Yanmar ViO15-2 Excavator Service Manual

Description

• Model List:
  • ViO15-2 Excavator

• 1. SM ViO15-2 (chap7-11).pdf
• 1.1. CHAPTER 7 ADJUSTMENT AND REPAIR
• 1.1.1. Adjustment and Repair
• 1.1.1.1. Electric Equipment of Machine
• 1.1.1.1.1. Parts Layout of Electrical Equipment
• 1.1.1.1.2. Monitor and Alarm Systems
• 1.1.1.1.3. Wiring Diagram
• 1.1.1.1.4. Circuit Description of Engine Start and Stop, and Battery Charging
• 1.1.1.1.5. Removal and Reinstallation of Engine
• 1.1.1.1.6. Removal and Reinstallation of Starter Motor
• 1.1.1.1.7. Removal and Reinstallation of Fuel Injection Pump
• 1.1.1.1.8. Removal and Reinstallation of Fuel Tank
• 1.1.1.1.9. Removal and Reinstallation of Radiator
• 1.1.1.2. Undercarriage
• 1.1.1.2.1. Outline
• 1.1.1.2.2. Points of Reassembly
• 1.1.1.2.3. Crawler Tension Adjustment Procedure
• 1.1.1.2.4. Removal and Reinstallation of Crawler
• 1.1.1.2.5. Disassembly and Reassembly of Idler
• 1.1.1.2.6. Disassembly and Reassembly of Track Roller
• 1.1.1.2.7. Removal and Reinstallation of Track Gauge Change Cylinder
• 1.1.1.3. Controls
• 1.1.1.3.1. Control Train
• 1.1.1.3.2. Mechanical Control Linkage
• 1.1.1.3.3. Adjustment of Control Levers
• 1.1.1.3.4. Adjustment of Travel Levers
• 1.1.1.3.5. Adjustment of Boom Swing Pedal
• 1.1.1.3.6. Adjustment of Blade Lever
• 1.1.1.3.7. Adjustment of Lock Lever Switch
• 1.1.1.3.8. Adjustment of Track Gauge Change Control Lever
• 1.1.1.3.9. Adjustment of Accelerator Lever
• 1.1.1.3.10. Adjustment of P.T.O. Pedal
• 1.1.1.3.11. Adjustment Procedure of Travel Alarm Switch (Left and Right)
• 1.1.1.4. Swing Bearing
• 1.1.1.5. Hydraulic Equipment
• 1.1.1.5.1. Removal and Reinstallation of Hydraulic Pump
• 1.1.1.5.2. Removal and Reinstallation of Control Valve
• 1.1.1.5.3. Removal and Reinstallation of Swing Motor
• 1.1.1.5.4. Removal and Reinstallation of Swivel Joint
• 1.1.1.5.5. Disassembly and Reassembly of Swivel Joint
• 1.1.1.5.6. Disassembly and Reassembly of Hydraulic Cylinders
• 1.1.1.5.7. Hydraulic Oil Tank
• 1.1.1.5.8. Piping Layout
• 1.1.1.6. Implement
• 1.1.1.6.1. Removal and Reinstallation of Implement
• 1.2. CHAPTER 8 PERIODIC INSPECTION AND SERVICING
• 1.2.1. Periodic Inspection and Servicing
• 1.2.1.1. List of Periodic Inspection and Servicing
• 1.3. CHAPTER 9 FUEL, LUBE OIL AND GREASE RECOMMENDED
• 1.3.1. Fuel, Lube Oil and Grease Recommended
• 1.4. CHAPTER 10 TROUBLESHOOTING
• 1.4.1. Troubleshooting
• 1.4.1.1. Non-Breakdowns
• 1.4.1.1.1. Natural Release of Bucket
• 1.4.1.1.2. Discontinuous Arm Movement
• 1.4.1.1.3. Drifting of Upperstructure on Quick Travel Operation
• 1.4.1.1.4. Thermal Shock of Travel Motor
• 1.4.1.1.5. Change of Blade Speed in Loaded Condition
• 1.4.1.1.6. Time Lag on Travel Speed Switching
• 1.4.1.1.7. Fluctuation in Oil Level of Hydraulic Oil Tank Due to Temperature Change
• 1.4.1.2. Troubleshooting
• 1.4.1.2.1. Machine and Engine
• 1.4.1.2.2. Electrical Equipment on Panel
• 1.5. CHAPTER 11 REFERENCE DATA
• 1.5.1. Reference Data
• 1.5.1.1. Specifications for Attachment
• 1.6. COLOPHON
• 1.7. SPINE TITLE