction controls
- 4.5.4.2. Checking the brakes
- 4.5.4.3. Checking the raising.lowering controls
- 4.5.4.4. Checking the electric steering
- 4.5.4.5. Checking the safety devices
- 4.5.5. Truck operating instructions
- 4.5.6. Driving regulations
- 4.5.7. Display
- 4.5.7.1. Display settings
- 4.5.8. Driving
- 4.5.8.1. Identification of the direction of travel
- 4.5.8.2. Startup
- 4.5.8.3. Forward travel . reverse travel
- 4.5.8.4. Safety when reversing speed limitation (N20 fitted with afixed stabiliser wheel only)
- 4.5.8.5. Steering
- 4.5.8.6. Changing the drive direction
- 4.5.8.7. Emergency stop button
- 4.5.8.8. Operation in rideon mode
- 4.5.8.9. Pedestrian mode option
- 4.5.8.10. Horn
- 4.5.8.11. Braking
- 4.5.8.12. Use of the truck on a slope
- 4.5.8.13. Safety when turning speed limitation
- 4.5.8.14. Turning stability
- 4.5.9. connect access system (LFM)
- 4.5.10. Transporting loads
- 4.5.10.1. Using the load arm raising and lowering controls
- 4.5.10.2. Load handling
- 4.5.11. Before leaving the truck
- 4.5.12. Gel and leadacid battery
- 4.5.12.1. General information on batteries
- 4.5.12.2. Charging the battery
- 4.5.12.3. Checking the battery charge status
- 4.5.12.4. Opening the battery hood
- 4.5.12.5. Plugging in . unplugging the battery connector
- 4.5.12.6. Charging the battery using an external charger
- 4.5.12.7. General information on changing batteries
- 4.5.12.8. Changing the vertical access battery
- 4.5.12.9. Side access battery unlocking.locking the battery
- 4.5.12.10. Side access battery changing using a roller frame
- 4.5.12.11. Side access battery changing using a trolley
- 4.5.12.12. Side access battery selection of battery compartment opening side
- 4.5.13. Operating the truck in an emergency
- 4.5.13.1. Towing and transporting the truck
- 4.5.14. Operating the truck in specific situations
- 4.5.14.1. Slinging the truck
- 4.5.14.2. Lifting the truck
- 4.6. Maintenance
- 4.6.1. General information
- 4.6.2. Technical data for inspection and maintenance
- 4.6.3. Recommended oils
- 4.6.4. Access to the technical compartment
- 4.6.5. Regular maintenance
- 4.6.6. Maintenance schedule
- 4.6.7. Chassis, bodywork and fittings
- 4.6.7.1. Cleaning the truck
- 4.6.7.2. Cleaning the battery and the battery compartment
- 4.6.7.3. Seat checking the condition
- 4.6.7.4. Handlebar checking the condition
- 4.6.8. Motor
- 4.6.8.1. Cleaning the traction motor cooling fins
- 4.6.9. Steering unit.wheels.brake system
- 4.6.9.1. Checking the condition of the wheels
- 4.6.9.2. Cleaning the pinion gear of the steering geared motor
- 4.6.10. Electrical system
- 4.6.10.1. Cleaning and blowing out the electrical components
- 4.6.10.2. Checking the electrolyte level and topping up with water
- 4.6.10.3. Checking the condition of cables, terminals and battery connector
- 4.6.11. Hydraulic system
- 4.6.11.1. Checking the main hydraulic system for leaks
- 4.6.11.2. Checking the oil level in the main system
- 4.6.11.3. Checking the controlled stabilisers for leaks
- 4.6.11.4. Checking the oil level in the controlled stabilisers
- 4.6.12. Storage and disposal
- 4.6.12.1. Storing a truck equipped with a Gel or Lead battery
- 4.6.12.2. Disposal of old trucks
- 4.7. Technical specification
- 4.7.1. N20.N24 datasheet
- 4.7.2. Ecodesign requirements for electric motors and variable speed drives
There are no reviews yet.