Linde 1167-01 – ML10 Production site Xiamen, Ningbo China Operating Instructions SN CT1167H00001 and up SN up to 05.18

Description

• Model List:
  • ML10

• 1. Electric Pallet StackerML10
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Introduction
• 1.2.2. Intended use
• 1.2.3. Improper use
• 1.2.4. Extra information
• 1.2.5. Description of use and climatic conditions
• 1.2.6. Symbols used
• 1.2.7. Technical description
• 1.3. Safety
• 1.3.1. Safety guidelines
• 1.3.2. Residual risks
• 1.3.3. Stability
• 1.3.4. Use of lubricants
• 1.3.5. Handling consumables
• 1.3.6. Regulations
• 1.3.7. Competent person
• 1.4. Views
• 1.4.1. Drive directions
• 1.4.2. Overview of main components
• 1.4.3. Safety devices and warning labels
• 1.4.4. Identification plates
• 1.5. Operation
• 1.5.1. Operating instructions
• 1.5.2. Preoperational checks and actions
• 1.5.2.1. Test run
• 1.5.2.2. Checks before first use
• 1.5.3. Commissioning and driving
• 1.5.3.1. Drive system
• 1.5.3.2. Using the stacker on a slope
• 1.5.3.3. Braking, lifting, lowering, horn
• 1.5.4. Load handling
• 1.5.4.1. Safety guidelines for handling loads
• 1.5.4.2. Load handling
• 1.5.5. Handling the stacker in special circumstances
• 1.5.5.1. Stacker towing procedure
• 1.5.5.2. Emergency lowering
• 1.5.5.3. Hoisting, jacking, towing, transporting and storage
• 1.5.6. Battery use
• 1.5.6.1. Battery type
• 1.5.6.2. Preparation
• 1.5.6.3. Charging the battery
• 1.5.7. Decommissioning
• 1.5.7.1. Parking the stacker
• 1.5.8. Storage
• 1.5.8.1. Storing the stacker for an extended period
• 1.6. Maintenance
• 1.6.1. Inspection and maintenance work tables
• 1.6.1.1. General comments
• 1.6.1.2. Calendar of testing and maintenance operations
• 1.6.1.3. hour maintenance plan
• 1.6.1.4. hour maintenance plan
• 1.6.1.5. hour maintenance plan
• 1.6.1.6. Technical inspection and maintenance characteristics
• 1.6.1.7. Recommended lubricants
• 1.6.2. Maintenance safety instructions
• 1.6.2.1. Safety measures for maintenance and repair
• 1.6.2.2. Work on the electrical equipment
• 1.6.2.3. Safety devices
• 1.6.2.4. Programming
• 1.6.3. Preparatory tasks for maintenance
• 1.6.3.1. Lifting and jacking up the stacker
• 1.6.4. Cleaning
• 1.6.4.1. Cleaning the stacker
• 1.6.5. Essential maintenance
• 1.6.5.1. Servicing the brakes
• 1.6.5.2. Servicing the wheels and rollers
• 1.6.5.3. Lifting device
• 1.6.5.4. Fuses
• 1.6.6. hour maintenance plan
• 1.6.6.1. Checking the oil level and sealing of the hydraulic system
• 1.6.6.2. Servicing the pump motor
• 1.6.6.3. Servicing the electrical system
• 1.6.6.4. Servicing the brakes
• 1.6.6.5. Checking the forks
• 1.6.6.6. Servicing the lift mast
• 1.6.7. hour maintenance plan
• 1.6.7.1. Servicing the hydraulic system
• 1.6.7.2. Servicing the lift mast
• 1.6.7.3. Servicing the battery according to the manufacturers instructions
• 1.6.7.4. Electrical insulation test
• 1.6.8. hour maintenance plan
• 1.6.8.1. Reduction gear maintenance
• 1.7. Technical data
• 1.7.1. Main technical data
• 1.7.2. Technical data