Linde 1294-01 – E30, E35 Production site Jinan Operating Instructions

Description

• Model List:
  • E30
  • E35 Production site Jinan

• 1. Electric Forklift TruckE30B01, E35B01, E30BHP01, E35BHP01, E30B30, E35B30, E30BHP30, E35BHP30
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Introduction
• 1.2.2. General information
• 1.2.3. Conformity marking
• 1.2.4. Declaration that reflects the content of the declaration of conformity
• 1.2.5. Declarations of conformity in accordance with directive RED 2014.53.EU
• 1.2.6. Nameplate (LX)
• 1.2.7. Factory dataplate (for exports)
• 1.2.8. Intended use
• 1.2.9. Hazard assessment
• 1.2.10. Improper use
• 1.2.11. Illustrations
• 1.2.12. Symbols used
• 1.2.13. Disposing of components and batteries
• 1.2.14. Description of use and climatic conditions
• 1.2.15. Technical description
• 1.3. Safety
• 1.3.1. Safety guidelines
• 1.3.2. Data security
• 1.3.3. Residual risks
• 1.3.4. Stability
• 1.3.5. Operating company
• 1.3.6. Drivers
• 1.3.7. Competent person
• 1.3.8. Regulations
• 1.3.9. Fitting attachments
• 1.3.10. Handling consumables
• 1.3.11. Emergency exit from drivers cab with windows
• 1.3.12. Manually lowering the fork arms with ISO
• 1.4. Overview
• 1.4.1. General view (V5)
• 1.4.2. General view (V3)
• 1.4.3. Controller and display unit (V5)
• 1.4.4. Controller and display unit (V5) dual pedal
• 1.4.5. Controller and display unit (V3)
• 1.4.6. Summary diagram of labels
• 1.4.7. Display unit (V5)
• 1.4.7.1. Display unit
• 1.4.8. Display unit (V3)
• 1.4.8.1. Display unit
• 1.4.9. Switch panel
• 1.5. Operation
• 1.5.1. Service plan before first start
• 1.5.2. Instructions for runningin
• 1.5.3. Preshift checks
• 1.5.4. Daily inspection items
• 1.5.5. Periodic inspection items
• 1.5.6. Mounting.dismounting
• 1.5.7. Seat belt status and performance checks
• 1.5.7.1. Checking condition and performance
• 1.5.7.2. Adjusting the seat and seat belt
• 1.5.8. Operating the horn
• 1.5.9. Steering operation
• 1.5.10. Adjusting the steering column
• 1.5.11. Keypad installation and use (option)
• 1.5.11.1. RFID Keypad
• 1.5.11.2. RFID Keypad usage and settings.
• 1.5.12. Operation differences between V5 and V3 models
• 1.5.13. Emergency off switch
• 1.5.14. Switching the truck on and off
• 1.5.15. Driving (singlepedal operation)
• 1.5.15.1. Driving
• 1.5.15.2. Forward travel
• 1.5.15.3. Reverse travel
• 1.5.15.4. Changing the drive direction
• 1.5.15.5. Starting on a slope
• 1.5.16. Driving (dualpedal operation)
• 1.5.16.1. Driving
• 1.5.16.2. Forward travel
• 1.5.16.3. Reverse travel
• 1.5.16.4. Changing the drive direction
• 1.5.16.5. Starting on a slope
• 1.5.17. Brake system
• 1.5.17.1. Brake system information
• 1.5.17.2. Foot brake.emergency brake
• 1.5.17.3. Electronic regenerative braking
• 1.5.17.4. Parking brake
• 1.5.18. Setting the display unit (V5)
• 1.5.18.1. Setting the display unit
• 1.5.19. Battery cover Open Closed
• 1.5.20. Battery hood gas spring
• 1.5.21. Checking battery level
• 1.5.22. Connecting the rechargeable battery to an external charger
• 1.5.23. Lifting devices and attachments
• 1.5.23.1. Operating the lifting device
• 1.5.23.2. Operating attachments
• 1.5.24. Transporting loads
• 1.5.24.1. Load centre distance and load capacity
• 1.5.24.2. Adjusting the fork spacing
• 1.5.24.3. Picking up a load
• 1.5.24.4. Loading
• 1.5.24.5. Driving with a load
• 1.5.24.6. Transporting suspended loads
• 1.5.24.7. Unloading
• 1.5.24.8. Tow coupling
• 1.5.24.9. Leaving the truck temporarily
• 1.5.24.10. Before exiting the truck
• 1.5.25. Transporting the truck
• 1.5.25.1. Dismantling.installing the lift mast
• 1.5.25.2. Regulations for removing the mast and towing
• 1.5.25.3. Use a truck or flatbed trailer to carry the forklift truck
• 1.5.25.4. Lifting the truck with a crane
• 1.5.26. Storing the truck
• 1.5.26.1. Taking the truck out of operation
• 1.5.27. Disposal of old trucks
• 1.6. Maintenance
• 1.6.1. Safety information for inspection and maintenance work
• 1.6.2. Regular maintenance
• 1.6.3. Table of first service checks
• 1.6.4. Service plan table
• 1.6.5. Cleaning the truck
• 1.6.6. Drive mechanism and transmission system
• 1.6.6.1. Checking the transmission gear and drive axle for leaks
• 1.6.6.2. Checking the brake fluid level in the brake fluid reservoir
• 1.6.6.3. Checking the joystick bellows
• 1.6.6.4. Adjust joysticks
• 1.6.6.5. Checking the wheels
• 1.6.6.6. Check the tyre inflation pressure
• 1.6.6.7. Tightening the wheel nuts
• 1.6.6.8. Changing wheels
• 1.6.6.9. Checking the condition of the antistatic belt
• 1.6.6.10. Clean and lubricate the steering axle
• 1.6.7. Chassis and bodywork
• 1.6.7.1. Checking the connecting bolts of the drive axle and lift mast
• 1.6.7.2. Check the overhead guard
• 1.6.7.3. Checking the battery cover locking devices
• 1.6.8. Drivers cab
• 1.6.8.1. Checking the pedal group for ease of movement and lubricating as required
• 1.6.8.2. Checking other bearings and connections and lubricating
• 1.6.8.3. Checking that the brake system is functioning properly
• 1.6.9. Electrics.electronics
• 1.6.9.1. Checking the condition of the batteries
• 1.6.9.2. Replacing the battery using a suspension arrangement
• 1.6.9.3. Inspecting and maintaining the lithiumion battery
• 1.6.10. Hydraulic system
• 1.6.10.1. Checking the hydraulic system for leaks
• 1.6.10.2. Checking the hydraulic oil level
• 1.6.10.3. Checking the breather filter is working normally
• 1.6.10.4. Checking installation of the tilt cylinder
• 1.6.10.5. Lubricating tilt cylinder bearings
• 1.6.11. Lifting system
• 1.6.11.1. Checking the fork arms and the fork arm quick release apparatus
• 1.6.11.2. Checking the working condition and installation of the lift mast, lifting chains and lift cylinder
• 1.6.11.3. Adjusting the length of the lifting chains and lubricating using chain spray
• 1.6.11.4. Lubricating the lift mast and chains with chain spray
• 1.6.12. Special equipment
• 1.6.12.1. Checking the preload of the double hoses (if equipped with attachments)
• 1.6.12.2. Cleaning and lubricating the sideshift forks and checking connections
• 1.7. Technical datasheet
• 1.7.1. Technical datasheet (V5)
• 1.7.2. Technical datasheet (V3)
• 1.7.3. Ecodesign requirements for electric motors and variable speed drives