Linde 1169-02 – L10P-02 to L14PAS-02 Production site XM2 Operating Instructions SN C21169Y50006 and up

Description

• Model List:
  • L10P-02
  • L10PAS-02
  • L12P-02
  • L12PAS-02
  • L14P-02
  • L14PAS-02

• 1. Electric Pallet StackerL10P02, L12P02, L14P02, L10PAS02, L12PAS02, L14PAS02
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. General information
• 1.2.2. Conformity marking
• 1.2.3. Declaration that reflects the content of the declaration of conformity
• 1.2.4. Factory nameplate
• 1.2.5. Hazard assessment
• 1.2.6. Intended use
• 1.2.7. Impermissible use
• 1.2.8. Improper use
• 1.2.9. Symbols used
• 1.2.10. Disposing of components and batteries
• 1.2.11. Description of use and climatic conditions
• 1.2.12. Additional information
• 1.3. Safety
• 1.3.1. Safety guidelines
• 1.3.2. Residual risks
• 1.3.3. Stability
• 1.3.4. Operating company
• 1.3.5. Drivers
• 1.3.6. Competent person
• 1.3.7. Regulations
• 1.3.8. Handling consumables
• 1.4. Views
• 1.4.1. Digicode option (LFM Go)
• 1.5. Operation
• 1.5.1. Instructions for runningin
• 1.5.2. Preoperational checks and actions
• 1.5.2.1. Commissioning
• 1.5.2.2. Daily checks before use
• 1.5.3. Using the RFID Keypad (optional)
• 1.5.3.1. RFID Keypad installation position
• 1.5.4. Transporting loads
• 1.5.4.1. Load handling safety rules
• 1.5.5. Use in cold stores
• 1.5.5.1. Designation
• 1.5.6. Handling the stacker in special circumstances
• 1.5.6.1. Emergency lowering
• 1.5.6.2. Truck towing procedure
• 1.5.7. Handing batteries
• 1.5.7.1. Battery type
• 1.5.7.2. Preparation
• 1.5.7.3. Charging the battery using an external charger
• 1.5.8. Decommissioning
• 1.5.8.1. Park the truck
• 1.5.9. Storage
• 1.5.9.1. Measures when storing the stacker for a longer period of time
• 1.6. Maintenance
• 1.6.1. Inspection and maintenance work tables
• 1.6.1.1. General
• 1.6.1.2. Servicing and maintenance personnel training and qualification
• 1.6.1.3. Battery maintenance staff
• 1.6.1.4. Maintenance operations that do not require special training
• 1.6.1.5. Calendar of testing and maintenance operations
• 1.6.2. Maintenance safety instructions
• 1.6.2.1. Safety measures for maintenance and repair
• 1.6.2.2. Work on the electrical equipment
• 1.6.2.3. Safety devices
• 1.6.2.4. Settings
• 1.6.2.5. Working on the lift mast
• 1.6.3. Essential maintenance
• 1.6.3.1. Battery maintenance
• 1.6.3.2. Servicing the brake
• 1.6.3.3. Lifting device
• 1.6.4. Maintenance plan as required
• 1.6.4.1. Maintaining the hydraulic system
• 1.6.4.2. Servicing the lift mast
• 1.6.4.3. Servicing the battery according to the manufacturers instructions
• 1.6.4.4. Electrical insulation test
• 1.7. Technical parameters
• 1.7.1. Technical data L10P02 . L12P02 . L14P02
• 1.7.2. Ecodesign requirements for electric motors and variable speed drives