Linde 5195-01 – R15SX to RTX22P Production site Xiamen Operating Instructions SN C15159J00001 and up

Description

• Model List:
  • R15SX
  • R17SX
  • R22SX
  • RTX15PD
  • RTX17
  • RTX17P
  • RTX22P

• 1. series Electric Reach TruckModels R17SX, R22SX, R15SXD North America
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Scope
• 1.2.2. Obligations of the Equipment Owner
• 1.2.3. Operator Responsibilities
• 1.2.4. Proper use
• 1.2.5. Hazard messages
• 1.3. Safety
• 1.3.1. Before Operation
• 1.3.2. Operator Daily Checklist
• 1.3.3. Operating Position
• 1.3.4. Pedestrians
• 1.3.5. Travel
• 1.3.6. Lifting and Lowering
• 1.3.7. Inclines, Ramps, Docks, Elevators
• 1.3.8. Avoiding Falls and Tipovers
• 1.3.9. Suspended Loads
• 1.3.10. Parking
• 1.3.11. Battery Safety
• 1.3.12. Safety During Maintenance
• 1.3.12.1. Personnel Qualifications
• 1.3.12.2. Hazardous Substances
• 1.3.13. Operator warning decals
• 1.3.13.1. Data plate
• 1.3.13.2. Operator warning decal
• 1.3.13.3. Trained operator warning decal
• 1.3.13.4. Test or service warning decal
• 1.3.13.5. Never stand or walk under forks warning decal
• 1.3.13.6. Voltage decal
• 1.3.13.7. Do not lift personnel warning decal
• 1.3.13.8. Crushed fingers warning decal
• 1.3.13.9. No step warning decal
• 1.3.13.10. Back up alarm warning decal
• 1.4. Overview
• 1.4.1. Technical Description
• 1.4.2. Truck Components
• 1.4.3. Display Unit
• 1.4.4. Controls
• 1.4.5. Decal and Data Plate Location
• 1.4.6. Data Plate
• 1.4.7. Definition of directions
• 1.5. Operation
• 1.5.1. Unloading and Preparing a New Truck for Operation
• 1.5.2. Steering Wheel Height Adjustment
• 1.5.3. Armrest Adjustment
• 1.5.4. Operating the Display Unit
• 1.5.5. Turning the Truck On and Off
• 1.5.6. Driving
• 1.5.7. Braking
• 1.5.8. Steering System
• 1.5.9. Horn
• 1.5.10. Emergency Stop Switch
• 1.5.11. Fork Position Adjustment
• 1.5.12. Hydraulic Controls
• 1.5.13. Tilt Memory (optional equipment)
• 1.5.14. Lift Limit Function (optional equipment)
• 1.5.15. Fan (optional equipment)
• 1.5.16. Lights and BackUp Alarm
• 1.5.17. Changing the Battery
• 1.5.18. Connecting the Battery to an External Charger
• 1.5.19. Manual Lowering of Fork Carriage
• 1.5.20. Towing the Truck
• 1.5.21. Securing the Truck for Transport
• 1.5.22. Hoisting the Truck
• 1.5.23. Long term storage
• 1.6. Maintenance
• 1.6.1. Personnel Qualifications
• 1.6.2. Cleaning
• 1.6.2.1. Cleaning the Truck
• 1.6.2.2. Cleaning the Lift Chains
• 1.6.3. Operator Inspection and Maintenance
• 1.6.3.1. Daily Inspection Overview
• 1.6.3.2. Daily Inspection Checklist
• 1.6.3.3. Check for fluid leakage
• 1.6.3.4. Check overhead guard
• 1.6.3.5. Check hydraulic cylinders
• 1.6.3.6. Check lift chains
• 1.6.3.7. Check fork carriage
• 1.6.3.8. Check battery retention
• 1.6.3.9. Check battery connector
• 1.6.3.10. Check hydraulic oil level
• 1.6.3.11. Check decal condition
• 1.6.3.12. Check Drive Wheel and Fasteners
• 1.6.3.13. Check all wheels for debris
• 1.6.3.14. Check multifunction handle bellows
• 1.6.3.15. Antistatic strap (optional equipment)
• 1.6.3.16. Operational checks
• 1.6.4. Routine Lubrication and Inspection
• 1.6.4.1. Routine Lubrication and Inspection Intervals
• 1.6.4.2. Testing and Cleaning the Fans
• 1.6.4.3. Checking Gear Oil Level
• 1.6.4.4. Checking Pedals
• 1.6.4.5. Hydraulic Tank Pressure Valve Test
• 1.6.4.6. Lubricate Steering Gear
• 1.6.4.7. Lift Chain Lubrication and Length Inspection
• 1.6.4.8. Mast Roller Lubrication and Inspection
• 1.6.4.9. Caster Wheel Inspection and Lubrication
• 1.6.4.10. Lubricate Load Wheel Axles
• 1.6.4.11. Lubricating the Reach Unit and Sideshifter
• 1.6.5. Scheduled Maintenance
• 1.6.5.1. General Maintenance Information
• 1.6.5.2. Scheduled Maintenance Chart
• 1.6.6. Fluids and Lubricants
• 1.6.6.1. Capacities
• 1.6.6.2. Fluid and Lubricant Specifications
• 1.6.7. Troubleshooting
• 1.6.7.1. Fuses
• 1.7. Specifications
• 1.7.1. Specifications
• 1.7.2. Mast Heights
• 2. Electric Reach TruckR15SX, R17SX24V, R17SX36V, R22SX
• 2.1. Table of content
• 2.2. Introduction and overview
• 2.2.1. Introduction
• 2.2.2. Intended use
• 2.2.3. Improper use
• 2.2.4. Additional information
• 2.2.5. Symbols used
• 2.2.6. Description of use and climatic conditions
• 2.2.7. Technical description
• 2.3. Safety
• 2.3.1. Safety guidelines
• 2.3.2. Residual risks
• 2.3.3. Stability
• 2.3.4. Handling consumables
• 2.3.5. EMC Electromagnetic compatibility
• 2.3.6. Regulations
• 2.3.7. Competent person
• 2.3.8. Noise level
• 2.3.9. Frequency characteristic for vibrations imparted to the human body
• 2.3.10. Emergency lowering
• 2.3.11. Releasing the parking brake
• 2.4. Truck overview
• 2.4.1. View of the truck
• 2.4.2. Identification plates and labels
• 2.4.3. Dataplates
• 2.4.4. Display unit
• 2.4.5. Setting the drive direction
• 2.5. Operation
• 2.5.1. Preliminary inspection
• 2.5.2. Battery
• 2.5.3. Adjusting the drivers armrest
• 2.5.4. Operating the display unit
• 2.5.5. Horn operation
• 2.5.6. Steering
• 2.5.7. Driving
• 2.5.8. Braking
• 2.5.9. Moving off on a ramp
• 2.5.10. Operating the lift mast and attachments
• 2.5.11. Transporting the truck
• 2.5.12. Towing procedure
• 2.5.13. Lift mast
• 2.5.14. Before leaving the machine
• 2.5.15. Fleet management system
• 2.5.16. Fleet management system (LFM Go.LKU10, option)
• 2.5.17. Use in cold stores
• 2.5.18. Taking the truck out of operation
• 2.6. Maintenance
• 2.6.1. Maintenance and safety instructions
• 2.6.2. General Knowledge
• 2.6.3. Recommended lubricants
• 2.6.4. Inspection and maintenance data
• 2.6.5. Preliminary inspection
• 2.6.6. Maintenance checklist to be completed after every 1000 hours of operation
• 2.6.7. Maintenance checklist to be completed after every 2000 hours of operation
• 2.6.8. Maintenance checklist to be completed after every 5000 hours of operation
• 2.6.9. Cleaning the truck
• 2.6.10. Checking the battery electrolyte level and specific gravity
• 2.6.11. Checking the battery and battery cables
• 2.6.12. Checking wheels and tyres
• 2.6.13. Checking fuses
• 2.6.14. Checking if the hydraulic hoses and pipe lines are damaged
• 2.6.15. Changing the hydraulic hoses and pipe lines
• 2.6.16. Check the hydraulic oil level
• 2.6.17. Changing the breather filter of the hydraulic oil tank
• 2.6.18. Changing the hydraulic oil and the suction filter
• 2.6.19. Changing the hydraulic oil pressure filter
• 2.6.20. Checking the brake system
• 2.6.21. Lubricating the drive motor and gearbox connections
• 2.6.22. Checking the condition and tightness of electrical connectors and cables
• 2.6.23. Stabilising wheel adjustment
• 2.6.24. Lubricating the lift chain and the lift mast guide slot
• 2.6.25. Adjusting the lift chain
• 2.6.26. Lubricating the fork carriage and sideshift slide
• 2.7. Technical datasheet
• 2.7.1. Technical datasheet