Linde 1313-01 – H25CT, H27CT, H30CT, H32CT Operating Instructions SN 12.09 and up

Description

• Model List:
  • H25CT
  • H27CT
  • H30CT
  • H32CT

• 1. CT series LP Gas Forklift TruckModels H25CT, H27CT, H30CT, H32CT
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Scope
• 1.2.2. Obligations of the Equipment Owner
• 1.2.3. Operator Responsibilities
• 1.2.4. Proper use
• 1.2.5. Hazard messages
• 1.3. Safety
• 1.3.1. Before Operation
• 1.3.2. Operator Daily Checklist
• 1.3.3. Operating position
• 1.3.4. Pedestrians
• 1.3.5. Travel
• 1.3.6. Lifting and Lowering
• 1.3.7. Inclines, Ramps, Docks, Elevators
• 1.3.8. Avoiding Falls and Tipovers
• 1.3.9. Suspended Loads
• 1.3.10. Parking
• 1.3.11. Using LP Gas
• 1.3.11.1. Operating LP GasPowered Trucks
• 1.3.11.2. Refilling LP Gas Tanks
• 1.3.12. Safety During Maintenance
• 1.3.12.1. Personnel Qualifications
• 1.3.12.2. Hazardous Substances
• 1.3.12.3. Coolant reservoir or radiator
• 1.3.12.4. Starting Battery
• 1.3.12.5. Vehicle exhaust
• 1.3.12.6. Rotating fan blades
• 1.3.12.7. Wheels and Tires
• 1.3.13. Operator Warning Decals
• 1.3.13.1. Data plate
• 1.3.13.2. Parking brake warning decal
• 1.3.13.3. Operator warning decal
• 1.3.13.4. Trained operator warning decal
• 1.3.13.5. Never stand or walk under forks warning decal
• 1.3.13.6. Do not lift personnel warning decal
• 1.3.13.7. Crushed fingers warning decal
• 1.3.13.8. No step warning decal
• 1.3.13.9. Tipover warning decal
• 1.3.13.10. Disconnect LP hose warning decal
• 1.3.13.11. LP tank specification plate
• 1.3.13.12. Back up alarm warning decal
• 1.3.13.13. Hood latch warning decal
• 1.3.13.14. Hot coolant warning decal
• 1.4. Overview
• 1.4.1. Technical Description
• 1.4.2. Truck Components
• 1.4.3. Controls
• 1.4.4. Indicator Unit
• 1.4.5. Definition of directions
• 1.4.6. Vehicle Marking
• 1.4.6.1. Decal and Data Plate Location
• 1.4.6.2. Data Plate
• 1.4.7. Variants and Options
• 1.4.7.1. Mast variants
• 1.4.7.2. Attachments
• 1.4.7.3. System options
• 1.4.7.4. Chassis options
• 1.4.7.5. Cabin options
• 1.4.7.6. Operating environment options
• 1.5. Operation
• 1.5.1. Unloading and Preparing a New Truck for Operation
• 1.5.2. Setting Up the LP Tank Bracket
• 1.5.3. Reading LP Level
• 1.5.4. Adjusting the Operators Seat
• 1.5.5. Steering column tilt angle adjustment
• 1.5.6. Setting the Clock Display
• 1.5.7. Seat Belt
• 1.5.8. Engine Starting and Shutdown
• 1.5.9. Driving Dual Pedal Version
• 1.5.10. Driving Single Pedal Version (optional equipment)
• 1.5.11. Braking
• 1.5.12. Steering System
• 1.5.13. Horn
• 1.5.14. Fork Position Adjustment
• 1.5.15. Hydraulic Controls Individual Levers
• 1.5.16. Hydraulic Controls MultiFunction Levers
• 1.5.17. Lights and BackUp Alarm
• 1.5.18. Fan (optional equipment)
• 1.5.19. Tilt Memory (optional equipment)
• 1.5.20. Changing the LP Gas Tank
• 1.5.21. Opening the Hood
• 1.5.22. Towing Loads
• 1.5.23. Depressurization System for Auxiliary Hydraulics (optional equipment)
• 1.5.24. Towing the Truck
• 1.5.25. Manual Lowering of Fork Carriage
• 1.5.26. Securing the Truck for Transport
• 1.5.27. Hoisting the Truck
• 1.5.28. LongTerm Storage
• 1.6. Maintenance
• 1.6.1. Personnel Qualifications
• 1.6.2. Cleaning
• 1.6.2.1. Cleaning the Truck
• 1.6.2.2. Cleaning the Lift Chains
• 1.6.3. Operator Inspection and Maintenance
• 1.6.3.1. Daily Inspection Overview
• 1.6.3.2. Daily Inspection Checklist
• 1.6.3.3. Check for fluid leakage
• 1.6.3.4. Check overhead guard
• 1.6.3.5. Check hydraulic cylinders
• 1.6.3.6. Check lift chains
• 1.6.3.7. Check fork carriage
• 1.6.3.8. Check engine fan
• 1.6.3.9. Check engine oil level
• 1.6.3.10. Check the coolant level
• 1.6.3.11. Check fuel line
• 1.6.3.12. Check hydraulic oil level
• 1.6.3.13. Check decal condition
• 1.6.3.14. Check control lever bellows
• 1.6.3.15. Antistatic strap (optional equipment)
• 1.6.3.16. Check wheels and tires
• 1.6.3.17. Check the seat and seat belt
• 1.6.3.18. Check the steering axle
• 1.6.3.19. Check prefilter bowl (optional equipment)
• 1.6.3.20. Operational checks
• 1.6.4. Scheduled Maintenance
• 1.6.4.1. General Maintenance Information
• 1.6.4.2. Sideshifter Maintenance Intervals
• 1.6.4.3. Scheduled Maintenance Summary
• 1.6.4.4. Maintenance at 1000 hours
• 1.6.4.5. Maintenance at 3000 hours
• 1.6.4.6. Maintenance at 6000 hours
• 1.6.4.7. Sideshifter Maintenance (optional equipment)
• 1.6.5. Fluids and Lubricants
• 1.6.5.1. Capacities
• 1.6.5.2. Fuel
• 1.6.5.3. Fluid and Lubricant Specifications
• 1.6.6. Troubleshooting
• 1.6.6.1. Fuses
• 1.6.6.2. Diagnostic Connector
• 1.6.6.3. Jump Starting
• 1.6.6.4. Fault Indicator Explanations
• 1.6.6.5. Engine Protection System (optional equipment)
• 1.6.6.6. Troubleshooting Chart Engine
• 1.6.6.7. Troubleshooting Chart Hydraulic System
• 1.6.6.8. Troubleshooting the LP Level Display System (optional equipment)
• 1.7. Technical data
• 1.7.1. Specifications
• 1.7.2. Mast Heights
• 1.7.3. Noise Emission Values
• 1.7.4. Vibration Data