New Holland 30, 35 Boomer Stage IIIA Compact Tractor Operation and Maintenance Manual 51559570

Description

• Model List:
  • 30 Boomer Stage IIIA Compact Tractor
  • 35 Boomer Stage IIIA Compact Tractor

• 1. GENERAL INFORMATION
• 1.1. Note to the owner
• 1.2. Intended use
• 1.3. ElectroMagnetic Compatibility (EMC)
• 1.4. Manual scope and required training level
• 1.5. Metric and Imperial units abbreviations
• 1.6. Product Identification Number (PIN)
• 1.7. Operators manual storage
• 1.8. Machine orientation
• 2. SAFETY INFORMATION
• 2.1. Safety alert symbol and signal word definition
• 2.2. Safety rules
• 2.3. Starting the machine
• 2.4. Parking the machine
• 2.5. Ecology and the environment
• 2.6. Safety features
• 2.7. Safety aspects in accordance with Regulation (EU) 1322/2014 Annex XXII and subsequent amendments and modifications
• 2.8. Airborne noise emission
• 2.9. Exhaust emission levels
• 2.10. Vibration levels
• 2.11. Tractor jacking points
• 2.12. Machine stability
• 2.13. Safety signs
• 2.14. Instructional signs
• 2.15. International symbols
• 3. CONTROLS AND INSTRUMENTS
• 3.1. OPERATORS SEAT
• 3.1.1. Seat belt
• 3.1.2. Seat controls
• 3.1.3. Roll Over Protective Structure (ROPS) Rear mounted
• 3.1.4. Roll Over Protective Structure (ROPS) Front mounted
• 3.2. FORWARD CONTROLS
• 3.2.1. Instrument panel
• 3.2.2. Cruise control HydroStatic Transmission (HST) models
• 3.2.3. Transmission shuttle shift lever Mechanical transmission models
• 3.2.4. Clutch pedal
• 3.2.5. Brake pedals
• 3.2.6. Foot throttle pedal Mechanical transmission models
• 3.2.7. Hand throttle lever
• 3.2.8. Horn switch
• 3.2.9. Stationary Power TakeOff (PTO) switch
• 3.2.10. Power TakeOff (PTO) switch
• 3.2.11. Key switch
• 3.2.12. Hazard light switch
• 3.2.13. Differential lock lever Operating
• 3.2.14. HydroStatic Transmission (HST) foot pedals
• 3.2.15. Tilt steering lever
• 3.2.16. Multifunction light switch
• 3.3. LEFTHAND SIDE CONTROLS
• 3.3.1. Transmission range lever
• 3.3.2. Park brake
• 3.3.3. Frontwheel drive lever
• 3.3.4. Mid Power TakeOff (PTO) (optional)
• 3.4. RIGHTHAND SIDE CONTROLS
• 3.4.1. Hydraulic Power Lift (HPL)
• 3.4.2. Draft control
• 3.4.3. Rear remote control valve(s)
• 3.4.4. Twospool control valve optional
• 3.4.5. Transmission main shift lever
• 3.5. EXTERIOR CONTROLS
• 3.5.1. Hood release lever
• 4. OPERATING INSTRUCTIONS
• 4.1. COMMISSIONING THE UNIT
• 4.1.1. Engine breakin procedure
• 4.1.2. Power TakeOff (PTO) operation
• 4.1.3. Threepoint linkage
• 4.1.4. Attaching threepoint equipment
• 4.1.5. Extendable drawbar
• 4.1.6. Top link
• 4.1.7. Hydraulic Power Lift (HPL) drop rate control valve
• 4.2. STARTING THE UNIT
• 4.2.1. Key switch
• 4.2.2. Cold starting aids
• 4.2.3. Starting the engine
• 4.2.4. Operator presence system
• 4.2.5. Starting the tractor with jumper cables
• 4.3. STOPPING THE UNIT
• 4.3.1. Stopping the engine
• 4.3.2. Emergency stopping
• 4.3.3. Brakes
• 4.4. MOVING THE UNIT
• 4.4.1. Steering wheel adjustment
• 4.4.2. Steering operation
• 4.4.3. Transmission operation at low ambient temperatures
• 4.4.4. HydroStatic Transmission (HST) operation
• 4.4.5. x 12 Synchronized transmission operation
• 4.5. PARKING THE UNIT
• 4.5.1. Parking the tractor
• 5. TRANSPORT OPERATIONS
• 5.1. ROAD TRANSPORT
• 5.1.1. External lighting identification
• 5.1.2. Hazard warning light operation
• 5.1.3. Turn signal operation
• 5.1.4. Road lights operation
• 5.1.5. Work lights operation
• 5.1.6. Rear work light (optional)
• 5.1.7. Driving the vehicle
• 5.2. SHIPPING TRANSPORT
• 5.2.1. Carrying the tractor on a transporter
• 5.3. RECOVERY TRANSPORT
• 5.3.1. Towing
• 6. WORKING OPERATIONS
• 6.1. GENERAL INFORMATION
• 6.1.1. Tractor ballasting
• 6.1.2. Tractor ballasting weights
• 6.1.3. Liquid ballast
• 7. MAINTENANCE
• 7.1. GENERAL INFORMATION
• 7.1.1. General information
• 7.1.2. Battery disconnect switch
• 7.1.3. General specification Diesel fuel
• 7.1.4. Biodiesel fuel
• 7.1.5. Basic instructions Refueling the tractor
• 7.1.6. Change engine coolant to Organic Acid Technology (OAT) coolant
• 7.1.7. Torque Minimum tightening torques for normal assembly
• 7.1.8. Fluids and lubricants
• 7.2. MAINTENANCE CHART
• 7.2.1. Maintenance chart
• 7.3. Every 10 hours or daily
• 7.3.1. Engine oil level Check
• 7.3.2. Engine cooling system Check
• 7.4. After first 50 hours
• 7.4.1. Engine oil and oil filter Change
• 7.4.2. Fuel filter Replace
• 7.4.3. Hydraulic oil filter Replace Hydraulic system
• 7.4.4. Hydrostatic Transmission (HST) oil filter Replace
• 7.4.5. Roll Over Protective Structure (ROPS) Check
• 7.4.6. Wheel bolts and nuts Check
• 7.5. Every 50 hours
• 7.5.1. Grease fitting Lubrication
• 7.5.2. Transmission fluid level Check
• 7.5.3. Clutch pedal free play Check
• 7.5.4. Brake pedal free play Check
• 7.5.5. Hydrostatic Transmission (HST) neutral position Check and Adjustment
• 7.5.6. Fan belt tension Check
• 7.5.7. Tire pressure Check
• 7.5.8. Front axle differential fluid level Check
• 7.5.9. Air cleaner Clean Primary element
• 7.6. Every 100 hours
• 7.6.1. Fuel filter water separator Drain fluid
• 7.7. Every 300 hours
• 7.7.1. Engine oil and oil filter Change
• 7.7.2. Hydraulic oil filter Replace Hydraulic system
• 7.7.3. Hydrostatic Transmission (HST) oil filter Replace HST system
• 7.7.4. Fuel filter Replace
• 7.7.5. Fan belt Adjust
• 7.7.6. Roll Over Protective Structure (ROPS) Check Maintenance and inspection
• 7.7.7. Wheel bolts and nuts Check
• 7.7.8. Front wheel toe in Check
• 7.7.9. Air cleaner element Replace
• 7.8. Every 600 hours
• 7.8.1. Front axle differential oil Change fluid
• 7.8.2. Transmission fluid Change Rear axle and hydraulic system
• 7.9. Every 1000 hours
• 7.9.1. Air cleaner element Replace
• 7.9.2. Engine coolant Change
• 7.10. General maintenance
• 7.10.1. Fuel injection system Bleed
• 7.10.2. Fuel injectors Bleed
• 7.10.3. Hydrostatic transmission control components Adjust Neutral
• 7.10.4. Fan belt Adjust
• 7.10.5. Roll Over Protective Structure (ROPS) Check Possible damage
• 7.10.6. Battery Test
• 7.10.7. Alternator and drive belt Check
• 7.10.8. Fuses Check
• 7.10.9. Maxi fuse Replace
• 7.10.10. Headlight bulb Replace
• 7.10.11. Tail/brake light bulb Replace
• 7.10.12. Turn signal/hazard light bulb Replace
• 7.10.13. Wheel bolts and nuts Check
• 7.10.14. Front wheels toe in Check
• 7.10.15. Brake pedal free play Adjust
• 7.10.16. Clutch pedal free play Adjust
• 7.11. STORAGE
• 7.11.1. Preparing for storage
• 7.11.2. Removal from storage
• 8. TROUBLESHOOTING
• 8.1. SYMPTOM(S)
• 8.1.1. Engine Troubleshooting
• 8.1.2. Clutch Troubleshooting
• 8.1.3. Hydraulic service brakes Troubleshooting
• 8.1.4. Hydraulic Lift System Troubleshooting
• 8.1.5. Steering Troubleshooting
• 8.1.6. Hydrostatic transmission Troubleshooting
• 8.1.7. Electrical system Troubleshooting
• 9. SPECIFICATIONS
• 9.1. Wheel tread settings
• 9.2. Tire pressures and permissible loads
• 9.3. Liquid ballast
• 9.4. General specifications
• 9.5. Tractor dimensions
• 10. ACCESSORIES
• 10.1. Optional equipment
• 11. FORMS AND DECLARATIONS
• 11.1. Delivery report Owner copy
• 11.2. Delivery report Dealer copy