Linde 1163-01 – D10, D10 AP, D10 AP-B, D10FP Operating Instructions SN W41163V00060 and up

Description

• Model List:
  • D10
  • D10 AP
  • D10 AP-B
  • D10FP

• 1. V lithiumion batteries
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Important information about the compatibility of the lithiumion battery and truck
• 1.2.2. Before using the truck
• 1.2.3. Important information about this manual
• 1.2.4. Identification label on the lithiumion battery
• 1.2.5. Correct use
• 1.2.6. Dangerous misuse
• 1.2.7. Productspecific risks
• 1.2.8. Information on the conformity of lithiumion batteries
• 1.2.9. Explanations of terms and symbols
• 1.2.10. Qualification of the user
• 1.2.11. Description of use and climatic conditions
• 1.3. Safety
• 1.3.1. Battery management system and safety
• 1.3.2. What to do in an emergency
• 1.3.3. Firstaid measures
• 1.4. General views
• 1.4.1. General view of 24V LiB batteries from 1.7 to 3.5
• 1.4.2. General view of the 24V LiB 7.1 battery
• 1.4.3. General view of the 24V LiB battery from 10.6 to 14.2
• 1.5.1. Description of the battery
• 1.5.2. Safety guidelines
• 1.5.3. Status of the battery on delivery
• 1.5.4. Transport mode
• 1.5.5. Connecting the battery to the truck
• 1.5.6. Switching on the battery
• 1.5.7. Modes of operation
• 1.5.8. Temperature conditions for operating . charging
• 1.5.9. Charging the battery
• 1.5.10. Changing the lithiumion battery
• 1.5.11. Switching off the battery
• 1.5.12. Resolving battery faults
• 1.5.13. Transporting lithiumion batteries
• 1.6. Maintenance
• 1.6.1. Regular maintenance
• 1.6.2. Service plan
• 1.6.3. Cleaning the battery
• 1.6.4. Transporting and storing within the company
• 1.6.5. Disposing of batteries
• 1.7. Technical specifications
• 1.7.1. Lithiumion battery datasheet
• 2. Double pallet stackerD10, D10 B, D10 AP, D10 AP B
• 2.1. Table of content
• 2.2. Introduction
• 2.2.1. Your truck
• 2.2.2. Conformity marking
• 2.2.3. Declaration that reflects the content of the declaration of conformity
• 2.2.4. Identification label
• 2.2.5. Correct use
• 2.2.6. Description of use and climatic conditions
• 2.2.7. Impermissible use
• 2.2.8. Symbols used
• 2.2.9. Taking delivery of the industrial truck
• 2.2.10. Rules for the operating company of industrial trucks
• 2.2.11. Disposing of gel and lead batteries
• 2.3. Safety
• 2.3.1. Safety regulations
• 2.3.2. Handling consumables
• 2.3.3. Emissions
• 2.3.4. Residual risks
• 2.3.5. Stability
• 2.3.6. Competent person
• 2.3.7. Periodic general checks on the trucks
• 2.4. General views
• 2.4.1. General view on a pedestrian truck
• 2.4.2. General view on a rideon truck
• 2.4.3. Controls
• 2.4.4. Display
• 2.4.5. Black and white display
• 2.4.6. Electronic key (option)
• 2.4.7. Labels
• 2.5.1. Technical description
• 2.5.2. Checks before first commissioning
• 2.5.3. Preshift checks before starting work
• 2.5.4. Daily checks before starting work
• 2.5.5. Truck operating instructions
• 2.5.6. Display
• 2.5.7. Driving regulations
• 2.5.8. Driving without platform (pedestrian model)
• 2.5.9. Driving with platform (rideon model)
• 2.5.10. Using the truck on a slope
• 2.5.11. BlueSpot
• 2.5.12. Best Value option Specific features of the truck
• 2.5.13. connect access system (LFM)
• 2.5.14. Transporting loads
• 2.5.15. Driving assistance system Speed Management
• 2.5.16. Cold store usage (optional)
• 2.5.17. Before leaving the truck
• 2.5.18. Gel and lead battery
• 2.5.19. Handling the truck in an emergency
• 2.5.20. Handling the truck in specific situations
• 2.6. Maintenance
• 2.6.1. General information
• 2.6.2. Technical data for inspection and maintenance
• 2.6.3. Recommended lubricants
• 2.6.4. Easily accessing the technical compartment
• 2.6.5. Regular maintenance
• 2.6.6. Service plan
• 2.6.7. Chassis, bodywork and fittings
• 2.6.8. Transmission
• 2.6.9. Steering and wheels
• 2.6.10. Electrical equipment
• 2.6.11. Hydraulic systems
• 2.6.12. Lift mast
• 2.6.13. Storage and disposal
• 2.7. Datasheet
• 2.7.1. D10 pedestrian model datasheet
• 2.7.2. D10 rideon model datasheet
• 2.7.3. D10 mast types
• 2.7.4. Ecodesign requirements for electric motors and variable speed drives
• 3. Double pallet stackerD10 FP
• 3.1. Table of content
• 3.2. Introduction
• 3.2.1. Your truck
• 3.2.2. Conformity marking
• 3.2.3. Declaration that reflects the content of the declaration of conformity
• 3.2.4. Identification label
• 3.2.5. Correct use
• 3.2.6. Description of use and climatic conditions
• 3.2.7. Impermissible use
• 3.2.8. Symbols used
• 3.2.9. Taking delivery of the industrial truck
• 3.2.10. Rules for the operating company of industrial trucks
• 3.2.11. Disposing of gel and lead batteries
• 3.3. Safety
• 3.3.1. Safety regulations
• 3.3.2. Handling consumables
• 3.3.3. Emissions
• 3.3.4. Residual risks
• 3.3.5. Stability
• 3.3.6. Competent person
• 3.3.7. Periodic general checks on the trucks
• 3.4. General views
• 3.4.1. General view of the truck
• 3.4.2. General view of the technical compartment
• 3.4.3. Controls
• 3.4.4. Display
• 3.4.5. Black and white display
• 3.4.6. Electronic key (option)
• 3.4.7. Labels
• 3.5.1. Technical description
• 3.5.2. Checks before first commissioning
• 3.5.3. Preshift checks before starting work
• 3.5.4. Daily checks before starting work
• 3.5.5. Truck operating instructions
• 3.5.6. Adjusting the handlebar height
• 3.5.7. Display
• 3.5.8. Driving regulations
• 3.5.9. Driving
• 3.5.10. BlueSpot
• 3.5.11. connect access system (LFM)
• 3.5.12. Transporting loads
• 3.5.13. Driving assistance system Speed Management
• 3.5.14. Cold store usage (optional)
• 3.5.15. Before leaving the truck
• 3.5.16. Gel and lead battery
• 3.5.17. Handling the truck in an emergency
• 3.5.18. Handling the truck in specific situations
• 3.6. Maintenance
• 3.6.1. General information
• 3.6.2. Technical data for inspection and maintenance
• 3.6.3. Recommended lubricants
• 3.6.4. Easily accessing the technical compartment
• 3.6.5. Regular maintenance
• 3.6.6. Service plan
• 3.6.7. Chassis, bodywork and fittings
• 3.6.8. Steering and wheels
• 3.6.9. Electrical equipment
• 3.6.10. Hydraulic systems
• 3.6.11. Lift mast
• 3.6.12. Storage and disposal
• 3.7. Datasheet
• 3.7.1. D10 FP datasheet
• 3.7.2. D10 FP mast type
• 3.7.3. Ecodesign requirements for electric motors and variable speed drives
• 4. Leadacid battery charger 24V
• 5. Leadacid battery charger 24V . 48V
• 6. Leadacid battery charger 24V . 48V . 80V
• 7. LiIonCharger 24V . 120A
• 8. Lithiumion batteriesD10, D10 AP, T20 AP, T25, T25 AP, T30
• 8.1. Table of content
• 8.2. Introduction
• 8.2.1. Introduction
• 8.2.2. Information on the conformity of lithiumion batteries
• 8.3. Safety
• 8.3.1. Special lithiumion safety rules
• 8.3.2. What to do in the event of incorrect use
• 8.3.3. Personal protective measures following an incident
• 8.3.4. What to do in the event of an accidental spillage
• 8.3.5. Transporting a lithiumion battery
• 8.3.6. Scrapping lithiumion batteries
• 8.4. General views
• 8.4.1. Lithiumion battery types
• 8.4.2. Labels on the top of lithiumion batteries
• 8.4.3. Labels on the sides of lithiumion batteries
• 8.5.1. Checking the charge status
• 8.5.2. Connecting.disconnecting the battery connector
• 8.5.3. Commissioning a truck equipped with a side access lithiumion battery
• 8.5.4. Automatic battery shutoff
• 8.5.5. Battery fitted with a compartment
• 8.5.6. Specific features of the display
• 8.5.7. Installing the external charger
• 8.5.8. Charging lithiumion batteries using an external charger
• 8.5.9. Using the side socket to charge the battery
• 8.5.10. Battery charging times
• 8.5.11. Using the onboard charger
• 8.5.12. Changing the battery
• 8.5.13. Battery error codes
• 8.5.14. Lithiumion batteries Longterm storage
• 8.6. Maintenance
• 8.6.1. Maintenance plan for lithiumion batteries
• 8.6.2. Chassis, bodywork and fittings
• 8.6.3. Electrical equipment
• 8.7. Technical specifications
• 8.7.1. Lithiumion battery weight precision