New Holland TD65F, TD75F, TD85F Tractor Operation and Maintenance Manual 48096378

New Holland TD65F, TD75F, TD85F Tractor Operation and Maintenance Manual 48096378 - Image 2

New Holland TD65F, TD75F, TD85F Tractor Operation and Maintenance Manual 48096378 - Image 3

New Holland TD65F, TD75F, TD85F Tractor Operation and Maintenance Manual 48096378 - Image 4

New Holland TD65F, TD75F, TD85F Tractor Operation and Maintenance Manual 48096378 - Image 5

new holland td65f td75f td85f tractor operation and maintenance manual 48096378 2

new holland td65f td75f td85f tractor operation and maintenance manual 48096378 3

New Holland TD65F, TD75F, TD85F Tractor Operation and Maintenance Manual 48096378

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: 48096378
Format: PDF
Size: 9.6MB
Number of Pages: 180
Serial Number:
48096378

Category: New Holland Operator Manual PDF

Model List:
- TD65F Tractor
- TD75F Tractor
- TD85F Tractor

1. GENERAL INFORMATION
1.1. Electromagnetic interference (EMC)
1.2. Note to the Owner
1.3. Identification from the machine
1.4. Ecology and the Environment
1.5. Advice
1.6. Noise levels
1.7. Operating tips
1.8. International symbols
2. SAFETY INFORMATION
2.1. Safety rules
2.2. Roll Over Protective Structure (ROPS) Foldable
2.3. Before operating the machine
2.4. Driving the vehicle
2.5. Operation of Power TakeOff (PTO)
2.6. Maintenance
2.7. Diesel fuel
2.8. Fire or Explosion Prevention
2.9. Intended use statement
2.10. Safety decals
3. CONTROLS AND INSTRUMENTS
3.1. ACCESS TO OPERATORS PLATFORM
3.1.1. General check
3.2. OPERATORS SEAT
3.2.1. Operator Seat
3.2.2. Seat belt
3.3. FORWARD CONTROLS
3.3.1. Instrument panel
3.3.2. Ignition switch
3.3.3. Console controls
3.3.4. Righthand control lever
3.3.5. Pedal controls
3.3.6. Steering column
3.4. LEFTHAND SIDE CONTROLS
3.4.1. Lefthand side controls
3.5. RIGHTHAND SIDE CONTROLS
3.5.1. Right hand side controls
3.6. INSTRUMENT CLUSTER
3.6.1. Instrument panel and indicators
3.6.2. Gauges
4. OPERATING INSTRUCTIONS
4.1. COMMISSIONING THE UNIT
4.1.1. General instructions
4.1.2. Filling the fuel tank
4.2. STARTING THE UNIT
4.2.1. Cold starting aids (if equipped)
4.2.2. Booster battery procedure
4.2.3. Starting the engine
4.3. STOPPING THE UNIT
4.3.1. Stopping the engine
5. TRANSPORT OPERATIONS
5.1. PREPARING FOR ROAD TRANSPORT
5.1.1. Machine loading in a transporter
5.2. RECOVERY TRANSPORT
5.2.1. Machine towing
6. WORKING OPERATIONS
6.1. GENERAL INFORMATION
6.1.1. Traction Auxiliary front wheel drive (AFWD) with electrohydraulic controls
6.1.2. Electrohydraulic control Program
6.1.3. Differential lock system
6.1.4. Differential lock system LIMSLIP (optional)
6.2. TRANSMISSION
6.2.1. Mechanical transmission (12×12) version
6.2.2. Mechanical transmission (20×12) version
6.2.3. Travel speeds (12×12) version
6.2.4. Travel speeds (20×12) version
6.3. POWER TAKE OFF (PTO)
6.3.1. Operating precautions
6.3.2. Power TakeOff (PTO) Program independent
6.3.3. Power TakeOff (PTO) Program
6.3.4. Power TakeOff (PTO) Speeds (12×12 Synchro Command) 540 RPM version
6.3.5. Power TakeOff (PTO) Speeds (20×12 Synchro Command) 540 RPM version
6.3.6. Power TakeOff (PTO) Speeds (20×12 Synchro Command) 750 RPM version
6.4. REAR HITCH
6.4.1. Rear hitch mount
6.4.2. Main lift system Adjust of the hydraulic lift
6.4.3. Hydraulic systems Program Use of hydraulic system levers
6.5. THREEPOINT HITCH
6.5.1. Threepoint hitch
6.5.2. Setups of the threepoint hydraulic lift
6.5.3. Rear threepoint hitch Program of the hydraulic system
6.6. HYDRAULIC REMOTE CONTROL VALVES
6.6.1. Valve couplers and connections
6.6.2. OPERATING WITH REMOTE VALVES
6.7. WHEEL TRACK ADJUSTMENT
6.7.1. Wheel tread settings
6.7.2. Front wheel alignment
6.7.3. Front wheel fenders
6.8. BALLASTING AND TIRES
6.8.1. Tire care Wheels
6.8.2. Tires
6.8.3. Tires Acceptable pressures and loads
6.8.4. Tires
6.8.5. Ballasting solid
6.8.6. Liquid ballast
6.8.7. MAXIMUM PERMISSIBLE WEIGHTS
7. MAINTENANCE
7.1. GENERAL INFORMATION
7.1.1. Introduction
7.1.2. Fuel handling precautions
7.1.3. Diesel fuel
7.1.4. Specifications Biodiesel fuel
7.1.5. Fluids and lubricants
7.1.6. Basic instructions from the machine
7.1.7. Protective devices
7.1.8. Opening the hood
7.2. MAINTENANCE CHART
7.2.1. Maintenance chart
7.3. WHEN THE WARNING LAMP LIGHTS
7.3.1. Engine air filter Cleaning
7.3.2. Brake fluid level Check
7.4. EVERY 10 HOURS OR DAILY
7.4.1. Checking the engine oil level
7.5. FIRST 50 HOURS
7.5.1. First 50 Hour Service
7.6. EVERY 50 HOURS
7.6.1. Lubrication points
7.6.2. Lubrication points
7.7. EVERY 300 HOURS
7.7.1. Change engine oil and filter
7.7.2. Replacement of fuel filter
7.7.3. Hydraulic oil filter
7.7.4. Fuel transfer pump Cleaning
7.7.5. Engine air filter
7.7.6. Battery Cleaning
7.7.7. Hydraulic oil level transmission Check
7.7.8. Front axle differential and hubs Check the oil level
7.7.9. Park brake Adjust
7.7.10. Engine fan belt Adjustment
7.7.11. Engine Oil Filter
7.8. EVERY 600 HOURS
7.8.1. Fuel injection system Cleaning
7.8.2. Front axle hub oil Change fluid
7.8.3. Wheel nuts tightening torque
7.9. EVERY 1200 HOURS OR ANNUALLY
7.9.1. Engine valve clearance Check
7.9.2. Engine air filters Replace
7.9.3. Fuel tank Cleaning
7.9.4. Front axle drive shaft Check
7.9.5. Front Axle Oil Changing fluid
7.10. EVERY 1200 HOURS OR EVERY 2 YEARS
7.10.1. Fuel injectors Check
7.10.2. Radiator drain and flush
7.10.3. Transmission oil Replace
7.11. GENERAL MAINTENANCE
7.11.1. Clutch Adjust pedal play
7.11.2. FOOT CONTROL PEDAL ADJUSTMENT Adjust
7.11.3. Engine fan belt Adjustment
7.11.4. Engine air filter system Cleaning the discharge valve
7.11.5. Expansion tank Filling
7.11.6. Work light Check
7.11.7. Park brake Adjust
7.11.8. Cleaning the radiators
7.11.9. Tire inflation
7.11.10. Fuel system Bleed
7.11.11. Brakes Air bleeding
7.11.12. Battery
7.11.13. Fuses and relay box
7.11.14. HEADLIGHT AND WORKLAMP ADJUSTMENT
7.11.15. Lamp bulb replacement
7.11.16. General recommendations for maintenance of the body
7.12. STORAGE
7.12.1. Storing the machine
7.12.2. Preparation for use after storage
8. TROUBLESHOOTING
8.1. SYMPTOM(S)
8.1.1. Troubleshooting
9. SPECIFICATIONS
9.1. Machine overall dimensions
9.2. Fluids and lubricants
9.3. Engine
9.4. Transmission
9.5. Power TakeOff (PTO)
9.6. Hydraulic System
9.7. Brakes
9.8. Electrical system
10. ACCESSORIES
10.1. Rotating beacon light (if equipped)
10.2. Setups chaintype stabilizer
10.3. SWINGING DRAWBARS
10.4. Pivot pin

Rate this product