Name: Linde 351-05 - H25D, H25T, H30D Production site Xiamen Workshop Manuals SN 07.08 and up
Price: 50.00 USD
Availability: InStock

Description

Model List:
- H25D
- H25T
- H30D

1. Regular testing
1.1. Table of content
1.2. Regular testing
1.3. Electric motor
1.4. Internal combustion engine
1.5. Drive axle
1.6. Chassis
1.7. Drivers compartment
1.8. Steering systems
1.9. Wheels and tyres
1.10. Brake system
1.11. Operating devices
1.12. Electrics.electronics
1.13. Hydraulics
1.14. Lift mast
1.15. Load support
1.16. Attachments
1.17. Special equipment.accessories
2. Service case Release tools for contacts
2.1. Table of content
2.2. Safety information
2.3. Information
2.4. Overview
2.5. Plug systems
3. Steering axle crimping tool
3.1. Table of content
3.2. Crimping tool
3.3. Replacement kits
3.4. Steering axle 301.302.303
3.5. Steering axle 1601
3.6. Steering axle 1602.1603
4. Deutz engine
4.1. Frontpage
4.2. Table of contents
4.3. Checking the compression pressure
4.4. Mounting engine on assembly block and demounting
4.5. Setting valve clearance
4.6. Removing and installing the rocker arm and rocker arm bracket
4.7. Disassembling, assembling and checking the rocker arm and rocker arm bracket
4.8. Removing and installing cylinder head
4.9. Checking piston overhang
4.10. Removing and installing the crankcase bleeding
4.11. Removing and installing the exhaust line
4.12. Removing and install the charge air line
4.13. Removing and installing the turbocharger
4.14. Removing and installing the intake manifold
4.15. Removing and installing the exhaust gas return valve
4.16. Removing and installing the exhaust gas return pipe
4.17. Removing and installing the exhaust gas collection pipe (Exhaust gas recirculation)
4.18. Removing and installing the lifting magnet (Start amount release)
4.19. Renewing the injection lines
4.20. Removing and installing the fuel injectors
4.21. Removing and installing the lifting magnet (charge air pressuredependent full load stop)
4.22. Installing and removing charge air pressuredependent full load stop
4.23. Removing and installing fuel pipes
4.24. Removing and installing the fuel filter console
4.25. Removing and installing the fuel supply pump
4.26. Removing and installing the lubricating oil cooler
4.27. Removing and installing the oil filter console
4.28. Removing and installing the oil pressure switch
4.29. Removing and installing the thermostat (Lubricating oil cooler)
4.30. Removing and installing the control line
4.31. Removing and installing the coolant pump
4.32. Checking the thermostat (in the removed state)
4.33. Removing and installing the thermostat
4.34. Removing and installing the thermostat housing
4.35. Removing and installing temperature transmitter
4.36. Removing and installing the lifting magnet (Engine shutdown)
4.37. Removing and installing the Vbelt pulley
4.38. Renew Vbelts, check Vbelt tension
4.39. Removing and installing the flywheel
4.40. Removing and installing the hydraulic pump
4.41. Removing and installing the generator
4.42. Removing and installing the starter
4.43. Removing and installing the heating plugs
4.44. Removing and installing the glow plug
4.45. Standard tools
4.46. Special tools
5. IC Engined Truck H25.30 D05
5.1. Frontpage
5.2. Table of contents
5.3. Checking the compression pressure
5.4. Mounting engine on assembly block and demounting
5.5. Setting valve clearance
5.6. Removing and installing the rocker arm and rocker arm bracket
5.7. Disassembling, assembling and checking the rocker arm and rocker arm bracket
5.8. Removing and installing cylinder head
5.9. Checking piston overhang
5.10. Removing and installing the crankcase bleeding
5.11. Removing and installing the exhaust line
5.12. Removing and install the charge air line
5.13. Removing and installing the turbocharger
5.14. Removing and installing the intake manifold
5.15. Removing and installing the exhaust gas return valve
5.16. Removing and installing the exhaust gas return pipe
5.17. Removing and installing the exhaust gas collection pipe (Exhaust gas recirculation)
5.18. Removing and installing the lifting magnet (Start amount release)
5.19. Renewing the injection lines
5.20. Removing and installing the fuel injectors
5.21. Removing and installing the lifting magnet (charge air pressuredependent full load stop)
5.22. Installing and removing charge air pressuredependent full load stop
5.23. Removing and installing fuel pipes
5.24. Removing and installing the fuel filter console
5.25. Removing and installing the fuel supply pump
5.26. Removing and installing the lubricating oil cooler
5.27. Removing and installing the oil filter console
5.28. Removing and installing the oil pressure switch
5.29. Removing and installing the thermostat (Lubricating oil cooler)
5.30. Removing and installing the control line
5.31. Removing and installing the coolant pump
5.32. Checking the thermostat (in the removed state)
5.33. Removing and installing the thermostat
5.34. Removing and installing the thermostat housing
5.35. Removing and installing temperature transmitter
5.36. Removing and installing the lifting magnet (Engine shutdown)
5.37. Removing and installing the Vbelt pulley
5.38. Renew Vbelts, check Vbelt tension
5.39. Removing and installing the flywheel
5.40. Removing and installing the hydraulic pump
5.41. Removing and installing the generator
5.42. Removing and installing the starter
5.43. Removing and installing the heating plugs
5.44. Removing and installing the glow plug
5.45. Standard tools
5.46. Special tools
6. connectdesk
6.1. Table of content
6.2. Introduction
6.3. System overview
6.4. Hardware
6.5. Software
6.6. Status checking (PreOpCheck)
7. connectportal
7.1. Table of content
7.2. Introduction
7.3. Data transfer
7.4. Hardware
7.5. Software
8. connectdt operating hoursRetrofitting the connectdt operating hours
8.1. Table of content
8.2. connectdt operating hours
9. connectdt trouble codesRetrofitting connectdt trouble codes
9.1. Table of content
9.2. connectdt trouble codes