Linde 131-01 – T30 EX 2G Operating Instructions

Description

• Model List:
  • T30 EX 2G

• 1. Leadacid battery charger 24V
• 2. Leadacid battery charger 24V . 48V
• 3. Leadacid battery charger 24V . 48V . 80V
• 4. Pallet truckT30 EX
• 4.1. Table of content
• 4.2. Introduction
• 4.2.1. Your industrial truck
• 4.2.2. Legal requirements for marketing
• 4.2.3. Identification plates . adhesive labels
• 4.2.4. Intended use
• 4.2.5. Basic information on explosion protection
• 4.2.6. Impermissible use
• 4.2.7. Symbols used
• 4.2.8. Receiving the industrial truck
• 4.2.9. Disposing of gel and lead batteries
• 4.3. Safety
• 4.3.1. Explosion protection safety guidelines
• 4.3.2. Protective equipment for explosion protection
• 4.3.3. Handling consumables
• 4.3.4. Emissions
• 4.3.4.1. Noise emission values
• 4.3.4.2. Vibration values for upper limbs
• 4.3.5. Residual risks
• 4.3.6. Stability
• 4.3.7. Competent person
• 4.4. Overview
• 4.4.1. Truck overview
• 4.4.2. Display elements
• 4.4.3. Operating devices
• 4.4.4. Display unit
• 4.4.5. Display function
• 4.4.6. Electronic key (option)
• 4.4.7. Labels
• 4.5. Operation
• 4.5.1. Industrial trucks with explosion protection
• 4.5.1.1. Description of use and climatic conditions
• 4.5.1.2. Technical description of explosion protection
• 4.5.1.3. Regular testing
• 4.5.1.4. Batteries for explosion protection
• 4.5.1.5. Wheels and tyres for explosion protection
• 4.5.1.6. Checking the tyres
• 4.5.1.7. Checking the leak resistance
• 4.5.1.8. Handling consumables
• 4.5.1.9. Towing
• 4.5.2. Service plan before initial commissioning
• 4.5.3. Preshift checks
• 4.5.4. Daily checks before starting work
• 4.5.4.1. Checking the drive direction controls
• 4.5.4.2. Checking the lift.lower controls
• 4.5.4.3. Checking the safety devices
• 4.5.4.4. Checking the electric steering
• 4.5.4.5. Brake testing
• 4.5.5. Truck operating instructions
• 4.5.6. Driving regulations
• 4.5.7. Display
• 4.5.7.1. Display settings
• 4.5.8. Driving
• 4.5.8.1. Switching the truck on and off
• 4.5.8.2. Driving
• 4.5.8.3. Determining the direction of travel
• 4.5.8.4. Forward travel.reverse travel
• 4.5.8.5. Steering
• 4.5.8.6. Reversing the direction of travel
• 4.5.8.7. Double throw safety switch
• 4.5.8.8. Emergency off switch
• 4.5.8.9. Horn
• 4.5.8.10. Using the truck on a slope
• 4.5.9. Braking
• 4.5.10. Before leaving the industrial truck
• 4.5.11. connect access system (LFM)
• 4.5.12. Transporting loads
• 4.5.12.1. Lifting and lowering the load arms
• 4.5.12.2. Handling loads
• 4.5.13. Before exiting the truck
• 4.5.13.1. Parking the industrial truck securely
• 4.5.14. Drive batteries
• 4.5.14.1. Leadacid battery
• 4.5.14.2. Connecting the battery to an external battery charger
• 4.5.14.3. Replacing the battery
• 4.5.15. Handling the truck in an emergency
• 4.5.15.1. Towing and transporting the truck
• 4.5.16. Handling the truck in special operating situations
• 4.5.16.1. Slinging the truck
• 4.5.16.2. Lifting the truck
• 4.6. Service and maintenance
• 4.6.1. Safety information regarding servicing work
• 4.6.2. Technical data for inspection and maintenance
• 4.6.3. Recommendations for consumables
• 4.6.4. Maintenance schedule
• 4.6.5. Additional service plan for explosion protection
• 4.6.6. Chassis, bodywork and fittings
• 4.6.6.1. Cleaning the industrial truck
• 4.6.6.2. Cleaning the battery and its compartment
• 4.6.6.3. Checking the pressuretight housings
• 4.6.6.4. Checking and lubricating the bearing points and joints
• 4.6.6.5. Other cleaning and greasing
• 4.6.6.6. Checking the antispark protection on the fork arms for wear
• 4.6.7. Motor
• 4.6.7.1. Cleaning the traction motor cooling fins
• 4.6.8. Steering.brakes.wheels
• 4.6.8.1. Tightening the wheel fastenings
• 4.6.8.2. Checking wheels for wear and damage
• 4.6.8.3. Lubricating the steering ring of the drive unit
• 4.6.8.4. Checking the brake system
• 4.6.9. Operating devices
• 4.6.9.1. Checking that the horn is working correctly
• 4.6.10. Electrics.electronics
• 4.6.10.1. Cleaning and blowing out the electrical components
• 4.6.10.2. Checking the electrolyte level and topping up with water
• 4.6.10.3. Checking the battery charge status
• 4.6.10.4. Checking the electric cables, cable connectors, cable connections and screw joints
• 4.6.11. Hydraulics
• 4.6.11.1. Maintaining the hydraulic system
• 4.6.12. Storage and disposal
• 4.6.12.1. Decommissioning the industrial truck
• 4.6.12.2. Disposal of old trucks
• 4.7. Technical data
• 4.7.1. Datasheet T30