Linde 335-01 – E14, E16, E16C, E18C, E18P, E20P Spare Parts Manual SN 09.95 and up SN up to 11.99

Description

• Model List:
  • E14
  • E16
  • E16C
  • E18C
  • E18P
  • E20P

• 1. E14.16.18.20
• 1.1. POWER UNIT ENGINE EXECUTION
• 1.1.1. DRIVE MOTOR
• 1.2. DRIVE TRANSMISSION
• 1.2.1. WHEEL DRIVE
• 1.3. CHASSIS, BODYWORK AND FITTINGS
• 1.3.1. CHASSIS,OVERHEAD GUARD AND COUNTERWEIGHT
• 1.3.2. HOOD AND COVERINGS
• 1.3.3. SEAT SUPPORT AND DRIVERS SEAT
• 1.3.4. CABIN
• 1.3.5. HEATER
• 1.4. STEERING AND WHEELS
• 1.4.1. STEERING AXLE E14.E16.E16C 04.97
• 1.4.2. STEERING AXLE E14.E16.E16C 05.97
• 1.4.3. STEERING AXLE E16P,E18P,E20P
• 1.4.4. HYDROSTATIC STEERING WITH LINES
• 1.4.5. WHEELS AND TYRES
• 1.5. CONTROLS
• 1.5.1. TRAVEL ACTUATING AND BRAKING CONTROL
• 1.5.2. SINGLE PEDAL VERSION
• 1.5.3. ACTUATOR OF PILOT VALVE
• 1.6. ELECTRIC EQUIPMENT
• 1.6.1. ELECTRIC ARMATURES, BATTERY AND CABLES
• 1.6.2. MAIN CABLE LOOM 01.97
• 1.6.3. MAIN CABLE LOOM 02.97
• 1.6.4. SET CABLE
• 1.6.5. VARIOUS CABLE LOOMS
• 1.6.6. TRUCK LIGHTING
• 1.6.7. TRUCK LIGHTING VERSION JAPAN
• 1.6.8. SPOT LIGHT
• 1.6.9. WIRING HARNESSES FOR LIGHTING AND SPOT LIGHT
• 1.6.10. HARNESS FOR LIGHTING VERSION JAPAN
• 1.7. HYDRAULIC UNIT
• 1.7.1. CONTROL VALVE AND LINES
• 1.7.2. HYDRAULIC PUMP,OIL TANK, FILTER AND LINES
• 1.7.3. PUMP MOTOR
• 1.7.4. TILT CYLINDER
• 1.8. MAST ASSEMBLY AND AUXILIARY HYDRAULIC SE
• 1.8.1. STANDARD MAST TYPE 180, FORK CARRIAGE AND FORK ARMS up to 07.98
• 1.8.2. STANDARD MAST TYPE 180, FORK CARRIAGE AND FORK ARMS 08.98 and up
• 1.8.3. DUPLEX MAST TYPE 180 up to 07.98
• 1.8.4. DUPLEX MAST TYPE 180 08.98 and up
• 1.8.5. TRIPLEX MAST TYPE 180 up to 07.98
• 1.8.6. TRIPLEX MAST TYPE 180 08.98 and up
• 1.8.7. LIFT CYLINDER FOR MAST LIFT TYPE 180 07.98
• 1.8.8. LIFT CYLINDER FOR MAST LIFT TYPE 180 08.98 and up
• 1.8.9. AUXILIARY HYDRAULICS FOR STANDARD MAST TYPE 180 07.98
• 1.8.10. AUXILIARY HYDRAULICS FOR STANDARD MAST TYPE 180 08.98
• 1.8.11. AUXILIARY HYDRAULICS FOR DUPLEX MAST TYPE 180 09.97
• 1.8.12. AUXILIARY HYDRAULICS FOR DUPLEX MAST TYPE 180 10.97 07.98
• 1.8.13. AUXILIARY HYDRAULICS FOR DUPLEX MAST TYPE 180 08.98
• 1.8.14. AUXILIARY HYDRAULICS FOR TRIPLEX MAST TYPE 180 (VERSION HOSE REEL) to series
• 1.8.15. AUXILIARY HYDRAULICS FOR TIPLEX MAST TYPE 180 (VERSION NW6)from series 10.96
• 1.8.16. AUXILIARY HYDRAULICS FOR TIPLEX MAST TYPE 180 (VERSION NW8)from series 12.97)
• 1.8.17. AUXILIARY HYDRAULICS FOR TIPLEX MAST TYPE 180 (NW 8) from series 08.98
• 1.8.18. SIDESHIFT FOR STANDARD MAST TYPE 180
• 1.8.19. SIDESHIFT FOR DUPLEX MAST TYPE 180
• 1.8.20. SIDESHIFT FOR TRIPLEX MAST TYPE 180
• 1.9. SPECIAL EQUIPMENTS
• 1.9.1. LOAD BACKREST FOR MAST TYPE 180
• 1.10. Miscellaneous
• 1.10.1. PLATES
• 1.10.2. OPERATING MATERIAL