Linde 126-01 – P60Z EX Operating Instructions

Description

• Model List:
  • P60Z EX

• 1. Electric tow tractorP60Z
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Your tow tractor
• 1.2.2. Intended use
• 1.2.3. Impermissible use
• 1.2.4. Basic information on explosion protection
• 1.2.5. Description of use and climatic conditions
• 1.2.6. Symbols used
• 1.2.7. General description
• 1.2.8. Technical description
• 1.2.9. Receiving the industrial truck
• 1.2.10. Legal requirements for placing on the market
• 1.3. Safety
• 1.3.1. Safety regulations
• 1.3.2. Residual risks
• 1.3.3. Stability
• 1.3.4. If the tow tractor tips over
• 1.3.5. Qualified person
• 1.3.6. Regulations
• 1.4. Overview
• 1.4.1. Labelling
• 1.4.2. Nameplate
• 1.4.3. Operating devices and display elements
• 1.4.4. Indicator lights
• 1.4.5. Display unit
• 1.5. Operation
• 1.5.1. Instructions for runningin
• 1.5.2. Preshift checks
• 1.5.2.1. Preshift service plan
• 1.5.2.2. Check the battery state of charge
• 1.5.2.3. Check all controls and their operation
• 1.5.2.4. Check all Interlock switches
• 1.5.2.5. Check tyre pressures
• 1.5.2.6. Check the automatic towing coupling (if fitted)
• 1.5.2.7. Top up the screen wash reservoir (if fitted)
• 1.5.3. Ensuring the tyre leak resistance
• 1.5.4. Battery male connector
• 1.5.5. Battery
• 1.5.6. Replacing the battery
• 1.5.7. Drivers seat
• 1.5.8. Brake system
• 1.5.9. Driving
• 1.5.10. Coupling trailers
• 1.5.11. Towing guidelines
• 1.5.12. Pulling trailers
• 1.5.13. Loading the compartment
• 1.6. Maintenance
• 1.6.1. Maintenance safety guidelines
• 1.6.2. Battery hood
• 1.6.3. Power saving function
• 1.6.4. Fuses
• 1.6.5. Jacking up the tow tractor
• 1.6.6. Recommended lubricants
• 1.6.7. Inspection and maintenance data
• 1.6.8. Information for maintenance
• 1.6.9. Maintenance schedules
• 1.6.9.1. Service plan as required
• 1.6.9.2. hour service plan
• 1.6.9.3. hour service plan
• 1.6.9.4. hour service plan
• 1.6.10. Motor
• 1.6.10.1. Checking the carbon brushes on the electric motor (and replacing if necessary)
• 1.6.11. Axles
• 1.6.11.1. Cleaning and checking the gearbox breather filter
• 1.6.11.2. Checking the drive axle
• 1.6.12. Chassis, bodywork and fittings
• 1.6.12.1. Cleaning the tow tractor
• 1.6.12.2. Checking and lubricating the drivers seat
• 1.6.12.3. Checking the seat belt for condition and function
• 1.6.12.4. Lubricating the battery hood
• 1.6.12.5. Lubricating the cab (if fitted)
• 1.6.12.6. Lubricating the automatic tow coupling (if fitted)
• 1.6.13. Undercarriage
• 1.6.13.1. Check wheel nut tightness
• 1.6.13.2. Checking the tyres
• 1.6.13.3. Checking and lubricating the steering chain
• 1.6.13.4. Lubricating the turntable steering bearing
• 1.6.13.5. Lubricating the front suspension
• 1.6.13.6. Checking the front link bracket
• 1.6.13.7. Checking and lubricating the front wheel bearings
• 1.6.13.8. Checking the brake system for damage, corrosion and leaks
• 1.6.13.9. Checking the brake fluid level
• 1.6.13.10. Checking the brake linings
• 1.6.13.11. Changing the brake fluid
• 1.6.13.12. Checking and lubricating the parking brake
• 1.6.13.13. Check the drive axle spring elements
• 1.6.13.14. Check the drive axle suspension
• 1.6.14. Operating devices
• 1.6.14.1. Checking operating devices and their function
• 1.6.15. Electrics.electronics
• 1.6.15.1. Checking the insulation monitoring
• 1.6.15.2. Replacing the carbon brushes
• 1.6.15.3. Checking the battery and battery cable status
• 1.6.15.4. Checking the condition and secure attachment of the electrical wires, cable connectors and connections
• 1.6.15.5. Cleaning the drive unit and controller
• 1.6.16. Towing the tow tractor
• 1.6.17. Transportation and loading
• 1.6.18. Shutting down the tow tractor
• 1.6.19. Recommissioning after storage
• 1.6.20. Disposal of old trucks
• 1.7. Technical data
• 1.7.1. Battery data
• 1.7.2. Wheel rim and tyre data
• 1.7.3. Technical data 24 volt
• 1.7.4. Technical data 48 volt
• 1.7.5. Noise emission levels
• 1.7.6. Frequency characteristic for human body vibrations