Linde 396-02 – H50D, H50T, H60D, H60T, H70D, H70T, H80D, H80T Operating Instructions SN 07.12 and up SN up to 03.16

Description

• Model List:
  • H50D
  • H50T
  • H60D
  • H60T
  • H70D
  • H70T
  • H80D
  • H80T

• 1. Customised optionsH50D02, H60D02, H70D02, H80D02
• 1.1. Table of content
• 1.2. Driving speed reduction
• 1.2.1. Driving speed reduction
• 1.3. Reverse proximity alarm
• 1.3.1. Reverse proximity alarm
• 1.4. Lift height restriction
• 1.4.1. Lift height restriction
• 1.5. Battery main switch
• 1.5.1. Battery main switch
• 1.6. Customised key switch
• 1.6.1. Customised key switch
• 1.7. Quickrelease couplings
• 1.7.1. Quickrelease couplings for auxiliary hydraulics
• 1.8. Heated outside mirrors
• 1.8.1. Heated outside mirrors
• 1.9. Switchoff delay for electrical equipment
• 1.9.1. Switchoff delay for electrical equipment
• 1.10. V, 7pin socket for trailer lighting
• 1.10.1. V, 7pin socket for trailer lighting
• 1.11. Auxiliary heater
• 1.11.1. Auxiliary heater
• 1.12. Buckle monitoring
• 1.12.1. Buckle monitoring on seat belt
• 1.13. Door monitoring
• 1.13.1. Door monitoring
• 1.14. Trailer coupling
• 1.14.1. Trailer coupling
• 1.15. Horn in foot well
• 1.15.1. Horn in foot well
• 2. Customised optionsH50T02, H60T02, H70T02, H80T02
• 2.1. Table of content
• 2.2. Driving speed reduction
• 2.2.1. Driving speed reduction
• 2.3. Reverse proximity alarm
• 2.3.1. Reverse proximity alarm
• 2.4. Lift height restriction
• 2.4.1. Lift height restriction
• 2.5. Battery main switch
• 2.5.1. Battery main switch
• 2.6. Customised key switch
• 2.6.1. Customised key switch
• 2.7. Quickrelease couplings
• 2.7.1. Quickrelease couplings for auxiliary hydraulics
• 2.8. Heated outside mirrors
• 2.8.1. Heated outside mirrors
• 2.9. Switchoff delay for electrical equipment
• 2.9.1. Switchoff delay for electrical equipment
• 2.10. V, 7pin socket for trailer lighting
• 2.10.1. V, 7pin socket for trailer lighting
• 2.11. Auxiliary heater
• 2.11.1. Auxiliary heater
• 2.12. Buckle monitoring
• 2.12.1. Buckle monitoring on seat belt
• 2.13. Door monitoring
• 2.13.1. Door monitoring
• 2.14. Trailer coupling
• 2.14.1. Trailer coupling
• 2.15. Horn in foot well
• 2.15.1. Horn in foot well
• 3. Diesel truckH50D02, H60D02, H70D02, H80D02
• 3.1. Table of content
• 3.2. Introduction
• 3.2.1. Your forklift truck
• 3.2.2. Intended use
• 3.2.3. Impermissible use
• 3.2.4. Description of use and climatic conditions
• 3.2.5. Symbols used
• 3.2.6. Technical description
• 3.2.7. Taking delivery of the industrial truck
• 3.2.8. Customised options
• 3.2.9. Legal requirements for placing on the market
• 3.2.10. Disposing of components and batteries
• 3.3. Safety
• 3.3.1. Safety guidelines
• 3.3.2. Residual risks
• 3.3.3. Stability
• 3.3.4. In the case of tipover
• 3.3.5. Handling consumables
• 3.3.6. Competent person
• 3.3.7. Periodic safety inspection
• 3.3.8. Fit attachments
• 3.3.9. Emergency exit with attached rear window
• 3.3.10. Emergency lowering
• 3.3.11. Towing
• 3.4. Overview
• 3.4.1. Identification plates
• 3.4.2. Truck overview
• 3.4.3. Controls
• 3.4.4. Display unit
• 3.4.5. Switch panel
• 3.5. Operation
• 3.5.1. Service plan before initial commissioning
• 3.5.2. Instructions for runningin
• 3.5.3. Preshift checks
• 3.5.4. Regular maintenance
• 3.5.5. Standard equipment
• 3.5.6. Special equipment
• 3.5.7. Working with a load
• 3.5.8. Before leaving the truck
• 3.5.9. Loading.transporting
• 3.6. Maintenance
• 3.6.1. Safety information regarding servicing work
• 3.6.2. Overview of the filling quantities and set values
• 3.6.3. Recommendations for consumables
• 3.6.4. Service plan
• 3.6.5. Engine
• 3.6.6. Gearbox
• 3.6.7. Chassis, bodywork and fittings
• 3.6.8. Chassis frame
• 3.6.9. Operating devices
• 3.6.10. Electrics
• 3.6.11. Hydraulics
• 3.6.12. Load lift system
• 3.6.13. Selfhelp
• 3.6.14. Shutting down
• 3.7. Technical data
• 3.7.1. Overview of dimensions
• 3.7.2. Overview of type sheets
• 3.7.3. Lift mast data type 195
• 3.7.4. Truck configuration
• 3.7.5. Tyre variants and rim sizes
• 3.7.6. Additional capacity rating plate for attachments
• 3.7.7. Noise emission values
• 3.7.8. Vibration characteristic values for bodily vibrations
• 4. LPG truckH50T02, H60T02, H70T02, H80T02
• 4.1. Table of content
• 4.2. Introduction
• 4.2.1. Your forklift truck
• 4.2.2. Intended use
• 4.2.3. Impermissible use
• 4.2.4. Description of use and climatic conditions
• 4.2.5. Symbols used
• 4.2.6. Technical description
• 4.2.7. Taking delivery of the industrial truck
• 4.2.8. Customised options
• 4.2.9. Legal requirements for placing on the market
• 4.2.10. Disposing of components and batteries
• 4.3. Safety
• 4.3.1. Safety guidelines
• 4.3.2. Residual risks
• 4.3.3. Stability
• 4.3.4. In the case of tipover
• 4.3.5. Handling consumables
• 4.3.6. Competent person
• 4.3.7. Periodic safety inspection
• 4.3.8. Safety information on the LPG system
• 4.3.9. Safety guidelines for LPG (extract)
• 4.3.10. Safety measures when working on ignition systems
• 4.3.11. Fit attachments
• 4.3.12. Emergency exit with attached rear window
• 4.3.13. Emergency lowering
• 4.3.14. Towing
• 4.4. Overview
• 4.4.1. Type plates
• 4.4.2. Truck overview
• 4.4.3. Controls
• 4.4.4. Display unit
• 4.4.5. Switch panel
• 4.5. Operation
• 4.5.1. Service plan before initial commissioning
• 4.5.2. Instructions for runningin
• 4.5.3. Preshift checks
• 4.5.4. Regular maintenance
• 4.5.5. Standard equipment
• 4.5.6. Special equipment
• 4.5.7. Working with a load
• 4.5.8. Before leaving the truck
• 4.5.9. Loading.transporting
• 4.6. Maintenance
• 4.6.1. Safety information regarding servicing work
• 4.6.2. Overview of the filling quantities and set values
• 4.6.3. Recommendations for consumables
• 4.6.4. Service plan
• 4.6.5. Engine
• 4.6.6. Gearbox
• 4.6.7. Chassis, bodywork and fittings
• 4.6.8. Chassis frame
• 4.6.9. Operating devices
• 4.6.10. Electrics
• 4.6.11. Hydraulics
• 4.6.12. Load lift system
• 4.6.13. Selfhelp
• 4.6.14. Shutting down
• 4.7. Technical data
• 4.7.1. Overview of dimensions
• 4.7.2. Overview of type sheets
• 4.7.3. Lift mast data type 195
• 4.7.4. Truck configuration
• 4.7.5. Tyre variants and rim sizes
• 4.7.6. Additional capacity rating plate for attachments
• 4.7.7. Noise emission values
• 4.7.8. Vibration characteristic values for bodily vibrations
• 5. Linde Safety Guard
• 5.1. Table of content
• 5.2. Introduction
• 5.2.1. Linde Safety Guard assistance system
• 5.2.2. Intended use
• 5.2.3. Declaration of conformity for radio equipment
• 5.2.4. Limitations for commissioning or for the permission to operate
• 5.2.5. Symbols used
• 5.3. Safety
• 5.3.1. Safety information
• 5.3.2. Service personnel
• 5.4. Operating devices and display elements
• 5.4.1. Overview
• 5.4.2. Safety Guard display unit Truck Unit
• 5.4.3. Safety Guard Truck Unit display unit for reach trucks
• 5.4.4. Safety Guard communication unit Truck Unit Small
• 5.4.5. Interactive warning vest
• 5.4.6. Mobile warning unit for the interactive warning vest Vest Unit
• 5.4.7. Power bank
• 5.4.8. Charging station for the power bank
• 5.4.9. Safety Guard portable warning unit Portable Unit
• 5.4.10. Safety Guard charging station
• 5.4.11. Safety Guard charging station from 10.2019
• 5.4.12. Safety Guard sensor
• 5.4.13. Safety Guard static warning unit Static Unit
• 5.4.14. Safety Guard Zone radio module Zone Marker
• 5.5. Operating
• 5.5.1. Installation
• 5.5.2. Preshift checks
• 5.5.3. Operation
• 5.6. Maintenance and disposal
• 5.6.1. Maintenance
• 5.6.2. Disposal
• 5.7. Technical data
• 5.7.1. Safety Guard display unit
• 5.7.2. Safety Guard active warning vest
• 5.7.3. Safety Guard mobile warning unit
• 5.7.4. Safety Guard sensor
• 5.7.5. Safety Guard communication unit
• 5.7.6. Safety Guard static warning unit
• 5.7.7. Safety Guard Zone radio module