Yanmar SD20, SD50, SD50-4T Sail Drive Operation Manual 0ASDM-G00101

Description

• Model List:
  • SD20, SD50, SD50-4T Sail Drive

• 1. Introduction
• 1.1. Safety Precautions
• 1.1.1. General Information
• 1.1.2. Before You Operate
• 1.1.3. During Operation and Maintenance
• 2. Product Overview
• 2.1. Overview
• 2.1.1. Owner / Operator Responsibilities
• 2.1.2. New Sail-Drive Break-In
• 2.1.3. Dealer / Distributor Responsibilities
• 2.2. Component Identification
• 2.3. Galvanic Corrosion
• 2.4. Corrosion Control
• 2.5. Shore Power
• 2.6. Underwater Drive Coating
• 3. Before You Operate
• 3.1. Propeller Selection
• 3.1.1. Recommended Propeller Size (Maximum)
• 3.1.2. Fitting a Fixed Propeller (2-Blade)
• 3.2. Lubricating Oil
• 3.3. Filling With Lubricating Oil – SD20, SD50 and SD50-4T
• 3.4. Checking the Instrument Panel Alarm System
• 3.5. Daily Checks
• 3.5.1. Visual Checks
• 4. Sail-Drive Operation
• 4.1. Remote Control Device Check
• 4.1.1. SD50 / SD50-4T
• 4.2. Engine Cooling Water
• 4.2.1. SD50 / SD50-4T
• 5. Periodic Maintenance
• 5.1. Tightening Fasteners
• 5.2. Torque Charts
• 5.2.1. Standard Torque Values
• 5.2.2. Standard Torque Chart
• 5.2.3. Periodic Maintenance
• 5.3. Periodic Maintenance Table
• 5.4. When The Vessel Is Out Of The Water, Perform The Following
• 5.4.1. Removing Deposits From The Lower Gear Case
• 5.4.2. Repairing Damaged Coating
• 5.4.3. Inspecting the Anode
• 5.4.4. Inspecting The Folding Propeller
• 5.4.5. Draining Water
• 5.5. Periodic Maintenance Procedures
• 5.5.1. After Initial 50 Hours of Operation
• 5.5.2. Every 100 Hours of Operation
• 5.5.3. Every 250 Hours of Operation
• 5.5.4. Every 500 Hours of Operation
• 5.5.5. Every Year
• 5.5.6. Every 2000 Hours of Operation
• 5.5.7. Every 5 Years
• 6. Specifications
• 7. System Diagrams
• 7.1. Maintenance Log