Linde 318-01 – C90 Operating Instructions SN 09.08 and up

Description

• Model List:
  • C90

• 1. EHDC 80.3, C 80.4, C 80.5, C 80.6
• 1.1. Table of content
• 1.2. Electric circuit schematics
• 1.2.1. Cummins engine electrical circuit
• 1.2.1.1. Cummins engine electrical circuit drawing
• 1.2.2. Electrical drawing Cummins fault code list
• 1.2.2.1. Cummins fault code list
• 1.2.3. Electrical drawing
• 1.2.3.1. Electrical Circuit
• 1.2.4. Elme electrical circuit
• 1.2.4.1. Elme electrical schematic
• 1.3. Hydraulic circuit
• 1.3.1. Hydraulic layout drawing
• 1.3.1.1. Hydraulic circuit
• 1.3.2. Elme hydraulic circuit
• 1.3.2.1. Elme hydraulic schematic
• 2. Arctic oils supplement357 05, 318
• 2.1. Table of content
• 2.2. Information
• 2.2.1. Arctic Oils Information
• 3. Container Handler318_C905, 318_C906, 318_C907, 318_C908
• 3.1. Table of content
• 3.2. Introduction
• 3.2.1. Your Linde truck
• 3.2.2. Technical description
• 3.2.3. Intended use
• 3.2.4. Improper use
• 3.2.5. Symbols used
• 3.2.6. Commissioning
• 3.2.7. Truck takeover
• 3.2.8. EC declaration of conformity
• 3.3. Safety
• 3.3.1. Safety rules
• 3.3.1.1. Safety rules
• 3.3.1.2. Residual risks
• 3.3.1.3. Stability
• 3.3.2. Frequency characteristic for human body vibrations
• 3.3.2.1. Frequency characteristic for human body vibrations
• 3.3.3. Noise emission data
• 3.3.3.1. Noise emission data
• 3.4. Overview
• 3.4.1. General view
• 3.4.2. Type plates
• 3.4.3. Controls and indicators
• 3.4.4. Controls and indicators
• 3.5. Operation
• 3.5.1. Wheel removal drive axle
• 3.5.2. Wheel removal steer axle
• 3.5.3. Wheel assembly inspection
• 3.5.4. Wheel refitting drive axle
• 3.5.5. Wheel refitting steer axle
• 3.5.6. Examples of restraining devices
• 3.5.7. Mirrors
• 3.5.8. Beginning operation
• 3.5.9. Opening the right hand side window
• 3.5.10. Emergency exit
• 3.5.11. Setting the clock
• 3.5.12. Cab interior light
• 3.5.13. Hazard warning lights, Turn indicators lights, Horn
• 3.5.14. Heater, Climate control
• 3.5.15. Adjusting the drivers seat
• 3.5.16. To turn on the road lights
• 3.5.17. Operating the windscreen wipers
• 3.5.18. Filling the windscreen washer bottle
• 3.5.19. Control levers (joysticks)
• 3.5.20. Engine Access
• 3.5.21. Engine oil level check
• 3.5.22. Checking the fuel
• 3.5.23. Checking the coolant level in the reservoir
• 3.5.24. Check the tyres for damage and foreign objects
• 3.5.25. Battery access opening
• 3.5.26. Isolating the battery
• 3.5.27. Fuses
• 3.5.28. Working hydraulics filter panel removal
• 3.5.29. Hydraulic system oil level check
• 3.5.30. Starting the engine double pedal models
• 3.5.31. Driving Double pedal models
• 3.5.32. Stopping the engine double pedal models
• 3.5.33. Starting the engine Single pedal models
• 3.5.34. Driving single pedals
• 3.5.35. Stopping the Engine Single pedal models
• 3.5.36. Malfunctions during operation
• 3.5.37. Steering
• 3.5.38. Braking system
• 3.5.39. Installation of additional equipment
• 3.5.40. Before lifting a load
• 3.5.41. Double container handling operation
• 3.5.42. Lifting a load
• 3.5.43. Travelling with load
• 3.5.44. Depositing the load
• 3.5.45. Before leaving the truck unattended
• 3.5.46. Trailer coupling
• 3.5.47. Locations for jacks when changing wheels
• 3.5.48. Towing
• 3.5.49. Measures before taking the truck out of operation
• 3.5.50. Putting the truck back into operation
• 3.5.51. Optional equipment
• 3.6. Maintenance
• 3.6.1. General remarks
• 3.6.1.1. Wheel removal drive axle
• 3.6.1.2. Wheel removal steer axle
• 3.6.1.3. Wheel assembly inspection
• 3.6.1.4. Wheel refitting drive axle
• 3.6.1.5. Wheel refitting steer axle
• 3.6.1.6. Examples of restraining devices
• 3.6.1.7. General information
• 3.6.1.8. Work on the mast and the front part of the truck
• 3.6.1.9. Filling capacity.rated values
• 3.6.1.10. Fuel and oil recommendations
• 3.6.1.11. Diesel fuel
• 3.6.1.12. Check the condition of structured components
• 3.6.1.13. Truck welds inspection
• 3.6.1.14. Checks various
• 3.6.2. Inspection and maintenance schedule
• 3.6.2.1. As required Service plan
• 3.6.2.2. h Service plan
• 3.6.2.3. h Service plan
• 3.6.2.4. h Service plan
• 3.6.2.5. h Service plan
• 3.6.2.6. h Service plan
• 3.6.2.7. h Service plan
• 3.6.2.8. h Service plan
• 3.6.3. Engine
• 3.6.3.1. Engine oil level check
• 3.6.3.2. Change the engine oil (every 12 months minimum)
• 3.6.3.3. Clean the fuel filter
• 3.6.3.4. Change the fuel prefilter with water monitor
• 3.6.3.5. Check the condition of the Vbelt
• 3.6.3.6. Check the condition of the drive belt
• 3.6.3.7. Check the cooling fan belt tensioner
• 3.6.3.8. Check the engine mounting for condition and security
• 3.6.3.9. Check intake and exhaust systems for leaks and security
• 3.6.3.10. Check the air filter
• 3.6.3.11. Renew the safety element
• 3.6.3.12. Check coolant strength
• 3.6.3.13. Renew engine coolant
• 3.6.3.14. Clean the radiator and oil cooler, check for leaks
• 3.6.3.15. Check the vibration damper
• 3.6.3.16. Check valve clearances
• 3.6.4. Gearbox
• 3.6.4.1. Final drive oil level check
• 3.6.4.2. Change final drive hub oil
• 3.6.5. Chassis bodywork and fittings
• 3.6.5.1. Clean the truck
• 3.6.5.2. Check seat belt for condition and correct operation
• 3.6.5.3. Mirrors
• 3.6.5.4. Check the tyres for damage and foreign objects
• 3.6.5.5. Check the cab mountings
• 3.6.6. Chassis frame
• 3.6.6.1. Check the security of the axle clamp and drive motors
• 3.6.6.2. Clean and lubricate the steer axle
• 3.6.7. Controls
• 3.6.7.1. Brake control mechanism
• 3.6.7.2. Check the parking brake for proper operation
• 3.6.8. Electrics
• 3.6.8.1. Check the batteries.
• 3.6.9. Hydraulics
• 3.6.9.1. Check the hydraulic tank breather filter
• 3.6.9.2. Hydraulic system oil level check
• 3.6.9.3. Renew hydraulic oil of working hydraulic system
• 3.6.9.4. Renew the main hydraulic system oil return line filters
• 3.6.9.5. Check the tension of double hoses
• 3.6.10. Load lift system
• 3.6.10.1. Lubricate the mast and tilt cylinder pivots
• 3.6.10.2. Lubricate the spreader
• 3.6.10.3. Check and adjust mast chains, lubricate with chain spray
• 3.6.10.4. Renewing the lift chains (at least every 6000h, 3 years and when 2 stretch has been attained)
• 3.6.10.5. Renewing the twistlocks
• 3.6.11. Troubleshooting
• 3.6.11.1. Troubleshooting guide (Diesel engine)
• 3.6.11.2. Troubleshooting guide (Hydraulic system)
• 3.6.12. User manual feedback
• 3.6.12.1. User manual improvement record.
• 3.7. Technical data
• 4. Double container handling override function
• 4.1. Table of content
• 4.2. Operation
• 4.2.1. Double handling override
• 4.3. Installation
• 4.3.1. Fitting the kit
• 4.3.2. Electrical installation.
• 4.3.3. Hydraulic installation.
• 4.4. Schematic diagrams
• 4.5. Photographs
• 5. Load lift system lubrication supplement
• 5.1. Table of content
• 5.2. Load lift system lubrication
• 5.2.1. Scheduled maintenance intervals
• 5.2.2. Load lift device service plan
• 5.2.3. Check and adjust mast chains, lubricate with chain spray
• 5.2.4. Lubricate the spreader
• 5.2.5. Lubricate the mast and tilt cylinder pivots
• 5.2.6. Load lift device lubrication information