Linde 1166-01 – MR12AP, MR15AP Production site Xiamen Operating Instructions SN CT1166J00001 and up

Description

• Model List:
  • MR12AP
  • MR15AP

• 1. Electric Reach TruckMR12AP, MR15AP
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Introduction
• 1.2.2. Intended use
• 1.2.3. Improper use
• 1.2.4. Additional information
• 1.2.5. Description of use and climatic conditions
• 1.2.6. Symbols used
• 1.2.7. Technical description
• 1.3. Safety
• 1.3.1. Safety guidelines
• 1.3.2. Residual risks
• 1.3.3. Stability
• 1.3.4. Handling consumables
• 1.3.5. EMC Electromagnetic compatibility
• 1.3.6. Regulations
• 1.3.7. Competent person
• 1.4. Overview
• 1.4.1. General view
• 1.4.2. Dataplate and safety labels
• 1.4.3. Identification plates
• 1.4.4. Tiller operating device
• 1.4.5. Key switch
• 1.4.6. Display element
• 1.4.7. Platform assembly
• 1.4.8. Side protection safety bars
• 1.4.9. Emergency off switch
• 1.5. Operation
• 1.5.1. Intended use of the trucks
• 1.5.2. Checks before use
• 1.5.3. Breakin period precautions
• 1.5.4. Checking the working environment
• 1.5.5. General information on batteries
• 1.5.6. Battery charging
• 1.5.7. Drive system
• 1.5.7.1. Starting
• 1.5.7.2. Driving and steering
• 1.5.7.3. Forward travel.reverse travel
• 1.5.7.4. Braking
• 1.5.7.5. Collision protection button
• 1.5.7.6. Horn operation
• 1.5.7.7. Use on a slope
• 1.5.7.8. Using the truck on a slope
• 1.5.8. Safety guidelines for handling loads
• 1.5.9. Operating the lifting device
• 1.5.10. Emergency lowering
• 1.5.11. Parking the truck securely
• 1.5.12. Putting the equipment back into operation
• 1.5.13. Slinging
• 1.5.14. Transporting the truck
• 1.6. Maintenance
• 1.6.1. General maintenance information
• 1.6.1.1. General
• 1.6.1.2. Daily inspection
• 1.6.1.3. Servicing and maintenance personnel training and qualification
• 1.6.1.4. Battery maintenance staff
• 1.6.1.5. Maintenance operations that do not require special training
• 1.6.1.6. Technical inspection and maintenance data
• 1.6.2. hour service plan
• 1.6.3. hour service plan
• 1.6.4. Maintenance work
• 1.6.4.1. Preservice preparations
• 1.6.4.2. Lubrication and servicing
• 1.6.4.3. Disassembling the battery
• 1.6.4.4. Battery maintenance and servicing
• 1.6.4.5. Disassembling the cowling
• 1.6.4.6. Checking the hydraulic oil level
• 1.6.4.7. Topping up the gear oil
• 1.6.4.8. Checking fuses
• 1.6.5. Malfunction analysis
• 1.7. Technical data
• 1.7.1. Technical datasheet
• 1.8. Schematic diagrams
• 1.8.1. Electrical diagram
• 1.8.2. Hydraulic diagram
• 1.8.3. Brake Principle