New Holland 6810 Tier 3 Tractor Operation and Maintenance Manual 48032414

$20.00

  • Type Of Manual: Operation and Maintenance Manual
  • Manual ID: 48032414
  • Format: PDF
  • Size: 23.8MB
  • Number of Pages: 242
  • Serial Number:
    48032414

Description

  • Model List:

    • 6810 Tier 3 Tractor
  • 1. GENERAL INFORMATION
  • 1.1. Note to the owner
  • 1.2. Intended use
  • 1.3. ElectroMagnetic Compatibility (EMC)
  • 1.4. Product identification
  • 1.5. Operators manual storage on the machine
  • 1.6. Machine orientation
  • 1.7. Machine components
  • 2. SAFETY INFORMATION
  • 2.1. Safety rules and signal word definitions
  • 2.2. Safety rules
  • 2.3. Ecology and the environment
  • 2.4. Safety features
  • 2.5. Safety signs
  • 2.6. Informational decals
  • 3. CONTROLS AND INSTRUMENTS
  • 3.1. Access to operators platform
  • 3.1.1. Proper entry and exit
  • 3.2. Operators seat
  • 3.2.1. Operator seat adjustments
  • 3.2.2. Seat belt operation
  • 3.3. Forward controls
  • 3.3.1. Instrument panel
  • 3.3.2. Front console
  • 3.3.3. Foot pedals
  • 3.3.4. Transmission controls
  • 3.4. Lefthand side controls
  • 3.4.1. Power TakeOff (PTO)
  • 3.5. Righthand side controls
  • 3.5.1. Parking brake
  • 3.5.2. Differential lock pedal
  • 3.5.3. Hydraulic controls
  • 3.6. Rearward controls
  • 3.6.1. Rear work light
  • 3.7. Display
  • 3.7.1. Analog/Digital Instrument Cluster (ADIC)
  • 3.7.2. Warning and status indicators
  • 4. OPERATING INSTRUCTIONS
  • 4.1. Commissioning the unit
  • 4.1.1. Run in period of a new machine
  • 4.1.2. Multifunctional light switch
  • 4.2. Starting the unit
  • 4.2.1. Starting the engine
  • 4.3. Stopping the unit
  • 4.3.1. Stopping the tractor
  • 4.4. Moving the unit
  • 4.4.1. General transmission operation
  • 4.4.2. Steering control
  • 5. TRANSPORT OPERATIONS
  • 5.1. Road transport
  • 5.1.1. Basic instructions
  • 5.1.2. High visibility position markers
  • 5.2. Recovery transport
  • 5.2.1. Towing the tractor
  • 6. WORKING OPERATIONS
  • 6.1. Tires and wheels
  • 6.1.1. Tire load and inflation charts
  • 6.1.2. Tractor ballasting
  • 6.1.3. Liquid ballast
  • 6.1.4. Front wheel tread settings
  • 6.1.5. Rear wheel tread settings
  • 6.2. Driveline
  • 6.2.1. Creeper gears
  • 6.2.2. FourWheel Drive (4WD)
  • 6.2.3. Differential lock
  • 6.2.4. Front axle oscillation
  • 6.3. Hydraulic system
  • 6.3.1. Open center remote valves
  • 6.3.2. Closed center (Deluxe) remote valves
  • 6.3.3. Hydraulic Power Lift (HPL)
  • 6.3.4. Hydraulic remote control valves
  • 6.3.5. Connecting remote cylinders
  • 6.3.6. Bleeding remote cylinders
  • 6.3.7. Operating singleacting hydraulic cylinders
  • 6.3.8. Operating doubleacting hydraulic cylinders
  • 6.3.9. Hydraulic remote control valves
  • 6.3.10. Connecting remote cylinders
  • 6.3.11. Bleeding remote cylinders
  • 6.3.12. Operating singleacting hydraulic cylinders
  • 6.3.13. Operating doubleacting hydraulic cylinders
  • 6.3.14. Operating continuous flow hydraulic equipment
  • 6.4. Implements
  • 6.4.1. Adjusting the drawbar
  • 6.4.2. Hitch operation
  • 6.4.3. Power TakeOff (PTO) operation
  • 7. MAINTENANCE
  • 7.1. General information
  • 7.1.1. Safety rules Machine service access
  • 7.1.2. Warranty notice
  • 7.1.3. Jacking points
  • 7.1.4. Opening the hood
  • 7.1.5. Fueling the machine
  • 7.1.6. General specification Biodiesel fuels
  • 7.1.7. Torque Minimum tightening torques for normal assembly
  • 7.1.8. Standard torque data for hydraulics
  • 7.1.9. Organic Acid Technology (OAT) coolant
  • 7.1.10. Fluid capacities and lubricants
  • 7.1.11. Engine oil Recommended engine oil for operating temperature ranges
  • 7.2. Maintenance planning
  • 7.2.1. Maintenance chart
  • 7.3. Warning light on
  • 7.3.1. Engine air filter (outer element) Clean
  • 7.3.2. Water separator Drain fluid
  • 7.4. Every 10 hours or daily
  • 7.4.1. Engine oil Level make up
  • 7.4.2. Radiator, oil cooler, and air cooler Clean
  • 7.4.3. Engine cooling system Level make up
  • 7.4.4. Water separator Drain fluid
  • 7.5. First 50 hours
  • 7.5.1. Transmission and hydraulic oil filter Replace
  • 7.5.2. Engine oil and oil filter Change
  • 7.6. Every 50 hours
  • 7.6.1. Tire pressure Check
  • 7.6.2. Transmission, rear axle, and hydraulic system oil Level make up
  • 7.6.3. FourWheel Drive (4WD) front axle differential oil Level make up
  • 7.6.4. FourWheel Drive (4WD) front axle hub oil Level make up
  • 7.6.5. Fuel filter water separator Drain fluid
  • 7.6.6. Wheel hardware Check
  • 7.6.7. Grease points Grease
  • 7.6.8. Clutch pedal free play Adjust
  • 7.7. Every 300 hours
  • 7.7.1. Transmission, rear axle, and hydraulic system oil Change fluid
  • 7.7.2. Transmission and hydraulic oil filter Replace
  • 7.7.3. Engine oil and oil filter Change
  • 7.7.4. Final drive housing oil Level make up
  • 7.7.5. Clutch pedal free play Adjust
  • 7.7.6. Parking brake Adjust
  • 7.7.7. Brake pedal Adjust
  • 7.7.8. Alternator drive belt Adjust
  • 7.7.9. Fuel filter Replace
  • 7.8. Every 600 hours
  • 7.8.1. Transmission, rear axle, and hydraulic system oil Change fluid
  • 7.8.2. Front axle hubs (2WD) Clean
  • 7.8.3. Engine air filter (outer element) Replace
  • 7.9. Every 1200 hours or annually
  • 7.9.1. Engine air filter (inner element) Replace
  • 7.9.2. FourWheel Drive (4WD) front axle differential oil Change fluid
  • 7.9.3. FourWheel Drive (4WD) front axle hub oil Change fluid
  • 7.9.4. Final drive housing oil Change fluid
  • 7.9.5. Engine valves clearance Check and adjust
  • 7.10. Every 2000 hours
  • 7.10.1. Fuel injector spray Check
  • 7.11. Every 4000 hours or four years
  • 7.11.1. Engine coolant Change fluid
  • 7.12. As required
  • 7.12.1. Headlight bulb Replace
  • 7.12.2. Work light bulb Replace
  • 7.12.3. Front light bulb Replace
  • 7.12.4. Rear light bulb Replace
  • 7.12.5. Steering stops Adjust
  • 7.12.6. Steering toein Adjust
  • 7.12.7. Parking brake Adjust
  • 7.13. Fuse and relay locations
  • 7.13.1. Chassis fuse box
  • 7.14. Storage
  • 7.14.1. Preparing for storage
  • 7.14.2. Removal from storage
  • 8. TROUBLESHOOTING
  • 8.1. Symptom(s)
  • 8.1.1. Engine
  • 8.1.2. Transmission
  • 8.1.3. Electrical system
  • 8.1.4. Hydraulic system
  • 8.1.5. Hydraulic remote control valves
  • 8.1.6. Threepoint hitch
  • 9. SPECIFICATIONS
  • 9.1. Length and height
  • 9.2. Width
  • 9.3. Ground clearance
  • 9.4. Maximum side slope operation
  • 9.5. Power TakeOff (PTO)
  • 9.6. Hydraulic system
  • 9.7. Threepoint linkage
  • 9.8. Brake system
  • 9.9. Steering system
  • 9.10. Electrical system
  • 9.11. Fluid capacities and lubricants
  • 10. ACCESSORIES
  • 10.1. Roll Over Protective Structure (ROPS)
  • 10.2. Hitch
  • 10.3. Fuel filter water separator
  • 11. FORMS AND DECLARATIONS
  • 11.1. Delivery report Owner copy
  • 11.2. Delivery report Dealer copy
Rate this product
Reviews

There are no reviews yet.

Be the first to review “New Holland 6810 Tier 3 Tractor Operation and Maintenance Manual 48032414”

Your email address will not be published. Required fields are marked *