Linde 351-05 – H25D, H25T, H30D Production site Xiamen Operating Instructions SN 07.08 and up

Description

• Model List:
  • H25D
  • H25T
  • H30D

• 1. Diesel truckH25D05, H30D05
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Your truck
• 1.2.2. Proper use
• 1.2.3. Impermissible use
• 1.2.4. Description of use and climatic condition
• 1.2.5. Modifications to the truck
• 1.2.6. Symbols used
• 1.2.7. Technical description
• 1.2.8. Truck takeover
• 1.2.9. Legal requirements for marketing
• 1.2.10. Service plan before initial commissioning
• 1.3. Safety
• 1.3.1. Safety guidelines
• 1.3.2. Residual risks
• 1.3.3. Stability
• 1.3.4. In the case of tipover
• 1.3.5. Handling consumables
• 1.3.6. Competent person
• 1.3.7. Operation of industrial trucks in plant area
• 1.3.8. Periodic safety inspection
• 1.4. Overview
• 1.4.1. Type plates
• 1.4.2. General view
• 1.4.3. Controls and indicators
• 1.4.4. Composite instrument
• 1.5. Operation
• 1.5.1. Runningin instructions
• 1.5.2. Preshiftchecks
• 1.5.3. Pre shift checks
• 1.5.3.1. Opening the engine cover
• 1.5.3.2. Checking the fuel level
• 1.5.3.3. Filling with fuel
• 1.5.3.4. Checking the engine oil level
• 1.5.3.5. Checking the tyre pressure
• 1.5.3.6. Applying the seat belt
• 1.5.3.7. Adjusting the operator seat
• 1.5.4. Two pedal operation
• 1.5.4.1. Starting the engine
• 1.5.4.2. Cold start (option)
• 1.5.4.3. Stopping the engine
• 1.5.4.4. Malfunctions during operation
• 1.5.4.5. Driving
• 1.5.5. Single pedal operation
• 1.5.5.1. Starting the engine
• 1.5.5.2. Cold start (option)
• 1.5.5.3. Stopping the engine
• 1.5.5.4. Malfunctions during operation
• 1.5.5.5. Driving
• 1.5.6. Steering
• 1.5.7. Service brake
• 1.5.8. Parking brake
• 1.5.9. Lifting device and attachments (centrallever control)
• 1.5.10. Lifting device and attachments (singlelever control)
• 1.5.11. Windscreen wipers, lighting, working lights, Direction indicators (options)
• 1.5.12. Heater (option)
• 1.5.13. Horn
• 1.5.14. Data logger (option)
• 1.5.15. Working with loads
• 1.5.15.1. Before lifting a load
• 1.5.15.2. Adjusting the fork spread
• 1.5.15.3. Picking up a load
• 1.5.15.4. Travel with a load
• 1.5.15.5. Unloading
• 1.5.15.6. Before leaving the truck
• 1.5.15.7. Trailer coupling
• 1.5.16. Loading.Transporting
• 1.5.16.1. Transport with a lorry or lowloader
• 1.5.16.2. Hoisting the truck with a crane
• 1.5.16.3. Hoisting the truck with the eyebolts (option)
• 1.6. Maintenance
• 1.6.1. General information
• 1.6.2. Work on the mast and on the front part of the truck
• 1.6.3. Inspection and maintenance data
• 1.6.4. Recommendations for consumables
• 1.6.5. Inspection and maintenance overview
• 1.6.5.1. h Service plan
• 1.6.5.2. h service plan
• 1.6.5.3. h service plan
• 1.6.5.4. h service plan
• 1.6.5.5. h service plan
• 1.6.5.6. h service plan
• 1.6.5.7. h service plan
• 1.6.6. Engine
• 1.6.6.1. Cleaning the air filter
• 1.6.6.2. Renewing the safety element (option)
• 1.6.6.3. Checking the dust discharge valve
• 1.6.6.4. Cleaning the prefilter (option)
• 1.6.6.5. Regenerate the soot particulate filter variant I (option)
• 1.6.6.6. Regenerate the soot particulate filter variant II (option)
• 1.6.6.7. Clean and check the radiator and hydraulic oil cooler for leaks
• 1.6.6.8. Drain the fuel system water preseparator
• 1.6.6.9. Renew the engine oil
• 1.6.6.10. Renew the fuel filter
• 1.6.6.11. Renew the engine oil filter cartridge
• 1.6.6.12. Renew the fuel system water preseparator
• 1.6.6.13. Bleed the fuel system
• 1.6.6.14. Check and adjust valve clearance
• 1.6.6.15. Check the mounting of the compact axle at the engine
• 1.6.6.16. Checking the soot particulate filter system (option)
• 1.6.6.17. Renew the air filter element, check the vacuum switch
• 1.6.6.18. Check the engine mounting for condition and tightness
• 1.6.6.19. Check the air intake and exhaust pipes for leaks
• 1.6.6.20. Check the soot particulate filter system (option) (variant II)
• 1.6.6.21. Clean the fuel pump strainer
• 1.6.6.22. Check the Vbelt
• 1.6.6.23. Tighten the Vbelt
• 1.6.6.24. Check and adjust the timing belt and tension pulley
• 1.6.6.25. Check crankcase pressure vent valve
• 1.6.6.26. Check the injection nozzles
• 1.6.6.27. Renew the Vbelt
• 1.6.6.28. Renew the timing belt and tension pulley
• 1.6.6.29. Renew the injection nozzles
• 1.6.6.30. Renew the engine mountings
• 1.6.7. Chassis, bodywork and fittings
• 1.6.7.1. Clean the lift truck
• 1.6.7.2. Check seat belt for condition and proper operation
• 1.6.7.3. Check the mounting of the engine, counterweight, overhead guard, steering axle, tilt cylinder and wheel drives for tightness
• 1.6.7.4. Check and oil other pivots and joints
• 1.6.8. Undercarriage
• 1.6.8.1. Wheel change
• 1.6.8.2. Tighten the wheel fasteners
• 1.6.8.3. Check the tyres for damage and foreign objects
• 1.6.8.4. Lubricate the steer axle, mast and tilt cylinder bearings
• 1.6.8.5. Clean and grease the steering axle
• 1.6.9. Controls
• 1.6.9.1. Check and oil the pedals, travel control and engine control linkages
• 1.6.9.2. Check the parking brake handle and cable
• 1.6.9.3. Check the parking brake
• 1.6.10. Electrics
• 1.6.10.1. Check electric cables, cable connectors and connections for condition and tightness
• 1.6.10.2. Battery Check condition, electrolyte level and specific gravity
• 1.6.11. Hydraulics
• 1.6.11.1. Check the hydraulic system oil level
• 1.6.11.2. Check the pretension of double hoses if attachments are fitted
• 1.6.11.3. Check the hydraulic system, compact axle, pumps, valves and lines for leaks
• 1.6.11.4. Renew the pressure filter
• 1.6.11.5. Renew the suction filter
• 1.6.11.6. Renew the breather filter
• 1.6.11.7. Renew the hydraulic oil
• 1.6.12. Load lift system
• 1.6.12.1. Grease the mast and tilt cylinder bearings
• 1.6.12.2. Cleaning and spraying the mast chain
• 1.6.12.3. Clean and lubricate the sideshift (option), check the fasteners
• 1.6.12.4. Check the forks and fork quickreleases
• 1.6.12.5. Check the mast, lift chains and stops for condition, mounting and operation
• 1.6.12.6. Adjust the lift chain length (standard mast)
• 1.6.12.7. Adjust the lift chain length (Duplex and Triplex masts)
• 1.6.13. Troubleshooting
• 1.6.13.1. Fuses
• 1.6.13.2. Fuses, soot particulate filter system (option)
• 1.6.13.3. Emergency exit for trucks with rear windscreen
• 1.6.13.4. Towing instructions
• 1.6.13.5. Taking the truck out of operation
• 1.6.13.6. Troubleshooting guide (Diesel engine)
• 1.6.13.7. Troubleshooting guide (hydraulic system)
• 1.7. Technical data
• 1.7.1. Type sheet H 25
• 1.7.2. Type sheet H 30
• 1.7.3. Load diagrams and lift mast data
• 1.7.4. Noise emission levels
• 1.8. Circuit diagrams
• 1.8.1. Wiring diagrams
• 1.8.1.1. Basic equipment
• 1.8.1.2. Wiring diagram (lighting)
• 1.8.2. Hydraulic diagrams
• 1.8.2.1. Traction, working and steering hydraulics
• 2. Operating Instruction (DataLogger)
• 3. Operating Instruction (T)