New Holland 25 Boomer Tier 3 Compact Tractor Operation and Maintenance Manual 48098985

Description

• Model List:
  • 25 Boomer Tier 3 Compact Tractor

• 1. GENERAL INFORMATION
• 1.1. Note to the owner
• 1.2. Intended use
• 1.3. ElectroMagnetic Compatibility (EMC)
• 1.4. Product Identification Number (PIN)
• 1.5. Operators manual storage
• 1.6. Machine orientation
• 2. SAFETY INFORMATION
• 2.1. Safety rules and signal word definitions
• 2.2. Safety rules
• 2.3. Starting up the machine safely
• 2.4. Stopping the machine safely
• 2.5. Do not operate tag
• 2.6. Ecology and the environment
• 2.7. Safety signs
• 2.8. Instructional signs
• 2.9. International symbols
• 2.10. Safety features
• 3. CONTROLS AND INSTRUMENTS
• 3.1. Access to operators platform
• 3.1.1. Access to operators platform
• 3.2. Operators seat
• 3.2.1. Seat belt
• 3.2.2. Mechanically adjusted operators seat
• 3.2.3. Roll Over Protective Structure (ROPS)
• 3.3. Forward controls
• 3.3.1. Instrument panel
• 3.3.2. Clutch pedal
• 3.3.3. Brake pedals
• 3.3.4. Park brake
• 3.3.5. Foot throttle pedal
• 3.3.6. Hand throttle lever
• 3.3.7. Power TakeOff (PTO) switch
• 3.3.8. Key switch
• 3.3.9. Differential lock pedal
• 3.3.10. Multifunction light switch
• 3.4. Lefthand side controls
• 3.4.1. Transmission range lever
• 3.4.2. Transmission range lever
• 3.4.3. FourWheel Drive (4WD)
• 3.5. Righthand side controls
• 3.5.1. Transmission main shift lever
• 3.5.2. Hydraulic Power Lift (HPL)
• 3.5.3. Hydraulic Power Lift (HPL) drop rate control valve
• 3.5.4. Rear remote hydraulic valve(s) (optional)
• 3.5.5. Mid mount two spool hydraulic valve (optional)
• 3.5.6. Power Take Off (PTO) Selection lever
• 3.6. Exterior controls
• 3.6.1. Hood latch
• 4. OPERATING INSTRUCTIONS
• 4.1. Commissioning the unit
• 4.1.1. Engine breakin procedure
• 4.1.2. Power Take Off (PTO)
• 4.1.3. Threepoint hitch
• 4.1.4. Threepoint hitch adjustments
• 4.1.5. Tractor drawbar
• 4.1.6. Hydraulic lift rocker
• 4.2. Starting the unit
• 4.2.1. Key switch
• 4.2.2. Cold starting aids
• 4.2.3. Starting the engine
• 4.2.4. Starting the tractor with jumper cables
• 4.3. Stopping the unit
• 4.3.1. Stopping the engine
• 4.3.2. Emergency stopping
• 4.3.3. Brakes
• 4.3.4. Park brake
• 4.4. Moving the unit
• 4.4.1. Steering operation
• 4.4.2. Transmission operation at low ambient temperatures
• 4.4.3. Mechanical transmission operation
• 4.5. Parking the unit
• 4.5.1. Parking the unit
• 5. TRANSPORT OPERATIONS
• 5.1. Road transport
• 5.1.1. Transport lighting
• 5.1.2. Hazard warning light operation
• 5.1.3. Turn signal operation
• 5.1.4. Work lights operation
• 5.1.5. Brake light operation
• 5.1.6. Rear work light (optional)
• 5.1.7. Driving the vehicle
• 5.2. Shipping transport
• 5.2.1. Carrying the tractor on a transporter
• 5.3. Recovery transport
• 5.3.1. Towing the tractor
• 6. WORKING OPERATIONS
• 6.1. General information
• 6.1.1. Tractor ballasting
• 6.1.2. Tractor ballasting weights
• 7. MAINTENANCE
• 7.1. General information
• 7.1.1. General information
• 7.1.2. Torque Minimum tightening torques for normal assembly
• 7.1.3. Standard torque data for hydraulics Standard torque data for hydraulics
• 7.1.4. Biodiesel fuel
• 7.1.5. General specification Diesel fuel
• 7.1.6. Refueling the tractor
• 7.1.7. Tractor jacking points
• 7.1.8. Fluids and lubricants
• 7.1.9. Capacities
• 7.1.10. Organic Acid Technology (OAT) coolant
• 7.1.11. Engine oils
• 7.2. Maintenance planning
• 7.2.1. Maintenance planning
• 7.3. Every 10 hours or daily
• 7.3.1. Engine oil level Check
• 7.3.2. Engine cooling system Check
• 7.4. After the first 50 hours of operation
• 7.4.1. Engine oil and oil filter Change
• 7.4.2. Fuel filter Replace
• 7.4.3. Hydraulic oil filter Replace
• 7.4.4. Roll Over Protective Structure (ROPS) Check
• 7.4.5. Wheel bolts and nuts Check
• 7.5. Every 50 hours
• 7.5.1. Grease fitting Lubrication
• 7.5.2. Transmission fluid level Check
• 7.5.3. Brake pedal free play Adjust
• 7.5.4. Fan belt Check
• 7.5.5. Tire pressure Check
• 7.5.6. Front axle differential fluid level Check
• 7.5.7. Air cleaner Clean
• 7.6. Every 100 hours
• 7.6.1. Fuel filter water separator Drain fluid
• 7.7. Every 300 hours
• 7.7.1. Engine oil and oil filter Change
• 7.7.2. Hydraulic oil filter Replace
• 7.7.3. Fuel filter Replace
• 7.7.4. Fan belt Adjust
• 7.7.5. Roll Over Protective Structure (ROPS) Check
• 7.7.6. Wheel bolts and nuts Check
• 7.7.7. Front wheel toe in Check
• 7.7.8. Air cleaner element Replace
• 7.8. Every 600 hours
• 7.8.1. Front axle differential oil Change fluid
• 7.8.2. Transmission fluid Change
• 7.9. Every 1000 hours
• 7.9.1. Engine coolant Change
• 7.10. General maintenance
• 7.10.1. Fuel injection system Bleed
• 7.10.2. Fuel injectors Bleed
• 7.10.3. Fan belt Adjust
• 7.10.4. Roll Over Protective Structure (ROPS) Check
• 7.10.5. Battery Test
• 7.10.6. Alternator and drive belt Check
• 7.10.7. Fuses Check
• 7.10.8. Maxi fuse Replace
• 7.10.9. Headlight bulb Replace
• 7.10.10. Tail/brake light bulb Replace
• 7.10.11. Turn signal/hazard light bulb Replace
• 7.10.12. Wheel bolt / nut Check
• 7.10.13. Front wheel toe in Check
• 7.10.14. Brake pedal free play Adjust
• 7.10.15. Clutch pedal free play Adjust
• 7.11. Storage
• 7.11.1. Preparing for storage
• 7.11.2. Removal from storage Tractor
• 8. TROUBLESHOOTING
• 8.1. Symptom(s)
• 8.1.1. Engine Troubleshooting
• 8.1.2. Hydraulic service brakes Troubleshooting
• 8.1.3. Regulated/Low pressure system Troubleshooting
• 8.1.4. Steering Troubleshooting
• 8.1.5. Electrical system Troubleshooting
• 9. SPECIFICATIONS
• 9.1. Tire inflation pressures
• 9.2. General specifications
• 9.3. Tractor dimensions
• 10. FORMS AND DECLARATIONS
• 10.1. Predelivery report Owner copy
• 10.2. Predelivery report Dealer copy